Coopers RCP-A1 User manual

Brand: Coopers

Model: RCP-A1

Type: User manual

Coopers RCP-A1 is a portable tire air compressor that can inflate not only car tires but also those of motorcycles, bicycles, rafts, air mattresses, and sports balls. It is very easy to operate. With the digital pressure gauge, you preset the target pressure and the unit will automatically turn off when the target pressure is reached. This is useful because you won't have to keep an eye on the pressure gauge while inflating, or worry about overinflating. The device has a power cord length of approximately 3.

Instructions

A. For tyres of cars,

motorcycles, etc:

1. Plug the cigarette lighter

into car 12vDC socket.

2. Screw the valve connector

clockwise onto the tyre valve

stem. Make sure the

connection is well made.

3. Set the target pressure

value (please refer to: How

to Use Digital Gauge).

4. Press On/Off, the device

starts to work.

5. The device will stop

working automatically when

reaching the preset value.

6. Release On/Off.

7. Remove and store the air

hose in the storage

compartment provided.

B. For air mattress, footballs,

children play raft, etc:

1. Select the proper adapter and insert

into the Connector.

2. Insert the connected adapter into the

appropriate receiver on the inflatable.

3. Follow the same steps as instruction A.

4. Check for proper firmness and adjust as

needed.

5. Remove the adapter from the

Connector.

C. The LED light has 3

functions:

1. Turn the knob to LIGHT, the light is for

illuminating a work area.

2. Turn the knob to FLASH, this function is

to alert other road users to a potential

hazard.

3. Turn the knob to SOS, the light will flash

the SOS distress signal.

LED Lights

Digital Tyre

Guage

Stem

ON/OFF

Lights

Switch

Air

Hose

Portable Tyre Air Compressor User Manual

Adaptor for

sports ball

Adaptor for air

mattress and raft

Cigarette Lighter

Connector

M (1) Switch units of pressure among Bar,

KPA and Psi.

(2) Release the gauge from measuring status to

reading status.

Instruction

1. Presetting the target value

(1) Hold + or - for more than 5 seconds

until LCD display flashes. This figure is the

previous pre-set value (default: 30Psi).

Press + or - until the value is set to the

new target pressure level, and wait 2-3

seconds. The LCD will display the current

pressure value.

(2) Press M, the LCD displays "ON" this

indicates the device is ready to start working.

+ Increase preset pressure.

- Decrease preset pressure .

ON/OFF Switch off the device

How to Use Digital Gauge

2. Inflating:

Press ON/OFF, the device starts to work until

the target pressure is reached. The device

automatically switches off and LCD displays

"OFF".

Note: In case of emergency the device can be

manually switched off during use.

3. Inflating other items:

(1) If other items require a different pressure

value, repeat the steps mentioned above.

(2) If other items require the same pressure

value as has already been preset, press M and

then ON/OFF, and the device works again.

Please read, understand and follow

the instructions provided with this

device. The user must have an

understanding of the product and

its safe operation before use.

The Portable Tyre Air Compressor is a

multifunction compressor, designed for

cars, motorcycles, bicycles, rafts, air

mattresses and sports balls is very easy

to operate. With the digital pressure

gauge, you preset the target pressure

and the unit will automatically turn off

when the target pressure is reached.

Caution

1. Inspect before each use. Do not use if

bent, broken cables are showing heat

damage, burnt or otherwise damaged

components are seen.

2. Check the tyre pressure before inflating

and never exceed rated pressure of the item

being inflated. If rated pressure is exceeded,

the item being inflated may over inflate and

be damaged.

3. Do not bend the air hose while the device

is working.

4. Never turn off the car engine when the

device is working, otherwise the car battery

may run down.

5. Do not use continuously for more than 30

minutes. When 30 minutes is reached, turn off

and let it cool for 15 minutes before using it

again.

6. If the device is making an abnormal sound

or its temperature is too high, turn off the

power at once and let it cool for at least 30

minutes before trying again. Improper use will

result in damage to the device.

7. Do not leave device operating whilst

unattended, and keep out of the reach of

children.

8. Store the device in it’s case in a dry place

whilst not in use.

9. This device contains a DC motor and

components which may arc during normal

operation. Do not use near to flammable

liquid or gas/petrol vapour.

10. Never put the connector and adapters into

mouth, ear or eyes, this is not a toy.

Warning

1. Always use the device according to the

instruction for the sake of your safety. Other

ways of use not mentioned in the manual may

result in injury.

2. No alterations shall be made to this device.

Only adapters supplied by the manufacturer

shall be used.

3. If vehicle fuse is blown, only replace with

fuse of identical rating.

Specifications

1. Power Supply: 12 VDC

2. Full load draw: 10A

3. No load draw 5A

4. Working capacity: takes less than 5

minutes 30 seconds to inflate a 205/70R14

tyre from 0 to 36 Psi

5. Measurement range: 0.5-120 Psi

6. Measurement accuracy:

1 Psi

–

1 Psi

7. Power cord length: Aprox. 3.2m

8. Air hose length: 600mm

9. Operation temperature: -20° to 60°

10. Dimension: 185x176x77mm

11. Weight: 1.1Kg

Portable Tyre Air Compressor User Manual

Portable Tyre Air Compressor

User Manual

(Model RCP-A1)

Coopers RCP-A1 User manual

Coopers RCP-A1 User manual

Coopers RCP-A1 User manual

Other documents