Atdec Freestanding Double Horizontal Display Stand VFSDH User manual

Category
Flat panel desk mounts
Type
User manual
General Features
VFS-DH
Overall Dimensions
Technical Specifications
Freestanding l Double Horizontal
Display Compatibility:
Visidec Freestanding Double Horizontal is compatible with Flat Panel Displays
measuring up to 635mm (25”) wide, with either 75mm x 75mm or
100mm x 100mm VESA mounting hole patterns.
Display Weight Compatibility:
Each Quickshift Donut supports a maximum weight of 12kg (26.5lbs)
Cable Management:
Cable Slot, Cable Clips and Cable Balls (included in package)
Colour Options:
- Pole available in Matt Silver Anodised only.
- Quickshift Donut available in Black only.
- Base available in Black/Silver only.
Warranty:
10 years limited
Vertical height adjustment
Horizontal adjustment
360°Portrait/Landscape adjustment
±20° Pan/Tilt adjustment
1
3
2
4
305mm
(12”)
302mm
(12”)
422mm
(16.61”)
222mm
(8.75”)
75mm
100mm
75mm
100mm
Choose the correct Mounting
Screws supplied in the
Hardware box and attach the
display as shown.
C
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 02.02.12
Base Dimensions
VESA Display Mounting Options
3
4
2
1
475mm
(18.70”)
682mm (27”)
Max Height
449mm (17.68”)
42mm
(1.65”)
42mm
(1.65”)
422mm
(16.61”)
89mm
(3.5”)
305mm
12”
Note: This product supports a
maximum width (from edge to edge)
of up to 635mm (25”) per display.
  • Page 1 1

Atdec Freestanding Double Horizontal Display Stand VFSDH User manual

Category
Flat panel desk mounts
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI