Bull novascale BL265 Installation guide

novascale Blade

BL265

Installation and User's Guide

novascale Blade

REFERENCE

86 A1 44FB 01

novascale Blade

novascale Blade BL265

Installation and User's Guide

Hardware

April 2010

BULL CEDOC

357 AVENUE PATTON

B.P.20845

49008 ANGERS CEDEX 01

FRANCE

REFERENCE

86 A1 44FB 01

The following copyright notice protects this book under Copyright laws which prohibit such actions as, but not limited

to, copying, distributing, modifying, and making derivative works.

Copyright

Bull SAS 2009-2010

Printed in France

Suggestions and criticisms concerning the form, content, and presentation of this book are

invited. A form is provided at the end of this book for this purpose.

To order additional copies of this book or other Bull Technical Publications, you are invited

to use the Ordering Form also provided at the end of this book.

Trademarks and Acknowledgements

We acknowledge the rights of the proprietors of the trademarks mentioned in this manual.

All brand names and software and hardware product names are subject to trademark and/or patent protection.

Quoting of brand and product names is for information purposes only and does not represent trademark misuse.

The information in this document is subject to change without notice. Bull will not be liable for errors contained

herein, or for incidental or consequential damages in connection with the use of this material.

Contents

iii

Table of Contents

List of Figures.......................................................................................................... vi

List of Tables ...........................................................................................................vii

Safety ................................................................................................................... ix

Safety statements.............................................................................................................................x

Chapter 1. Introduction .......................................................................................1

1.1 Related documentation........................................................................................................ 2

1.2 Notices and statements in this document ............................................................................... 3

1.3 Features and specifications.................................................................................................. 4

1.4 What your blade server offers ............................................................................................. 6

1.5 Reliability, availability, and serviceability features.................................................................. 8

1.6 Major components of the blade server.................................................................................. 9

Chapter 2. Power, controls and indicators ............................................................ 11

2.1 Blade server controls and LEDs .......................................................................................... 11

2.2 Turning on the blade server ............................................................................................... 14

2.3 Turning off the blade server............................................................................................... 15

2.4 Blade server connectors .................................................................................................... 15

Chapter 3. Installing Options ............................................................................. 17

3.1 Installation guidelines ....................................................................................................... 17

3.1.1 System reliability guidelines ..................................................................................... 18

3.1.2 Handling static-sensitive devices ............................................................................... 18

3.2 Removing the blade server from the Blade Chassis............................................................... 19

3.3 Removing the blade server cover........................................................................................ 20

3.4 Installing an optional expansion unit................................................................................... 21

3.5 Removing an optional expansion unit ................................................................................. 23

3.6 Installing a hot-swap storage drive ..................................................................................... 24

3.7 Removing a hot-swap storage drive.................................................................................... 25

3.8 Installing a memory module............................................................................................... 26

3.9 Removing a memory module ............................................................................................. 31

3.10 Installing a microprocessor and heat sink............................................................................ 33

3.11 Thermal grease................................................................................................................ 37

iv novascale Blade BL265 - Installation and User's Guide

3.12 Installing a USB Flash Key .................................................................................................38

3.13 I/O-expansion cards.........................................................................................................39

3.13.1 Installing a horizontal-compact-form-factor expansion card...........................................39

3.13.2 Removing a horizontal-compact-form-factor expansion card .........................................41

3.13.3 Installing a CIOv-form-factor expansion card ..............................................................42

3.13.4 Removing a CIOv-form-factor expansion card.............................................................43

3.13.5 Installing a storage interface card .............................................................................45

3.13.6 Removing a storage interface card............................................................................49

3.14 Completing the installation ................................................................................................52

3.14.1 Closing the blade server cover..................................................................................53

3.14.2 Installing the blade server in a Blade Chassis .............................................................55

3.14.3 Updating the blade server configuration ....................................................................57

3.14.4 Input / output connectors and devices .......................................................................57

Chapter 4. Configuring the blade server ............................................................. 59

4.1 Using the Setup Utility .......................................................................................................59

4.1.1 Setup Utility menu ...................................................................................................60

4.1.2 Using passwords.....................................................................................................63

4.2 Installing the operating system............................................................................................63

4.3 Using the PXE boot agent utility program.............................................................................63

4.4 Firmware updates.............................................................................................................64

4.5 Configuring UEFI compatible devices..................................................................................64

4.6 Configuring the Gigabit Ethernet controllers.........................................................................65

4.7 Configuring a RAID array..................................................................................................65

4.8 Using the LSI Logic Configuration Utility program .................................................................66

4.9 Using LAN over USB to Interface the IMM ...........................................................................66

4.9.1 Potential conflicts with the LAN over USB interface......................................................67

4.9.2 Resolving conflicts with the IMM LAN over USB interface.............................................67

4.9.3 Configuring the LAN over USB interface manually ......................................................68

Chapter 5. Installing the operating system ............................................................71

Chapter 6. Solving problems..............................................................................73

6.1 Diagnostic tools overview..................................................................................................73

Appendix A. Getting help and technical assistance ......................................................75

Before you call.............................................................................................................................75

Using the documentation ...............................................................................................................75

Appendix B. Notices.............................................................................................. 77

Particulate contamination...............................................................................................................78

Product recycling and disposal.......................................................................................................79

Electronic emission notices.............................................................................................................80

Contents

v

Industry Canada Class A emission compliance statement.................................................................. 80

Australia and New Zealand Class A statement ................................................................................ 80

United Kingdom telecommunications safety requirement ................................................................... 80

European Union EMC Directive conformance statement .................................................................... 81

Taiwanese Class A warning statement............................................................................................ 81

Chinese Class A warning statement................................................................................................ 81

Japanese Voluntary Control Council for Interference (VCCI) statement ................................................ 81

vi novascale Blade BL265 - Installation and User's Guide

List of Figures

Figure 1-1. Blade server..................................................................................................................2

Figure 1-2. Major blade server components ......................................................................................9

Figure 2-1. Blade server controls and LEDs ......................................................................................11

Figure 2-2. Information LEDs on the SAS hot-swap hard disk drive .....................................................13

Figure 2-3. Blade server connectors................................................................................................15

Figure 3-1. Removing the blade server from the Blade Chassis...........................................................19

Figure 3-2. Opening the blade server cover ....................................................................................20

Figure 3-3. Installing an expansion unit...........................................................................................21

Figure 3-4. Removing an expansion unit .........................................................................................23

Figure 3-5. Installing a hot-swap storage drive.................................................................................24

Figure 3-6. Removing a hot-swap storage drive................................................................................25

Figure 3-7. DIMM access door.......................................................................................................29

Figure 3-8. Installing a DIMM ........................................................................................................29

Figure 3-9. Removing a DIMM.......................................................................................................31

Figure 3-10. DIMM access door.......................................................................................................32

Figure 3-11. Installing the microprocessor .........................................................................................33

Figure 3-12. Installing thermal grease...............................................................................................37

Figure 3-13. Installing a CFFh expansion card...................................................................................39

Figure 3-14. Removing a CFFh expansion card..................................................................................41

Figure 3-15. Installing a CIOv form-factor expansion card...................................................................42

Figure 3-16. Removing a CIOv form-factor expansion card .................................................................43

Figure 3-17. CIOv form-factor expansion card retaining clips..............................................................44

Figure 3-18. Installing a storage interface card..................................................................................45

Figure 3-19. Storage interface card interposer...................................................................................46

Figure 3-20. Inserting the cable into the cable connector on the storage interface card...........................47

Figure 3-21. Installing the backup-battery cable to the backup battery ..................................................48

Figure 3-22. Backup-battery cable orientation....................................................................................48

Figure 3-23. Removing a storage interface card.................................................................................49

Figure 3-24. Storage interface card location......................................................................................50

Figure 3-25. Removing the backup battery ........................................................................................51

Figure 3-26. Closing the blade server cover ......................................................................................53

Figure 3-27. Closing the DIMM access door......................................................................................54

Figure 3-28. Installing the blade server in a Blade Chassis..................................................................55

Contents

vii

List of Tables

Table 1-1. Blade server features and specifications ........................................................................... 5

Table 3-1. Memory channel configuration...................................................................................... 26

Table 3-2. System memory configuration for independent channel mode (1 microprocessor)................ 27

Table 3-3. System memory configuration for independent channel mode (2 microprocessors) .............. 27

Table 3-4. System memory configuration for mirrored channel mode (1 microprocessor) ..................... 27

Table 3-5. System memory configuration for mirrored channel mode (2 microprocessors).................... 28

Table B-1. Limits for particulates and gases .................................................................................... 78

viii novascale Blade BL265 - Installation and User's Guide

Safety

ix

Safety

x novascale Blade BL265 - Installation and User's Guide

Safety statements

Safety

xi

xii novascale Blade BL265 - Installation and User's Guide

Safety

xiii

xiv novascale Blade BL265 - Installation and User's Guide

Chapter 1. Introduction

1

Chapter 1. Introduction

The Bull novascale Blade BL265 server is compatible with any Blade Chassis. The

novascale Blade BL265 blade server supports up to two multi-core Intel

® Xeon®

microprocessors and has twelve memory-module slots, two hot-swappable storage-device

bays, one Horizontal-compact-form-factor (CFFh) expansion card connector, one Vertical-

combination-I/O (CIOv) connector, and one internal USB connector.

Note "Blade Chassis" is a generic term used to indicate both the Bull Blade Chassis-Standard

and/or the Bull Blade Chassis-Enterprise.

This Installation and User’s Guide provides information about:

• Setting up the blade server

• Starting and configuring the blade server

• Installing hardware options

• Installing the operating system

• Performing basic troubleshooting of the blade server

The blade server comes with a limited warranty. For information about the terms of the

warranty and getting service and assistance, see the Bull Hardware Product Warranty

document for your blade server on the Resource DVD. You can obtain up-to-date

information about the blade server at

http://www.bull.com/support.

If firmware and documentation updates are available, you can download them from

http://www.bull.com/support/. The blade server might have features that are not

described in the documentation that comes with the blade server, and the documentation

might be updated occasionally to include information about those features, or technical

updates might be available to provide additional information that is not included in the

blade server documentation.

Record information about the blade server in the following table.

Product name

Model number ____________________________________________________

Serial number ____________________________________________________

The model number and serial number are located on the ID label that is behind the control

panel door on the front of the blade server, and on a label on the side of the blade server

that is visible when the blade server is not in the Blade Chassis.

Note The illustrations in this document might differ slightly from the hardware.

2 novascale Blade BL265 - Installation and User's Guide

Figure 1-1. Blade server

A set of blank labels comes with the blade server. When you install the blade server in the

Blade Chassis, write identifying information on a label and place the label on the Blade

Chassis bezel. See the documentation for your Blade Chassis for recommended label

placement.

mportant

Do not place the label on the blade server itself or in any way block the ventilation holes

on the blade server.

1.1 Related documentation

This Installation and User’s Guide contains general information about the blade server,

including how to install supported optional devices and how to configure the blade server.

The following documentation also comes with the blade server:

Problem Determination and Service Guide

This document is in Portable Document Format (PDF) on the Resource DVD. It contains

information to help you solve problems yourself, and it contains information for service

technicians.

Chapter 1. Introduction

3

Safety Information

This document is in PDF on the Resource DVD. It contains translated caution and danger

statements. Each caution and danger statement that appears in the documentation has a

number that you can use to locate the corresponding statement in your language in the

Safety Attention document.

Bull Hardware Product Warranty

This document is in PDF on the Resource DVD. It contains information about the terms of the

warranty and getting service and assistance. Depending on your Blade product, additional

documents might be included on the Resource DVD.

In addition to the documentation in this library, be sure to review the Bull Blade Planning

and Installation Guide for your Blade Chassis for information to help you prepare for

system installation and configuration.

1.2 Notices and statements in this document

The caution and danger statements that appear in this document are also in the multilingual

Safety Attention document, which is on the Resource DVD. Each statement is numbered for

reference to the corresponding statement in the Safety Attention document.

The following types of notices and statements are used in this document:

Note These notices provide important tips, guidance, or advice.

mportant:

These notices provide information or advice that might help you avoid inconvenient or

problem situations.

Attention:

These notices indicate possible damage to programs, devices, or data. An attention notice

is placed just before the instruction or situation in which damage could occur.

CAUTION:

These statements indicate situations that can be potentially hazardous to you. A caution

statement is placed just before the description of a potentially hazardous procedure step or

situation.

DANGER:

These statements indicate situations that can be potentially lethal or extremely hazardous to

you. A danger statement is placed just before the description of a potentially lethal or

extremely hazardous procedure, step, or situation.

4 novascale Blade BL265 - Installation and User's Guide

1.3 Features and specifications

The following table provides a summary of the features and specifications of the blade

server.

Notes

• Power, cooling, removable-media drives, external ports, and advanced system

management are provided by the Blade Chassis.

• The operating system in the blade server must provide USB support for the blade server

to recognize and use the removable-media drives and front-panel USB ports. The Blade

Chassis uses USB for internal communications with these devices.

Blade server features and specifications

Microprocessor: Supports up to two multi-core Intel Xeon microprocessors.

Note: Use the Setup Utility to determine the type and speed of the microprocessors in your

blade server.

Memory:

• 12 dual inline memory module(DIMM) connectors.

• Type: Very Low Profile (VLP) double-data rate (DDR3) DRAM.

• Supports 1 GB, 2 GB, 4 GB, and 8 GB DIMMs with up to 96 GB of total memory on

the system board.

Drives: Supports up to two hot-swap, small form factor (SFF) Serial Attached SCSI (SAS) or

Serial ATA (SATA) storage drives.

Predictive Failure Analysis® (PFA) alerts:

• Microprocessor

• Memory

• Hard disk drive

Electrical input: 12 V dc

Integrated functions:

• Horizontal-compact-form-factor (CFFh) expansion card interface

• Vertical-combination-I/O (CIOv) expansion card interface

• Local service processor: Integrated Management Module (IMM) with Intelligent Platform

Management Interface (IPMI) firmware

• Integrated Matrox G200eV video controller

• LSI 1064E Serial Attached SCSI (SAS) controller

• Broadcom BCM5709S dual-port Gigabit Ethernet controller

• Integrated keyboard/video/mouse (cKVM) controller through IMM

• Light path diagnostics

• RS-485 interface for communication with the management module

• Automatic server restart (ASR)

• Serial over LAN (SOL)

• Redundant buses for communication with keyboard, mouse, and removable media

drives

• USB 2.0 for communication with the cKVM and removable media drives (an external

USB port is not supported)

Page is loading ...

Bull novascale BL265 Installation guide

Bull novascale BL265 Installation guide

Related papers

Other documents