ZyXEL PMG1005-T20B Quick start guide

ZyXEL
Brand
ZyXEL
Model
PMG1005-T20B
Category
Network media converters
Type
Quick start guide
1/2 Copyright © 2017 Zyxel Communications Corp. All Rights Reserved
2
3
2
3
1
LAN
POWER
4
PON
Connect the power cable and press
the power button.
Make sure the LEDs are on and
check the status.
Connect a computer using an
Ethernet cable.
Connect the fiber optic cable to
the PON port.
Warning! To avoid possible eye
injury, do NOT look into an
operating fiber-optic module's
connector.
Quick Start Guide
1
INTERNET
Red
Green
Green
Off
Off
Off
Off
(Loss of Signal)
On: Power on and system ready
Off: Power off
On: Successful GPON fiber link
Blinking: Synching with OLT (fiber terminal)
Off: Power off
On: Not receiving an optical signal
Blinking: Receiving a weak optical signal
Off: Receiving a normal optical signal
Blinking: Transmitting/Receiving data on the
Ethernet link
Green
On: Successful Ethernet link
Off: Ethernet link down
PMG1005-T20B
GPON SFU with 1-port GbE LAN
Hardware Connections
POWER
PON
LOS
LAN
2/2 Copyright © 2017 Zyxel Communications Corp. All Rights Reserved
EU Importer: Zyxel Communications A/S | Generatorvej 8D, 2860 Søborg, Denmark | http://www.zyxel.dk
US Importer: Zyxel Communications, Inc | 1130 North Miller Street Anaheim, CA 92806-2001 | http://www.us.zyxel.com
See the User's Guide at www.zyxel.com for more information, including customer support and safety warnings.
None of the LEDs turn on
- Make sure that you have the correct power cord connected and plugged into an appropriate power
source.
The PON LED is blinking
- The fiber link is synchronizing. Please wait.
The PON LED is off
- The fiber link is down. Restart the Device.
The LOS LED is blinking
- The Device is receiving a weak optical signal. Reposition the Device.
The LOS LED is red
- The Device is not receiving an optical signal. Reconnect the fiber optic cable to the PON port.
The LAN LED is off
- The Ethernet connection is down. Reconnect the Ethernet cable to the LAN port.
If problems persist, please contact your vendor or customer support.
54 mm
Troubleshooting
Wall Mounting
GPON SN: XXXXXXXXXXXXXXX X
Serial Number: SYY41 W W XXXXX X
M AC A ddress: XXXXXXXXXXX X
Model Number: PMG1005-T20B
Power Consumption: 2.638Watt max.
Power Rating: 12V 0.5A
  • Page 1 1
  • Page 2 2

ZyXEL PMG1005-T20B Quick start guide

ZyXEL
Brand
ZyXEL
Model
PMG1005-T20B
Category
Network media converters
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents