Neu Master Electric Brad Nailer User guide

Jam clear instruction

No-marring tip

Wrench

Pull out the No-marring Tip, Loose the

two bolts with the wrench on tool.

Take off the outer panel, contact safety

pole and the middle panel , keep these

parts for reassembly.

Remove the jammed brad nail, place back

the middle panel, contacted safety pole.

Middle panel

Contact

safety

pole

Place back the outer panel, two spring

washers and bolts and tighten the bolts by

hand first.

Spring washer

Two bolts

outer panel

Tighten the two bolts with wrench,

assembly the No-marring tip.

Check there is no gap between

middle panel and magazine, the

gap will cause to double brad nail.

This manual is also suitable for

Download PDF