1 5/8"
41.2
DOOR
EDGE
DRILL (2) 1/2"[12.7] DIAMETER HOLES THRU THE FACE OF THE DOOR. (FOR WOOD
1.
DOOR, DRILL HALF WAY THRU BOTH SIDES OF THE DOOR TO AVOID SPLINTERING.)
INSERT ONE MOUNTING PLATE THROUGH ONE ROSE LINER SO THEY SIT FLUSH.
2.
TIGHTEN THE ROSE LINER AND MOUNTING PLATE TOGETHER USING (2) 1/2"[12.7]
3.
LONG MACHINE SCREWS AND (2) THREADED COUPLERS. SEE FIGURE 1.
INSERT SECOND MOUNTING PLATE THROUGH SECOND ROSE LINER SO THEY SIT
4.
FLUSH.
INSERT ASSEMBLY WITH THE THREADED COUPLERS INTO THE HOLES IN THE DOOR.
5.
HOLDING THE THREADED COUPLER ASSEMBLY TIGHT AGAINST THE DOOR, PLACE
6.
THE SECOND ASSEMBLY UP AGAINST THE INSIDE FACE OF DOOR. INSERT (2)
MACHINE SCREWS THRU THE HOLES IN ROSE LINER.
TIGHTEN ASSEMBLY TO THE DOOR USING (2) MACHINE SCREWS (MACHINE SCREWS
7.
SHOULD TIGHTEN TO THE THREADED COUPLERS INSIDE THE DRILLED HOLES IN THE
DOOR). SEE NOTE FOR SCREW DETAILS.
MAKE SURE BOTH SIDES ARE COMPLETELY TIGHTENED DOWN AND THEN INSTALL
8.
BOTH ROSES OVER THEIR ROSE LINERS.
INSERT BOTH LEVERS UNTIL THEY SNAP SECURELY IN PLACE.
9.
MOUNTING
PLATE
ROSE LINER
ROSE
LEVER
THREADED
COUPLER
SEE NOTE:
MOUNTING
PLATE
ROSE LINER
ROSE
LEVER
OUTSIDE
FACE
FIGURE 1:
WHEN TIGHTENED DOWN,
COUPLER WILL TIGHTEN TO THE
ROSE LINER. COUPLER MUST
SIT IN THE HOLE OF THE
MOUNTING PLATE SO THAT IT
CANNOT TWIST.
DIMENSIONS IN [ ] ARE IN MILLIMETERS
NOTE:
FOR 1-3/8"[34.9] THICK DOOR, USE 1"[25.4] LONG MACHINE SCREWS.
FOR 1-3/4"[44.5] THICK DOOR, USE 1-3/8"[34.9] LONG MACHINE SCREWS.
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 - (800) 325-9995 - Fax (800) 782-0149
2527 DUMMY INSTRUCTIONS
BACK TO BACK MOUNTING
SHEET 3 OF 3
DRAWING NO: I-LS00890
REV: 02
-
1
Hagerco 2500 Series Lever - Grade 2 Cylindrical Lever Mounting instructions
- Type
- Mounting instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Hager AE-2580US26D Installation guide
-
LIF Industries, Inc LLENT26 Installation guide
-
Global Door Controls GAL-1140P-626 Installation guide
-
Assa Abloy Sargent BHL 8200 Series Installation Instructions Manual
-
-
-
-
-
Tell Manufacturing LC2476CTL 26D 234 T Installation guide
-
