Tyan Transport GX18 Quick Installation Manual

Tyan
Brand
Tyan
Model
Transport GX18
Category
Motherboards
Type
Quick Installation Manual
Transport GX18 Quick Installation Guide
3. Installing PCI-E Card
Document # D1771-100
5. Rack Mounting
Step 2: Lift and mount the chassis into the rack. Secure
the chassis with two screws onto each side of the rack.
Step 4: Connect the PCI-E card with the riser
card .
2. Installing HDD
Step 1: Use a screw driver to release the screw
securing the bracket.
Step 3: Install the PCI-E riser card into the
PCI-E 8x slot.
Step 2: Follow the directions below to take off the
bracket.
1. Screws List
Right: M3 x L4
Middle: #6 x 32 x L5
Left: M5 x L4
Step 3: Secure the mounting plate with 2 screws
onto each side of chassis.
Step 5: Screw to secure the PCI-E card.
Step 4: Secure the mounting plate with 2 screws onto each back side of the rack.Step 1: Measure the distance of inner side between the
front and rear mounting brackets in the rack. Secure the
mounting plate to the chassis with two screws for each
side.
Step 1: Remove the cover and unscrew the HDD
tray.
Step 3: Screw the SATA HDD to the tray.
Step 2: Take out the HDD tray and
insert the SATA HDD into the tray.
Step 4: Connect the SATA HDD cable and power
cord.
Step 5: Put down the HDD tray and push
it backward to lock. Screw the HDD tray
to the chassis.
Enclosure
Industry 1U rack-mount chassis
Dimension: W 17.13” x D 15.47” x H 1.73”
(W 435mm x D 393mm x H 43.5mm)
HDD Tray:
Function Remark
Trophy NR18
3.5” HDD x 1 SATA or IDE
Transport GX18 2.5” HDD x 2 SATA only
CD-ROM x 1 Slim-Type
Processor
Intel 479-pin socket x 2, support Dual Intel Sossaman (dual core) 2.0GHz
CPU or higher
Supports FSB 667MHz
Chipset
Intel 7520 Memory Controller Hub
Intel 6300ESB Controller Hub
Intel 82551QM FE LAN Controller
Intel 82571EB Gigabit LAN Controllers
Memory
240-pin DDR2 socket x 8, supports 256MB ~ 2GB DIMM and up to 16 GB
memory capacity.
Dual channel memory bus (must be populated in pairs)
Supports ECC Registered DDR2 400 memory
Graphics
ATi ES-1000 graphics controller with up to 16MB memory capacity
Expansion Slot
PCI-E 8X slot x 1, support external output PCI-E card with 1-to-1 Riser Card
Storage
Supports 50-pin Compact Flash Type II x 1
40-pin IDE Connector x 1 supports 3.5” IDE HDD
SATA1 connector x 2
Front / Rear (NR18/GX18) Panel I/O Ports
Serial port with D-Sub 9 pin connector x 1
D-Sub 15 pin VGA Port x 1
Two USB 2.0 ports with a dual-stacked USB connector + RJ-45 x 1
RJ-45 LAN connector includes Transformer & LED x 2 (Dual Stacked)
Dual PS2 ports for Keyboard & Mouse
GX18 Front Panel I/O Port
Slim type CD-ROM x 1 (Option)
System Management
System Fan speed control and tachometer monitoring
Monitoring voltages for CPU, Memory & Power Supply
Monitoring temperature for CPU & environment
BIOS
Phoenix BIOS® with 8Mbit Flash ROM
Supports ACPI 2.0
Power-on mode control for AC power loss recovery
WOL and PXE supported (by Intel 82551QM only)
LED Daughter Board Definitions
Function Remark
LED Power on indication x 1 Blue
HDD activity indication x 1 Yellow
Alarm indication x 1 Red
LAN activity indication x 2 Green
Button Power on x 1
Reset x 1
Alarm Reset x 1
IO USB 2.0 x 2 Dual Stack
System Cooling
Passive Al CPU Heatsink x 2
4028 (9,200rpm) System Fan x 3 + CPU Fan Duct x 1
Power Supply
250W Single Power Supply with PFC
90V ~ 264V AC input
EMC & Safety
EMC:
FCC, CE Class B
Acoustic
Full-Loading: under 45dB (measure point: 100cm away from IO)
Environmental Temperature
Operating temperature: 5
o
C ~ 35
o
C
Non-operating temperature: -40
o
C ~ 70
o
C
Accessories
1-to-1 PCI-E 8X Riser Card x 1
Al CPU Heatsink x 2
Power Cord x 1
Extending Mounting Plate
Cable Kit:
Trophy NR18 Transport GX18
40-pin IDE Cable x 1 (for IDE HDD);
SATA Cable x 1
40-pin IDE Cable x 1 (for CD-ROM);
SATA Cable x 2
B4P to SATA PWR adapter cable B4P to SATA PWR x 2 + S4P x 1 adapter
cable
6. Brief Specifications 7. System Overview
Chassis Internal View
System Front View
System Rear View
CD-ROM
Power Switch VGA
USB x 2
Power Button
LED Definition
LED Color State Description
Front Panel
Power Green
OFF
ON
OFF
Power ON
Power OFF
Alarm Red
OFF
ON
OFF
Fault Detect
Normal Status
HDD Activity Yellow
OFF
Blinking
OFF
HDD Access Activity
No Disk Activity
Fiber LAN Activity Yellow
OFF
Blinking
OFF
LAN Access Activity
No LAN Access
Fiber LAN Link Red
OFF
ON
OFF
Fiber LAN Link
Fiber LAN Disconnected
Power Supply Socket
Memory Slots
System Fans
PCI-E 8X
slot
CPU Sockets
EPS 12V
Power Supply
2.5” HDD +
Slim CD-ROM
Bay
PCI-E 8X
Card Holder
Front Panel
LED Board
LAN + USB x 2
PS/2
KB & MS
COM
LAN x 2
PCI-E Slot
  • Page 1 1
  • Page 2 2

Tyan Transport GX18 Quick Installation Manual

Tyan
Brand
Tyan
Model
Transport GX18
Category
Motherboards
Type
Quick Installation Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents