Raychem RTD3CS and RTD10CS are three-wire platinum RTD (resistance temperature detectors) typically used with monitoring and control systems, such as the nVent RAYCHEM 910 controller, when accurate temperature control is required.
These devices can be installed directly to the controller using the supplied 1/2 inch conduit fitting or to an RTDjunction box where RTD extension wire is used.
The RTD3CS and RTD10CS have a sensing area of 11/2 in (38 mm) within a 3 in (76 mm) length and 3/16 in (8 mm) diameter 316 stainless steel housing, and an accuracy of ±1°F (0.
Raychem RTD3CS and RTD10CS are three-wire platinum RTD (resistance temperature detectors) typically used with monitoring and control systems, such as the nVent RAYCHEM 910 controller, when accurate temperature control is required.
These devices can be installed directly to the controller using the supplied 1/2 inch conduit fitting or to an RTDjunction box where RTD extension wire is used.
The RTD3CS and RTD10CS have a sensing area of 11/2 in (38 mm) within a 3 in (76 mm) length and 3/16 in (8 mm) diameter 316 stainless steel housing, and an accuracy of ±1°F (0.
Raychem RTD3CS and RTD10CS are three-wire platinum RTD (resistance temperature detectors) typically used with monitoring and control systems, such as the nVent RAYCHEM 910 controller, when accurate temperature control is required.
These devices can be installed directly to the controller using the supplied 1/2 inch conduit fitting or to an RTDjunction box where RTD extension wire is used.
The RTD3CS and RTD10CS have a sensing area of 11/2 in (38 mm) within a 3 in (76 mm) length and 3/16 in (8 mm) diameter 316 stainless steel housing, and an accuracy of ±1°F (0.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI