2-Port USB DVI KVM Switch
Quick Start Guide
GCS922U
PART NO. Q1268-a
www.iogear.com
Requirements
Package Contents
Console:
• 1 DVI display
• 1 set of USB keyboard and mouse
Computers
• 1 DVI-D Port
• 1 USB Port
Operating Systems
• Windows
®
2000, Windows
Vista
®
,
Windows
®
7, Windows
®
8, 8.1
• Mac OS 9 to 10.x
• Oracle
®
Solaris
• Linux
®
1 x GCS922U 2-Port USB DVI KVM Switch
1 x Quick Start Guide
1 x Warranty Card
Overview
1. Port LEDs
2. Console Ports
3. Mini USB Power Jack
4. Remote Port Selector
5. USB Keyboard and
Mouse Connectors
6. DVI Connectors
1 2
3
4
5
6
1
2
2-Port USB DVI KVM Switch
Quick Start Guide
GCS922U
PART NO. Q1268-a
www.iogear.com
Requirements
Package Contents
Console:
• 1 DVI display
• 1 set of USB keyboard and mouse
Computers
• 1 DVI-D Port
• 1 USB Port
Operating Systems
• Windows
®
2000, Windows
Vista
®
,
Windows
®
7, Windows
®
8, 8.1
• Mac OS 9 to 10.x
• Oracle
®
Solaris
• Linux
®
1 x GCS922U 2-Port USB DVI KVM Switch
1 x Quick Start Guide
1 x Warranty Card
Overview
1. Port LEDs
2. Console Ports
3. Mini USB Power Jack
4. Remote Port Selector
5. USB Keyboard and
Mouse Connectors
6. DVI Connectors
1 2
3
4
5
6
1
2
2-Port USB DVI KVM Switch
Quick Start Guide
GCS922U
PART NO. Q1268-a
www.iogear.com
Requirements
Package Contents
Console:
• 1 DVI display
• 1 set of USB keyboard and mouse
Computers
• 1 DVI-D Port
• 1 USB Port
Operating Systems
• Windows
®
2000, Windows
Vista
®
,
Windows
®
7, Windows
®
8, 8.1
• Mac OS 9 to 10.x
• Oracle
®
Solaris
• Linux
®
1 x GCS922U 2-Port USB DVI KVM Switch
1 x Quick Start Guide
1 x Warranty Card
Overview
1. Port LEDs
2. Console Ports
3. Mini USB Power Jack
4. Remote Port Selector
5. USB Keyboard and
Mouse Connectors
6. DVI Connectors
1 2
3
4
5
6
1
2
Hardware Installation
1. Plug your USB keyboard, USB mouse and DVI monitor into
their respective ports on the GCS922U.
Note: The USB mouse port can be used for USB peripheral
sharing. To do so, plug the peripherals and your mouse into
a USB hub, then plug the hub into the mouse port.
2. Plug the USB and DVI connectors of the attached KVM
cables into their respective ports on the computers you are
installing.
Note: If there is only one USB port on the computer, you
can connect a USB hub to the computer, and then plug the
Keyboard/Mouse cable into the USB hub.
3. (Optional) If the power supply to your attached USB
peripheral(s) is not sufficient, plug in the USB to Mini USB
cable* in the power jack to get power from another USB
power source (i.e. PC, USB hub, 5V USB power adapter).
*Note: The USB to mini USB cable is not included.
Contact
Limited Warranty
iogear.custhelp.com
support@iogear.com
www.iogear.com
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product
support
Warranty Information
This product carries a 3 Year Limited Warranty. For the
terms and conditions of this warranty, please go to
http://www.iogear.com/support/warranty
Register online at http://www.iogear.com/register
Important Product Information
Product Model
Serial Number
43
Operation
CE Compliance
This device has been tested and found to comply with the
following European Union directives: Electromagnetic
Capability (2004/108/EC), Low Voltage (2006/95/EC) and
R&TTED (1999/5/EC).
1.
Power on your computers one at a time, letting each one boot
completely, once you finish connecting them to the KVM switch.
2. Press the remote button to switch between the two computers.
FCC Statement
This product has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This product generates,
uses, and can radiate radio frequency energy. If this product is
not installed and used as directed it may cause harmful
interference to radio communications. Operating this product in
a residential area will likely cause harmful interference which
will require correction by the user at his/her personal expense.
1
3
2
2
1
Hardware Installation
1. Plug your USB keyboard, USB mouse and DVI monitor into
their respective ports on the GCS922U.
Note: The USB mouse port can be used for USB peripheral
sharing. To do so, plug the peripherals and your mouse into
a USB hub, then plug the hub into the mouse port.
2. Plug the USB and DVI connectors of the attached KVM
cables into their respective ports on the computers you are
installing.
Note: If there is only one USB port on the computer, you
can connect a USB hub to the computer, and then plug the
Keyboard/Mouse cable into the USB hub.
3. (Optional) If the power supply to your attached USB
peripheral(s) is not sufficient, plug in the USB to Mini USB
cable* in the power jack to get power from another USB
power source (i.e. PC, USB hub, 5V USB power adapter).
*Note: The USB to mini USB cable is not included.
Contact
Limited Warranty
iogear.custhelp.com
support@iogear.com
www.iogear.com
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product
support
Warranty Information
This product carries a 3 Year Limited Warranty. For the
terms and conditions of this warranty, please go to
http://www.iogear.com/support/warranty
Register online at http://www.iogear.com/register
Important Product Information
Product Model
Serial Number
43
Operation
CE Compliance
This device has been tested and found to comply with the
following European Union directives: Electromagnetic
Capability (2004/108/EC), Low Voltage (2006/95/EC) and
R&TTED (1999/5/EC).
1.
Power on your computers one at a time, letting each one boot
completely, once you finish connecting them to the KVM switch.
2. Press the remote button to switch between the two computers.
FCC Statement
This product has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This product generates,
uses, and can radiate radio frequency energy. If this product is
not installed and used as directed it may cause harmful
interference to radio communications. Operating this product in
a residential area will likely cause harmful interference which
will require correction by the user at his/her personal expense.
1
3
2
2
1
Hardware Installation
1. Plug your USB keyboard, USB mouse and DVI monitor into
their respective ports on the GCS922U.
Note: The USB mouse port can be used for USB peripheral
sharing. To do so, plug the peripherals and your mouse into
a USB hub, then plug the hub into the mouse port.
2. Plug the USB and DVI connectors of the attached KVM
cables into their respective ports on the computers you are
installing.
Note: If there is only one USB port on the computer, you
can connect a USB hub to the computer, and then plug the
Keyboard/Mouse cable into the USB hub.
3. (Optional) If the power supply to your attached USB
peripheral(s) is not sufficient, plug in the USB to Mini USB
cable* in the power jack to get power from another USB
power source (i.e. PC, USB hub, 5V USB power adapter).
*Note: The USB to mini USB cable is not included.
Contact
Limited Warranty
iogear.custhelp.com
support@iogear.com
www.iogear.com
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product
support
Warranty Information
This product carries a 3 Year Limited Warranty. For the
terms and conditions of this warranty, please go to
http://www.iogear.com/support/warranty
Register online at http://www.iogear.com/register
Important Product Information
Product Model
Serial Number
43
Operation
CE Compliance
This device has been tested and found to comply with the
following European Union directives: Electromagnetic
Capability (2004/108/EC), Low Voltage (2006/95/EC) and
R&TTED (1999/5/EC).
1.
Power on your computers one at a time, letting each one boot
completely, once you finish connecting them to the KVM switch.
2. Press the remote button to switch between the two computers.
FCC Statement
This product has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This product generates,
uses, and can radiate radio frequency energy. If this product is
not installed and used as directed it may cause harmful
interference to radio communications. Operating this product in
a residential area will likely cause harmful interference which
will require correction by the user at his/her personal expense.
1
3
2
2
1
/