Quick User Guide
Gaming Case
Table of Contents
Thank you for purchasing a Rosewill Computer Case
Please read the instruction manual before using and
retain it for your future reference.
1
• Product Overview
Disassembly ...................................................... 02
Accessory Box ................................................... 03
• Installation Guide
1. Open the Unit ................................................ 04
2. Install the Power Supply ................................ 05
3. Install Motherboard ........................................ 06
4. Install Add-on Card ........................................ 07
5. Install 3.5”/2.5” HDD/SDD ............................. 08
6. Care ............................................................... 09
7. Options .......................................................... 10
• Specications Table ........................................... 12
Front I/O Cable Pinout ....................................... 13
Front I/O ............................................................. 13
2
Quick User GuidePRISM S500
Gaming Case
Product Overview
Disassembly (components vary by country)
Cooling Fan
HDD Cage
SSD
Plates
Side Panel
Cooling FanDust Filter
Front View Right Side View Rear View Left Side View
210 mm
477 mm
475 mm
SSD/HDD
Plate
Glass Panel
3
Quick User GuidePRISM S500
Gaming Case
Accessory Box
Image Part Name Qty Function/Component
Screw-A (6-32 x 6mm) 5 PSU
Screw-B (6-32 x 5mm) 22
Motherboard
3.5” HDD
Screw-C (M3 x 5mm) 20 2.5” SSD
Standoff 9
Motherboard
(Pre-Installed)
Nut Setter 1
Standoff Installation
(Optional: Standoffs are
Pre-Installed)
Cable Tie 10 Cable Management
Velcro Strap 4 Cable Management
Micro Fiber Towel 1 Tempered Glass Cleaning
4
Quick User GuidePRISM S500
Gaming Case
Installation Guide
1. Open the Unit
1-1. Loosen the thumbscrews and take off panel R and L (Figure 1).
1
•
Simply loosen screws to
remove side panel
5
Quick User GuidePRISM S500
Gaming Case
2
2. Install the Power Supply
2-1. Set the power supply unit (PSU) at the top of the case and secure with Screw-A (Figure 2).
6
Quick User GuidePRISM S500
Gaming Case
3. Install Motherboard
3-1. Secure the motherboard down onto the pre-installed standoff with Screw-B (Figure 3).
3
7
Quick User GuidePRISM S500
Gaming Case
4. Install Add-on Card
4-1. Loosen the screws to open the cover panel/slot cover (Figure 4a).
4-2. Install the add-on card and secure with screws (Figure 4b).
4a
4b
8
Quick User GuidePRISM S500
Gaming Case
5a
5d
5f 5g 5h
5e
5c
5-2. Secure the 3.5" drive onto the tray/plate with Screw-B (Figure 5d/5e).
5-3. Secure the 2.5” drive onto the tray with Screw-C (Figure 5f/5g/5h).
* If drive is installed on 5e or 5g, water cooling radiator cannot be added.
5-4. Put the tray/plate back onto the chassis and secure with screws.
5. Install 3.5”/2.5” HDD/SDD
5-1. Take out the 3.5”/2.5” HDD/SDD trays/plates from the chassis (Figure 5a/5b/5c).
5b
9
Quick User GuidePRISM S500
Gaming Case
6a
6-2. Clean the dust lters on the bottom regularly to ensure adequate airow (Figure 6b).
6. Care
To prevent damage, keep all panels closed and secured.
6-1. Put the side panels back in place and secure with thumbscrews (Figure 6a).
6b
10
Quick User GuidePRISM S500
Gaming Case
7. Options
7-1. LED Light Mode
Press LED light button briefly:
RGB 1 (steady-rainbow) > RGB 2 (owing-rainbow) > RGB 3 > RGB 4 > RGB 5 (seven-
color-breath) > RGB 6 (seven-color-one-way-billboard) > (seven-color-two-way-billboard) >
Red > Green > Blue > White > Yellow > Cyan > Pink
Press LED light button and hold for >1.5 seconds:
LED light turns off.
7-2. Liquid Cooling Radiator Installation
Installing water cooling radiator on the side:
a. Unscrew to remove the drives plate (Figure 7a).
b. Secure the radiator with screws (Figure 7b).
7a
7b
11
Quick User GuidePRISM S500
Gaming Case
d. Secure the radiator with screws and put the dust lter back (Figure 7d).
Installing water cooling radiator on the bottom:
c. Remove the bottom dust lter (Figure 7c).
7c
7d
12
Quick User GuidePRISM S500
Gaming Case
Specifications Table
Model
Model Name PRISM S500
Specifications
Type ATX Mid Tower
Color Black
Case Material Steel / Tempered Glass
With Power Supply No
Power Supply Mounted Top
Motherboard Compatibility E-ATX, ATX, Micro ATX
With Side Panel Window Yes / Tempered Glass Side Panel
Expansion
External 5.25" Drive Bays 0
Internal 3.5" Drive Bays 3 (0)
Internal 2.5" Drive Bays 2 (5)
Expansion Slots 7
Front Ports
Front Ports
2 x USB 3.0
HD Audio In/Out
LED Light Control
Cooling System
120 mm Fans
3 x Bottom RGB LED (Pre-Installed)
2 x Side (Optional)
1 x Rear RGB LED (Pre-Installed)
Physical Specifications
Dimensions 8.27” x 18.7” x 18.5” (W x H x D)
Weight 17.6 lbs
13
Quick User GuidePRISM S500
Gaming Case
Front I/O Cable Pinout
Front I/O
USB 3.0 CONNECTOR HD Audio CONNECTOR
Mic.
HD Audio
USB 3.0
LED Switch
Power
Features
• Tempered Glass Side Panel
• Pre-Installed 4 x 120mm RGB LED Fans
• I/O Ports: 2 x USB 3.0, HD Audio In/Out, LED Light Control
• Supports up to 2 x 120mm Fans / 240mm Water-Cooling Radiator on the side, 3 x 120mm Fans
/ 360mm Water-Cooler on the bottom, 1 x 120mm Fan at the rear
• Supports up to 160mm tall CPU Cooler
• Supports up to 440mm Graphics Card
• Easy-Access Bottom Dust Filter
NOTICE: Please make sure your motherboard is equipped with on-board USB 3.0 socket before
purchasing
PRISM S500_A
Technical Support Information
[email protected] 1-800-575-9885
----------------------------------------------------------------------------------
Thank you for purchasing a quality Rosewill product.
Please register your product at www.rosewill.com
for complete warranty information and support for your product.
/