George Kovacs P5220-647 User manual

Brand
George Kovacs
Model
P5220-647
Type
User manual

This manual is also suitable for

George Kovacs P5220-647 is an adjustable light fixture. It can be mounted on a ceiling or wall, making it suitable for various applications such as kitchens, bedrooms, and living rooms. It has a simple yet stylish design that will complement any décor. The fixture requires minimal assembly and comes with all the necessary mounting hardware. The installation instructions are clear and easy to follow, allowing for a quick and hassle-free installation.

George Kovacs P5220-647 is an adjustable light fixture. It can be mounted on a ceiling or wall, making it suitable for various applications such as kitchens, bedrooms, and living rooms. It has a simple yet stylish design that will complement any décor. The fixture requires minimal assembly and comes with all the necessary mounting hardware. The installation instructions are clear and easy to follow, allowing for a quick and hassle-free installation.

INSTALLATION INSTRUCTIONS
Item#P5220-613/647 (New. 03/01/2012)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
Fig. 2
MOUNTING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker and remove
the old fixture, including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts on a clear area. Take care not to lose any
small parts necessary for installation.
3. Attach the crossbar to the junction box with the
mounting screws (size: #8-32N*L0.5”). The side of
the crossbar marked “GND” must face out.
4. Thread the nipple part way into the center hole of
the crossbar. Note: The length of the nipple into the
crossbar may by adjusted if necessary.
CONNECTING THE WIRES (Fig. 2)
5. At this point, connect the electrical wires as shown
in Fig. 2, making sure that all wire connectors are
secured. If your outlet box has a ground wire (green
or bare copper), connect the fixture’s ground wire to
it. Otherwise, connect the fixture’s ground wire
directly to the mounting plate using the green screw
provided. After wires are connected, tuck them
carefully inside the junction box.
FINISHING THE INSTALLATION (Fig.1)
6. Place the fixture body (D) over the nipple and secure
with cap nut (C).
7. Secure glass shade (B) and metal frame (E) to the
fixture body (D) with screws (A) as shown Fig.1.
8. Install the light bulb(s) (not included) in accordance
with fixtures specifications (DO NOT EXCEED
MAXIMUM WATTAGE RATING!) (NE PAS
DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
Your installation is now complete. Return power to
the junction box and test the fixture.
Note: Illustration (Fig.1) on this manual is for
installation purposes only. It may or may not
be identical to the fixture purchased.
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green or
Bare
Copper(Gr
ound)
MIN 90℃ SUPPLY CONDUCTORS
LA-2102E
Set# A-016
- Crossbar
-Ground screw
-Mounting Screw*2
B
C
A
D
E
Nipple
Junction Box Screw
Cross bar
Junction Box
(wall)
Wire connector
  • Page 1 1

George Kovacs P5220-647 User manual

Brand
George Kovacs
Model
P5220-647
Type
User manual
This manual is also suitable for

George Kovacs P5220-647 is an adjustable light fixture. It can be mounted on a ceiling or wall, making it suitable for various applications such as kitchens, bedrooms, and living rooms. It has a simple yet stylish design that will complement any décor. The fixture requires minimal assembly and comes with all the necessary mounting hardware. The installation instructions are clear and easy to follow, allowing for a quick and hassle-free installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents