vitapur VPS1140-1 User guide

WARNING!

Filters inside blue filter sumps are still wrapped in

plastic. Uninstall filter sumps, remove plastic from

filters and reinstall before hooking up to water source.

Figure 1: Reinstall filter sumps (with filters

inside). Make sure (white) PP filter is the first

stage of filtration from inlet, and carbon

(white mesh) is the second stage of filtration

from inlet. Tighten down with provided black

wrench.

Figure 1: Remove filter sumps (use

provided wrench if needed)

Figure 2: Remove both filters from sumps, and

remove plastic from filters.

Filter

Carbon

Filter

PP Filter

Carbon

Filter

Inlet