Atdec SD-AT-DK-B-TAA Datasheet

Atdec
Brand
Atdec
Model
SD-AT-DK-B-TAA
Category
Flat panel desk mounts
Type
Datasheet

Atdec SD-AT-DK-B-TAA

The Atdec SD-AT-DK-B-TAA is an articulated arm designed for mounting LCD displays. It offers a wide range of motion, making it easy to position your display for optimal viewing. The arm can be desk clamped or bolted through, making it suitable for a variety of desk thicknesses. It also features cable management to keep your workspace tidy.

Key Features:

• Compatible with most LCD displays that use the VESA international mounting standard • Display weight compatibility: 3kg to 9kg (6.6lbs to 19.8lbs) • Desk mounting options: Desk clamp (for desktop thicknesses of 12mm to 38mm) or bolt through (for desktop thicknesses of 12mm to 40mm)

Atdec SD-AT-DK-B-TAA

The Atdec SD-AT-DK-B-TAA is an articulated arm designed for mounting LCD displays. It offers a wide range of motion, making it easy to position your display for optimal viewing. The arm can be desk clamped or bolted through, making it suitable for a variety of desk thicknesses. It also features cable management to keep your workspace tidy.

Key Features:

• Compatible with most LCD displays that use the VESA international mounting standard • Display weight compatibility: 3kg to 9kg (6.6lbs to 19.8lbs) • Desk mounting options: Desk clamp (for desktop thicknesses of 12mm to 38mm) or bolt through (for desktop thicknesses of 12mm to 40mm)

A
General Features
A
Technical Specifications
SPACEDEC ACROBAT
ARTICULATED ARM
As LCD Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the mounting hole pattern does not comply with
the international VESA standards. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice.
Published: 11.04.11
Display Compatibility:
Spacedec Acrobat is compatible with most LCD displays that use the VESA international mounting standard.
Please refer to the VESA Compliance List on the Atdec website to view all compatible LCD models (atdec.com)
Display Weight Compatibility:
3kg to 9kg (6.6lbs to 19.8lbs)
Desk Mounting Options:
Bolt Through (included in package) - Suits desktop thicknesses of 12mm to 40mm (0.5” to 1.5”)
Desk Clamp (included in package) - Suits desktop thicknesses of 12mm to 38mm (0.5” to 1.5”)
Display Mounting Options:
Suits 75mm x 75mm and 100mm x 100mm mounting hole patterns
Cable Management:
Cable Clips and Cable Wrap (included in package)
Colours:
Polished Aluminum, Silver or Black.
Warranty:
5 years limited
5
4
3
2
Arm swings 180° around mounting post
360° rotation
Up to 460mm (18”) height adjustment
Pivot head pans 85°
±40° tilt, ±40° pan
Portrait/Landscape rotation
1
2
3
4
6
1
5
6
Cable Management
F
All Spacedec Acrobat Articulated Arms are supplied with 1000mm (40”) of Ø16mm (0.63”) black Cable Wrap.
Desk Mounting Options
D
Desk Clamp Bolt Through
Desk
68mm(2.68”)
8mm
(0.32”)
39mm
(1.5”)
75mm
(3”)
66mm
(2.60”)
16mm
(0.63”)
Suits desk thicknesses of
12mm to 38mm (0.5” to 1.5”)
NOTE: Desk Clamp requires min. 66mm (
2.60”) of desk overhang
Suits desk thicknesses of 12mm to 40mm (0.5” to 1.5”)
NOTE: The following information is based on a Spacedec Acrobat Articulated Arm with the
standard 350mm arm set at the 6kg gas strut setting.
For technical information regarding Spacedec Acrobat’s optional extras please refer to
“Technical Specifications - Spacedec Acrobat Optional Extras” at atdec.com
38mm
(1.5”)
75mm x 75mm mounting hole pattern 100mm x 100mm mounting hole pattern
4x10mm
Screws
75mm
75mm
4x12mm or
4x16mm Screws
100mm
Display Mounting Options
E
Suits 75mm x 75mm and 100mm x 100mm mounting hole patterns.
Display
Display
Cable Clips
Cable Wrap
100mm
Overall Dimensions
B
Range of Movement
C
Side View
610 mm (24” )
260mm (10.25”)
635mm (25”)
265mm
(10.43”)
185mm
(7.28”)
238mm
(9.37”)
540mm
(21.25”)
80mm
(3.15”)
30°
80°
Height
Range
460mm
(18”)
arm at minimum elevation
arm parallel with desk
arm at maximum elevation
  • Page 1 1
  • Page 2 2

Atdec SD-AT-DK-B-TAA Datasheet

Atdec
Brand
Atdec
Model
SD-AT-DK-B-TAA
Category
Flat panel desk mounts
Type
Datasheet

Atdec SD-AT-DK-B-TAA

The Atdec SD-AT-DK-B-TAA is an articulated arm designed for mounting LCD displays. It offers a wide range of motion, making it easy to position your display for optimal viewing. The arm can be desk clamped or bolted through, making it suitable for a variety of desk thicknesses. It also features cable management to keep your workspace tidy.

Key Features:

• Compatible with most LCD displays that use the VESA international mounting standard • Display weight compatibility: 3kg to 9kg (6.6lbs to 19.8lbs) • Desk mounting options: Desk clamp (for desktop thicknesses of 12mm to 38mm) or bolt through (for desktop thicknesses of 12mm to 40mm)

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents