AOpen SC-AK62 User manual

Category
Home audio sets
Type
User manual
RQT5769-4P
P
CD Stereo System
Operating Instructions
Model No. SC-AK77
SC-AK66
SC-AK62
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
PC
The illustrations show SC-AK77.
01 AK77/66/62 [P/PC] 24/7/01, 2:34 PM1
Before using
2
RQT5769
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These operating instructions are applicable to the following system.
These operating instructions, however, fundamentally explain the op-
eration of system SC-AK77.
System SC-AK77 SC-AK66 SC-AK62
Main unit SA-AK77 SA-AK66 SA-AK62
Front SB-AK77 SB-AK66 SB-AK66
Speakers Surround SB-PS70A SB-PS70A SB-PS70A
Center SB-PC70A SB-PC70A SB-PC70A
Before using
Supplied accessories .............................................. 2
Listening caution ..................................................... 3
IMPORTANT SAFETY INSTRUCTIONS ................... 4
Placement of speakers ............................................ 5
Connections ............................................................. 6
Basic connections (for supplied accessories) ................. 7
Optional antenna connection .......................................... 7
Subwoofer connection .................................................... 7
External unit connection ................................................. 8
Concerning the remote control .............................. 9
Battery installation .......................................................... 9
Correct method of use ................................................... 9
Front panel controls .............................................. 10
Turning the demo function off .............................. 12
Auto-off function .................................................... 12
Setting the time...................................................... 13
Radio operations
Listening to radio broadcasts ............................... 14
Presetting radio broadcasts ................................. 15
Compact disc operations
Concerning compact discs ................................... 16
Listening to compact discs .................................. 17
Direct access play ........................................................ 18
Repeat play .................................................................. 18
Random play ................................................................ 18
Program play ............................................................... 19
To listen to special CDs and tracks
(CD Manager function) .............................................. 20
Cassette deck operations
Listening to tapes .................................................. 21
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PRODUCT DAMAGE, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON
THE APPARATUS.
Table of contents
Please check and identify the supplied
accessories.
Use numbers indicated in parentheses when
asking for replacement parts.
(Only for U.S.A.)
To order accessories contact 1-800-332-5368
or web site (http://www.panasonic.com).
AC power supply cord . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.
(RJA0065-A)
FM indoor antenna (RSA0006-J) . . . . . . . . . . . . . . . . . . 1 pc.
Supplied accessories
THE FOLLOWING APPLIES ONLY IN THE U.S.A.:
CAUTION:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television
reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
¡Reorient or relocate the receiving antenna.
¡Increase the separation between the equipment and re-
ceiver.
¡Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
¡Consult the dealer or an experienced radio/TV technician
for help.
Any unauthorized changes or modifications to this equip-
ment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
02-05 AK77/66/62 [P/PC] 13/7/01, 1:38 pm2
Before using
3
RQT5769
AM loop antenna
(RSA0029-L) .................. 1 pc.
Remote control transmitter .............................................. 1 pc.
Batteries ........... 2 pcs.
(R6, AA, UM-3)
SC-AK77:
(N2QAHB000013)
Recording operations
Before recording (Deck 2 only) ............................ 22
Tape-to-tape recording .......................................... 23
Recording from radio broadcasts ........................ 24
Recording from compact discs ............................ 25
To record special CDs and tracks
(CD Manager function) ............................................. 26
Sound quality/sound field operations
Using the built-in sound quality/
sound field settings .......................................... 27
Enhancing the sound quality ................................ 27
Boosting the super woofer ................................... 27
Varying the sound quality with the manual
equalizer ............................................................ 28
Varying the sound quality with
the acoustic image (Al) equalizer .................... 28
Surround systems ................................................. 29
6CH DISCRETE INPUT mode ................................ 30
Enjoying sound with DOLBY PRO LOGIC ........... 31
To playback a Dolby Surround source with
Dolby Pro Logic ........................................................ 31
Enjoying sound with stereophonics .................... 32
Timer and others
Using the timer ...................................................... 33
Using the play/record timer .......................................... 33
Using the sleep timer ................................................... 34
Using an external unit ........................................... 35
Convenient functions ............................................ 35
Reference
Troubleshooting guide .......................................... 36
Maintenance ........................................................... 36
Servicenter List (U.S.A.) ........................................ 37
Warranty (U.S.A.) ................................................... 38
Specifications ........................................................ 39
Product Service ..................................................... 39
SC-AK66, SC-AK62:
(N2QAHB000014)
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Listening caution
Selecting fine audio equipment such as the unit you’ve just pur-
chased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equip-
ment offers. This manufacturer and the Electronic Industries Associ-
ation’s Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion—and, most importantly, without affecting your sensitive
hearing.
We recommend you to avoid prolonged exposure to excessive noise.
Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal” can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE
your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
CAUTION!
DO NOT INSTALL, OR PLACE THIS UNIT, IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
02-05 AK77/66/62 [P/PC] 13/7/01, 1:38 pm3
Before using
4
RQT5769
Safety
1. Power source—Connect the unit to a power source of the type
described in these instructions or as marked on the unit.
2. Polarization—The unit is equipped with a polarized power plug
where one blade is wider than the other. This safety feature
ensures that the plug fits into your household AC outlet only one
way. If the plug doesn’t fit one way, try reversing it. If the plug
still doesn’t fit, contact an electrician to replace the obsolete
outlet. Do not attempt to defeat the safety purpose of the plug.
3. Power cord protection—Route the AC power supply cord so
that it will not be walked on or pinched by items placed on or
against it. Never take hold of the plug or cord with wet hands.
Always grasp the plug body firmly when connecting and
disconnecting it.
4. Overloading—When connecting the AC power supply cord, be
careful not to overload the household AC outlet, extension cord,
or outlet from any other device as this can result in fire or electric
shock.
5. Nonuse periods—Turn the unit off when it is not in use. Unplug
the unit from the household AC outlet if it is not to be used for a
long time. Unplug the unit during lightning storms.
6. Attachments and accessories—Use only the attachments and
accessories recommended in these operating instructions.
Installation
Placement
1. Ventilation—Situate the unit so that it receives proper ventilation.
Do not install in a confined space such as a bookcase or cabinet.
Allow at least 10 cm (4
inches) clearance from the rear of the
unit. To prevent the risk of electric shock or fire due to overheating
ensure curtains and other materials do not obstruct the unit’s
ventilation.
2. Foreign material—Ensure objects and liquids do not get into
the unit. Avoid exposing the unit to excessive smoke, dust,
mechanical vibration, and shock.
3. Magnetism—Situate the unit away from equipment and devices
that generate strong magnetic fields.
4. Stacking—Do not place heavy objects on top of this unit.
5. Surface—Place the unit on a flat, level surface.
6. Carts and stands—Use the unit only with carts
and stands recommended by the manufacturer.
Move carts with care. Sudden stops, excessive
force, and uneven surfaces can cause carts to
overturn.
7. Wall and ceiling mounting—Do not mount the unit on walls or
ceilings unless specified in the instructions.
Environment
1. Water and moisture—Do not use the unit near water, such as
near a bathtub or swimming pool. Avoid damp basements.
2. Heat—Situate the unit away from heat sources, such as radiators.
Do not situate where temperatures fall below 5°C (41°F) or rise
above 35°C (95°F).
3. Power lines—Take care when setting up an outdoor antenna
that it is not near overhead power lines, electric lights, or electri-
cal circuits, and that there is no danger of the antenna falling on
power lines, electric lights, or electrical circuits. When installing
an outdoor antenna, take extreme care not to touch such power
lines or circuits, as contact with them can be fatal.
Maintenance
(See page 36 for details.)
Unplug the unit from the household AC outlet before cleaning.
Clean with a damp cloth.
Do not use abrasive pads, scouring powders, or solvents.
Service
1. Damage requiring service —The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing —Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing
to authorized servicing personnel.
3. Replacement parts —When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check —After repairs or service, ask the servicer to
perform safety checks to confirm that the unit is in proper working
condition.
NEC–NATIONAL ELECTRICAL CODE
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below.
Keep these operating instructions handy for future reference.
4. Outdoor antenna grounding—If you connect an outdoor an-
tenna, ground the antenna system to protect against voltage
surges and built-up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1990, provides information
about grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of ground-
ing conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding elec-
trode. Refer to this diagram.
ANTENNA LEAD
IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
02-05 AK77/66/62 [P/PC] 13/7/01, 1:38 pm4
Before using
5
RQT5769
If irregular coloring occurs on your television
The front and center speakers are designed to be used close to a
television, but the picture may be affected with some televisions
and set-up combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
Note
Surround speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
Placement of speakers
Placement of front speakers
SC-AK77
Place the speakers so that the super woofer is on the outside.
SC-AK66
SC-AK62
Speakers are designed identically so that no left or right channel
orientation is necessary.
Note
• Keep your speakers at least 10 mm (
13
/32˝) away from the system
for proper ventilation.
• To avoid damage to the speakers, do not touch the speaker cones
if you have taken the nets off.
Placement of center/surround speakers
Center speaker
Place the center speaker above your TV, as close to it as possible.
Note
Do not place the center speaker on this unit as sound quality will be
affected.
Surround speakers
As well as enjoying normal stereo reproduction with the left and
right front speakers, surround speakers can also be connected to
the system in order to enjoy a feeling of depth and movement of
sound.
Place the speakers with the Panasonic logo facing toward the lis-
tening position.
We recommend that surround speakers be placed on the side of, or
slightly behind, the listener at ear level.
However, the position should be adjusted to your personal prefer-
ence, because the effect varies to some degree depending upon
the type of music and the music source.
CC
CC
C Attaching to a wall
Set speaker onto screws and slide through bracket to lock into posi-
tion.
Note
The wall or pillar on which the speaker systems are to be attached
should be capable of supporting a weight of 5 kg.
Caution
Use the speakers only with the recom-
mended system.
Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result
in the risk of fire.
Consult a qualified service person if damage
has occurred or if you experience a sudden
change in performance.
Do not attempt to attach these speakers to
walls using methods other than those
described in this manual.
A
B
A
B
C
SC-AK77
SC-AK66
Front view Front view
Surround speaker
(Left)
Surround speaker
(Right)
Front speaker
(Left)
Center speaker
Super woofer
Front speaker
(Right)
Main unit
TV (not included)
Wall or pillar
30
35 mm
7
9 mm
ø7.5-9.5
100 mm
SC-AK62
02-05 AK77/66/62 [P/PC] 13/7/01, 2:54 pm5
Before using
6
RQT5769
Connections
1 3
GND
FM ANT
( )
2
1
FM indoor antenna
Adhesive tape
2
LOOP
EXT
AM ANT
AM loop antenna
SC-AK77
Red (+)
Red (+)
Gray (+)
Black (–)
Black (–)
Blue (–)
Gray (+)
Blue (–)
SC-AK66
Red (+)
Red (+)
Black (–)
Black (–)
Gray (+)
Gray with
blue line (–)
Gray (+)
Gray with
blue line (–)
A
B
C
Blue
Gray
Gray
Blue
Blue
Black
Red
Red
Gray
Gray
Red
Black
4
3
2
1
C
3
AB
SC-AK62
06-07 AK77/66/62 [P/PC] 13/7/01, 3:07 pm6
Before using
7
RQT5769
Basic connections (for supplied accessories)
Plug the AC power cord into a household AC outlet only after all
other connections have been made.
To prepare the antenna wires and speaker cords, twist the vinyl
cover tip and pull off.
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio
signals are received with the least amount of interference.
Note
For best reception sound quality:
An FM outdoor antenna is recommended.
Connect the AM loop antenna.
After attaching the antenna, turn on the system and tune in a
broadcast station. Then, turn the antenna to the angle of best
reception and least interference.
Connect the speaker cables.
A Surround speaker cords
B Center speaker cord
C Front (L/R) speaker cords
Connect each end of the speaker cables to the terminal lever of
the same color so (+) and (–) are correct. Never allow the
exposed wires to contact each other when connected.
SC-AK77
only
LF: Low Frequency HF: High Frequency
Incorrect connection can damage the unit.
Caution
Use only the supplied speakers.
The combination of the main unit and speakers provide the best
sound. Using other speakers can damage the unit and sound
quality will be negatively affected.
Connect the AC power cord.
Note
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.
Optional antenna connections
You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.
FM outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.
1 Remove a piece of the outer vinyl insulator.
2 Twist the shield braid.
3 Expose the core wire.
Note
An outdoor antenna should be installed by a qualified technician only.
AM outdoor antenna
Connect the outdoor antenna without removing the AM loop antenna.
Run 5 to 12
m of vinyl-covered wire horizontally along a window or
other convenient location.
Note
When the unit is not in use, disconnect the outdoor antenna to prevent
possible damage that may be caused by lightning. Never use an
outdoor antenna during an electrical storm.
Subwoofer connection
You can enhance the bass effect by connecting a subwoofer.
30
mm
(1
3
/
16
˝)
15
mm
(
19
/
32
˝)
1
2
3
GND
FM ANT
( )
FM outdoor antenna
(not included)
75 coaxial cable
(not included)
Shield braid
Core wire
5 -12
m
(
16 40
ft.)
LOOP
EXT
AM ANT
AM outdoor antenna (not included)
AM loop antenna
(included)
SUBWOOFER OUT
Rear panel of this unit
Subwoofer (not included)
06-07 AK77/66/62 [P/PC] 13/7/01, 1:41 pm7
Before using
8
RQT5769
A
B
C
(MIX OUT)
SURROUND
SUBWOOFER
FRONT
CENTER
DVD player with
5.1 ch OUT
(not included)
Rear panel of this unit
RL
AUX
SC-AK77
SC-AK66
RL
AUX
AUDIO OUT
Laser disc player/ DVD player
without 5.1 ch OUT (not included)
Rear panel of this unit
SC-AK77
RL
AUX
RL
AUX 1
AUX 2
AUDIO OUT
Video cassette recorder
(not included)
Rear panel of this unit
SC-AK77
RL
AUX 1
AUX 2
D
SC-AK77
SC-AK66
RL
AUX
RL
AUX 1
AUX 2
AUDIO OUT
Record player (not included)
Rear panel of this unit
R L
R L
FRONT
CENTER
SUBWOOFER
SURROUND
RL
AUX 1
AUX 2
6CH
DISCRETE
INPUT
SC-AK62
SC-AK66
SC-AK62
SC-AK66
SC-AK62
SC-AK62
Connections
External unit connection
• For details, refer to the manual of the units which are to be connected.
• When units other than those described below are to be connected,
please consult with your dealer.
DVD player with 5.1 ch OUT
Sound cannot be produced unless an DOLBY DIGITAL decoder is
connected.
A DVD player with a built-in DOLBY DIGITAL decoder is recom-
mended.
This will allow you to enjoy the brilliant images and powerful sounds
available on DVD software.
Laser disc player/DVD player
(without 5.1 ch OUT)
This unit has Dolby Pro Logic circuitry. If the audio output of video
equipment is connected to the AUX 1 or AUX 2 (SC-AK66 and
SC-AK62: AUX) terminal of this unit, the sound will be reproduced
with the same powerful stereophonic effects found in movie
theaters.
Video cassette recorder
You can enjoy only sound of the video cassette recorder.
Record player
Sound cannot be produced unless an phono equalizer (not included)
is connected.
A record player with a built-in phono equalizer is recommended.
A
C
B
D
08-09 AK77/66/62 [P/PC] 13/7/01, 1:44 pm8
Before using
9
RQT5769
Concerning the remote control
Battery installation
Insert the batteries observing the correct polarities (e, d).
Use of batteries
Align the poles (+ and –) properly when inserting the batteries.
Do not mix old and new batteries or different types of batteries.
Do not recharge ordinary dry cell batteries.
Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
Remove the batteries if the unit is not to be used for a long time.
Do not keep together with metallic objects such as necklaces.
Do not use rechargeable type batteries.
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Correct method of use
Operation notes
Do not place obstacles between the remote control signal sensor
and remote control unit.
Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
Take care to keep the remote control signal sensor and end of the
remote control unit free from dust.
If this system is installed in a rack with glass doors, the glass doors’
thickness or color might make it necessary to use the remote control
a shorter distance from the system.
To prevent damage
Never place heavy items on top of the unit.
Do not disassemble or reconstruct the unit.
Do not spill water or other liquids into the unit.
B
A
A
R6, AA, UM-3
B
30
30
˚
˚
Remote control
signal sensor
Transmission
window
About 7 meters in front of
the signal sensor
08-09 AK77/66/62 [P/PC] 13/7/01, 1:44 pm9
Before using
10
RQT5769
Front panel controls
Main unit
No. Name Ref. page
1 AC supply indicator (AC IN)
This indicator lights when the unit is connected to the AC power
supply.
2 Standby/on switch (f/I, POWER) ............................. 13
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
3 Play timer/record timer button
(rPLAY/rREC) ......................................................... 33
4 Clock/timer button (CLOCK/TIMER) ............ 13, 33, 34
5 Deck 1 open button (c DECK 1 OPEN) .................. 21
6 Deck 1 cassette holder ..............................................21
7 Disc tray
8 DOLBY PRO LOGIC on/off button (p PL).............. 31
9 6-channel input button (6CH INPUT) ................. 30, 35
! Surround on/off button (SURROUND) ..................... 32
Deck 2 open button (c DECK 2 OPEN) .................. 21
# Deck 2 cassette holder ..............................................21
$ CD open/close button (c OPEN/CLOSE) ................ 17
% Headphone jack (PHONES) ...................................... 35
Center console
& Remote control signal sensor ................................... 9
(
SC-AK77
AUX 1/2 button (AUX 1/2) .......................................... 35
SC-AK66
SC-AK62
AUX button (AUX) ...................................................... 35
) Tuner/band select button (TUNER, BAND) ............. 14
~ Tape/deck select button (TAPE, DECK 1/2) ............ 21
+ CD button (CD) ...........................................................20
, Display
- Disc direct play buttons and indicators
(CD 1 ~ CD 5) .............................................................17
. CD manager button
(CD MANAGER) ......................................................... 20
/
SC-AK77
only
SC Reverse mode select button (REV MODE) .............. 21
: Display select/demonstration button
(-DISPLAY/–DEMO) ............................................. 12, 35
; Tape edit button (TAPE EDIT) .................................. 23
< Basic operating buttons
Functions change according to the source.
=
SC-AK77
only
Super 3D AI button (SUPER 3D AI) ......................... 28
> Super sound EQ button (SUPER SOUND EQ) ........ 27
? Jog control (SOUND EQ) ...........................................27
@
SC-AK77
only
Joy stick (SOUND EQ) ............................................... 28
[
SC-AK77
only
Super woofer on/off button (S.WOOFER) ............... 27
\ Volume control (VOL) ................................................ 14
] Recording start/stop button (a REC/STOP) ............ 24
A
B
A
B
DISPLAY/
DEMO
AUX CD
SOUND EQ
SUPER SOUND EQ
BAND
TUNER
DECK 1/2
TAPE
VOL
DOWN
UP
CD 1 CD 2 CD 3 CD 4 CD 5
DISPLAY/
DEMO
AUX 1/2 CD
SUPER 3D AI
SOUND EQ
S.WOOFER
SUPER SOUND EQ
BAND
TUNER
DECK 1/2
TAPE
VOL
DOWN
UP
CD 1 CD 2 CD 3 CD 4 CD 5
12
3
1
2
4
5
6
7
13
8
14
9
10
11
15
16 17 18 19
26
27
28
29
30
23
24
25
31
32
33
21
20
22
15
16 17 18 19
26
28
29
24
25
32
33
21
20
22
SC-AK77
SC-AK66
SC-AK62
10-11 AK77/66/62 [P/PC] 13/7/01, 2:50 pm10
Before using
11
RQT5769
SC-AK77
SC-AK66
2
35
34
16
27
38
8
40
29
39
32
17
36
37
41
43
42
45
44
48
47
18
19
46
49
2
35
34
16
38
8
40
29
39
32
17
36
37
41
43
42
45
44
48
47
18
19
46
49
SC-AK62
Remote control
Buttons such as 2 functions in exactly the same way as the buttons
on the main unit.
No. Name Ref. page
2 Standby/on button (f) ...............................................13
^ Auto off button (AUTO OFF) .................................... 12
_ Numeric buttons (10, 1–9, 0) ............................ 15, 18
{ Program button (PROGRAM) ................................... 19
| Cancel button (CANCEL) ...........................................19
(
SC-AK77
AUX 1/2 button (AUX 1/2) .......................................... 35
SC-AK66
SC-AK62
AUX button (AUX) ...................................................... 35
) Tuner/band select button (TUNER) ......................... 14
? EQ select button (EQ) ................................................27
=
SC-AK77
only
3D AI select button (3D AI) ...................................... 28
8 DOLBY PRO LOGIC on/off button (p PL).............. 31
}
SC-AK77
Reverse side playback/pause/preset
channel select button (
;;
;;
;/
JJ
JJ
J/3) ..................... 15, 17, 21
SC-AK66
SC-AK62
Pause/preset channel select button (
JJ
JJ
J/3) ........ 15, 17
V Test signal output button (TEST) ............................ 31
0 Channel select button (CH SELECT) ....................... 30
\ Volume buttons ( VOLUME +) ................................ 14
1 Sleep button (SLEEP) ................................................ 34
2 Muting button (MUTING) ...........................................35
3 Disc button (DISC) .....................................................18
4 Random button (RANDOM) ...................................... 18
5 Repeat button (REPEAT) ...........................................18
+ CD button (CD) ...........................................................19
~ Tape/deck select button (TAPE) .............................. 21
6 Skip/search buttons (
gg
gg
g/
((
((
(,
))
))
)/
ff
ff
f) ........ 17, 22
7 Play/preset channel select button (-/4).... 15, 17, 21
8 Stop/program clear button (L/CLEAR) ........ 17, 19, 21
9 Channel level select buttons
( CH LEVEL +) ..........................................................31
Front panel controls
10-11 AK77/66/62 [P/PC] 13/7/01, 3:24 pm11
Before using
12
RQT5769
A
B
AUTO OFF
DISPLAY/
DEMO
DISPLAY/
DEMO
Turning the demo function off
If the clock has not been set, a demonstration of the display is shown
when the unit is switched to standby.
This function is set to on at the time of purchase.
Press and hold [-DISPLAY/–DEMO] until “NO DEMO” is
displayed.
The display changes each time the button is held down.
NO DEMO (off) DEMO (on)
Auto-off function
by remote control only
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
Press [AUTO OFF].
“AUTO OFF” is shown on the display.
Note
This function does not work if the source is tuner, AUX 1/2 (SC-AK66
and SC-AK62: AUX) or 6CH INPUT.
To cancel
Press [AUTO OFF] again to clear “AUTO OFF” from the display.
For your reference
The setting is maintained even if the unit is turned off. When the unit
is turned on again, “AUTO OFF” is displayed and the unit functions as
described above.
If you select tuner, AUX 1/2 (SC-AK66 and SC-AK62: AUX) or 6CH
INPUT as the source, “AUTO OFF” goes out. It comes on again when
you select CD or tape.
A
B
12-13 AK77/66/62 [P/PC] 13/7/01, 1:49 pm12
Before using
13
RQT5769
1
2
3
4
SC-AK77
SC-AK66
1
2
4
3
SC-AK62
Setting the time
This is a 12-hour display clock.
This example in the figure shows how to set the time for 4:25 p.m..
Switch on the power.
Press [CLOCK/TIMER] to select CLOCK.
Every time you press the button:
CLOCK RECPLAY
(within 7 seconds or so)
Press [TUNE/TIME ADJ (3) or (4)] to show the
present time.
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display the time when system is ON
Press [CLOCK/TIMER] to select CLOCK.
To display the time when system is OFF
Press [CLOCK/TIMER].
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.
Note
The clock may lose or gain some time over a period. Readjust if
necessary.
Previous display
12-13 AK77/66/62 [P/PC] 13/7/01, 1:49 pm13
14
Radio operations
RQT5769
1
2
3
4
A
SC-AK77
SC-AK66
SC-AK62
MHz
TUNED
ST
1
2
3
4
TUNED
STEREO
MONO
MHz
MHz
Press [TUNER, BAND] to select band.
The unit comes on automatically.
Every time you press the button:
FM AM
Press [
LL
LL
L TUNE MODE] to select “MANUAL”.
Every time you press the button:
MANUAL PRESET.
Press [TUNE/TIME ADJ (3) or (4)] to select the
frequency of the required station.
“TUNED” is displayed when a radio station is tuned.
“STEREO” (“ST” for SC-AK66 and SC-AK62) is displayed when
a stereo FM broadcast is being received.
Adjust the volume.
Auto tuning
Press and hold [TUNE/TIME ADJ (3) or (4)] for a moment until the
frequency starts changing rapidly. The unit begins auto tuning,
stopping when it finds a station.
Auto tuning may not function when there is excessive interference.
To cancel auto tuning, press [TUNE/TIME ADJ (3) or (4)] once
again.
If noise is excessive in FM
Press [ g/( FM MODE/BP] to display “MONO”.
This mode improves sound quality if reception is weak, but
broadcasts will be heard in monaural.
Press [ g/( FM MODE/BP] again to cancel the mode.
“MONO” goes out. MONO is also canceled if the frequency is
changed.
Turn off “MONO” for normal listening. Stereo and monaural
broadcasts are automatically played as they are received.
FM allocation setting
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
Press and hold [TUNER, BAND]. After a few seconds, the display will
change to a flashing display of the current minimum FM frequency.
If you continue to hold the button down, the minimum frequency will
change. Release the button at this time.
To return to the original frequency indication, repeat above.
Note
After changing the “allocation” setting, the frequencies you previously
preset in the memory will be cleared.
Sound is momentarily interrupted if you load/unload tapes while
listening to an AM broadcast.
Listening to radio broadcasts
A
14-17 AK77/66/62 [P/PC] 13/7/01, 1:53 pm14
15
Radio operations
RQT5769
A
B
1
2
3
1
2
3
SC-AK77
MEMO
MHz
SC-AK66
SC-AK62
MEMO
MHz
MHz
Presetting radio broadcasts
There are two methods of presetting stations.
Automatic presetting : All the stations the tuner can receive are
preset.
Manual presetting : You can select the stations to preset and
the order they are preset in.
Up to 12 stations each can be set in the FM and AM bands.
Automatic presetting
Do the following once each for FM and AM.
Preparation:
Tune to the frequency where presetting is to begin (A page 14).
Press and hold [MEMORY
))
))
)/
ff
ff
f ] .
Release the button when frequency begins to change.
The tuner presets all the stations it can receive into the channels in
ascending order. When finished, the last station memorized is tuned
in.
Manual presetting
Preset the stations one at a time.
1 Press [TUNER, BAND] to select the FM or AM.
2 Press [MEMORY )/f ] then press [TUNE/TIME ADJ (3)
or (4)] to tune to the required station.
3 Press [MEMORY )/f ] then press [TUNE/TIME ADJ (3)
or (4)] to tune to select a channel.
4 Press [MEMORY )/f ].
The station occupying a channel is erased if another station is preset
in that channel.
Selecting channels
Press [TUNER] to select FM or AM.
The unit comes on automatically.
Every time you press the button:
FM AM
Press the numbered buttons to select the channel.
To select channel 10 or over
Press [j] then the two digits.
Adjust the volume.
On the main unit
1 Press [TUNER, BAND] to select FM or AM.
2 Press [L TUNE MODE] to select PRESET.
3 Press [TUNE/TIME ADJ (3) or (4)] to select the preset channel.
Preset channel
A
B
by remote control
14-17 AK77/66/62 [P/PC] 13/7/01, 1:53 pm15
16
Compact disc operations
RQT5769
A
B
C
E
D
F
XXXXXX XXX XXXXXXX
XXXX XX XXXXX
XXXX XX XXXXX
XXXX XXXX XXXXX
XXXX XX XXXXX
XXXX XXXX XXXXX
XXXXXX XXX XXXXXXX
XXXX XX XXXXX
XXXX XX XXXXX
XXXX XXXX XXXXX
XXXX XX XXXXX
XXXX XXXX XXXXX
XX
X
XX
X XX
X
XX
XX
XX
X
X
XX
X
X XX
X
X
X
X
X X
X
X
X
X
X
XX
XX
X
X
X
XX
X
X
X
X
XXX XXXX
XXXX
XXX XXX XXXXX
XX
XXXXXXXX XXXX
XXX XXXX
XXXX
XXX XXXX
XXXX
XXX XXXX
XXXX
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
XXXX XXXX XXXXX XXXX XX
XXXX XXXX XXXXX
XXXX XXXX XXXXX
XXXX XXXX
8 cm CD
12 cm CD
Concerning compact discs
With this system, you can only play compact discs
having this mark.
A However, do not use irregular shaped CDs.
CDs of the sort can damage the unit.
~ Handling precautions
If you are taking the disc from a cold to a warm environment,
moisture may form on the disc. Wipe this off with a soft, dry, lint-free
cloth before using the disc.
Do not write on the label side with a ball-point pen or other writing
instrument.
Do not use record cleaning sprays, benzine, thinner, static electric-
ity prevention liquids or any other solvent.
Do not attach labels or stickers to CDs. (Do not use CDs with
exposed adhesive from tape or left over peeled off stickers.)
Do not use scratch-proof protectors or covers other than those
specified for use with this system.
Do not use CDs printed with label printers available on the market.
Storage precautions
Be sure to store discs in their cases to protect them from dust,
scratches, and warping.
Do not place or store discs in the following places
Locations exposed to direct sunlight
Humid or dusty locations
Locations directly exposed to a heat vent or heating appliance
In the glove compartment or on the rear deck of an automobile
To prevent damage
Always observe the following points.
E Load only 1 CD on the tray.
F Load CDs as shown in the figure.
The adapter is not needed with 8
cm CDs (singles).
Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
Do not move the system while tray is opening/closing, or when
loaded.
Always unload all CDs before moving the system.
Do not put anything except CD in tray.
Do not use cleaning CDs or CDs which are badly warped or
cracked.
Do not disconnect the power cord from the household AC outlet
during disc changing operation.
Wipe from inside outward.
How to clean CDs
Do not touch the recorded
surface.
How to hold CDs
B D
14-17 AK77/66/62 [P/PC] 13/7/01, 1:53 pm16
17
RQT5769
Compact disc operations
1
2
4
3
A
CD 1 CD 2 CD 3 CD 4 CD 5
DISC
DISC
DISC
OPEN/CLOSE
SC-AK77
B
SC-AK66
SC-AK62
SC-AK77
SC-AK66
891075 64321 11 12
3
4
1
1 2 3 4
5 6 7 8
9
10 11 12
13 14 15
SC-AK62
Track number
Elapsed playing time (Of current track number)
Number of tracks
Total playing time
Label must face upward.
Disc number
Listening to compact discs
This unit can play CD-DA format audio CD-R and CD-RW that have
been finalized
upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the condition
of the recording.
Finalizing is a process that enables CD-R/CD-RW players to play
audio CD-R and CD-RW.
Press [c OPEN/CLOSE] button.
The unit will come on automatically and the tray opens.
Set CD in the tray.
To continue loading CDs in the other trays
Press another [(CD 1) ~ (CD 5)] to select the required tray and
press [c OPEN/CLOSE] to open the tray.
The current tray closes and the selected tray automatically
opens.
Press [c OPEN/CLOSE] to close the tray.
Press [(CD 1) ~ (CD 5)] to play your desired disc.
(If the desired CD is indicated on the display panel, the same
operation can be accomplished by pressing [-].)
Play will start from the first track on the disc and will continue
until the last track of the final disc is played (see below).
Adjust the volume.
A To stop the disc play
Press [L].
B When appears on the display
It indicates there are 16 (SC-AK66 and SC-AK62: 13) or more
tracks on the disc in the playing position.
Disc indicators
The disc indicators light whenever the tray is in the playing position
whether it is loaded or not.
What is meant by final disc?
For example, if play starts from disc 4, disc 3 will be the final disc.
Order of progression:
Disc 45123
One touch play
If the unit is in standby mode and a CD is loaded, press [CD] or
[(CD 1) ~ (CD 5)].
The unit will come on automatically and play will start.
To pause (For SC-AK77)
Press [;/J] during playback.
To resume playback, press [;/J].
(For SC-AK66 and SC-AK62)
Press [ J ] during playback.
To resume playback, press [ J ].
To search forward/ Hold down [g/(] (backward)
backward (Search) or [)/f] (forward) during
playback or pause mode.
To skip forward/ Press [g/(] (backward) or
backward [)/f] (forward) during
playback or pause mode.
Notes
During random play (A page 18), you cannot skip to tracks which
have already been played.
During program play (A page 19) or random play, you can search
forward or backward only within the current track.
During program play, skipping is always in the programmed order,
whether forward or backward.
Always stop the changer before loading or changing CDs. You
cannot change CDs while a disc is playing.
14-17 AK77/66/62 [P/PC] 13/7/01, 1:53 pm17
18
RQT5769
Compact disc operations
1
A
B
2
3
DISC
DISC
DISC
RANDOM
1
3
2
Listening to compact discs
Direct access play
by remote control only
Press [DISC].
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
Press the numeric button to select the desired track
number.
The CD will be played from the selected track to the last track
of the final disc (A page 17).
To select a two-digit track
Press [10] and then the two numbers you want within 10 seconds or
so.
For example
Track no. 20: [10] [2] [0]
Track no. 35: [10] [3] [5]
Repeat play
A Press [REPEAT] before or during play.
All tracks on the loaded CDs are repeated.
To cancel repeat play
Press [REPEAT] once again.
To repeat your favorite tracks
1. Program the tracks you want (perform steps 1 ~ 6 on page 19).
2. Press [REPEAT] and make sure “ ” is displayed.
3. Press [-/4]. Playback will start.
To repeat just one track
Set the 1-TRACK mode (A page 20), press [REPEAT] before or
during playback, and make sure “ ” is displayed.
Random play
B Press [RANDOM].
Every time you press the button:
1-DISC ALL-DISC
Previous display
To random play just one disc
Select the CD you want to random play with [(CD 1) ~ (CD 5)] and
press [RANDOM] to select 1-DISC.
To random play all the loaded CDs
Press [RANDOM] to select ALL-DISC.
All tracks on the CD(s) will be played in random order. Playback will
stop automatically when all tracks have been played.
To cancel random play
Press [RANDOM] to clear RANDOM display.
Note
You can use random play with your program. Only the programmed
tracks will be played, but in random order.
by remote control only
by remote control only
18-20 AK77/66/62 [P/PC] 13/7/01, 1:56 pm18
19
RQT5769
Compact disc operations
1
A
B
2
3
4
5
7
DISC
PRGM
DISC
DISC
DISC
DISC
DISC
DISC
1
7
4
2
3
5
Listening to compact discs
Program play
You can program up to 24 tracks.
Press [CD].
Ensure CD is stopped.
Press [PROGRAM].
Press [DISC].
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
Press the numeric button to select the desired track.
Repeat steps 3 through 5 until you have pro-
grammed all the tracks you want.
Press [
--
--
-/4].
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
Pressing [L/ CLEAR] will cancel program play, but it will also erase
the entire program.
To select a two-digit track
Press [10] and then the two numbers you want.
A When “CD FULL” appears
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
B You can do the following during program mode
Check program contents.
Press [g/(] or [)/f].
Every time you press one of the buttons, the track and program
No. are shown on the display.
Add to the program.
Repeat steps 3 through 5.
Cancel entries.
From the last Press [CANCEL].
programmed track
A specified track Select the track with [g/(] or
only [)/f], and press [CANCEL] within
3 seconds.
All tracks Press [L/CLEAR].
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can play it
again as explained below.
1. Press [PROGRAM].
2. Press [-/4].
If you program a track not on your CDs
The track is initially programmed, but during program play, the player
will skip that track and will continue playing from the next programmed
item.
Program order
Indicates
program mode
Specified disc number
Specified track number
by remote control only
by remote control only
18-20 AK77/66/62 [P/PC] 13/7/01, 1:57 pm19
20
RQT5769
Compact disc operations
1
2
3
4
5
CD 1 CD 2 CD 3 CD 4 CD 5
SC-AK77
SC-AK66
7
CD MANAGER
DISC
DISC
DISC
DISC
DISC
1
2
3
4
5
SC-AK62
Specified disc number
Specified track number
Listening to compact discs
To listen to special CDs and tracks
(CD Manager function)
This function makes it easier for you to select special CDs and tracks
from amongst those loaded in the player.
You can use this function to make recordings as well.
There are 3 CD/track selection modes.
For playing back 1 track only from all loaded CDs
1-Track mode (1-TRACK)
For playing back 1 CD only from all loaded CDs
1-Disc mode (1-DISC)
For playing back 1 track on all loaded CDs
1-Track All-Disc mode (1-ALL)
Press [CD].
Ensure CD is stopped.
Press [CD MANAGER] to select the desired mode.
Every time you press the button:
1-TRACK
NORMAL
(OFF)
1-DISC 1-ALL
1-TRACK: Only one particular track is played.
1-DISC: The tracks on only one particular disc are played.
1-ALL: The same track numbers on each of the CDs are
played in succession.
(NORMAL: The original display is restored in about 3
seconds.)
Press [(CD 1) ~ (CD 5)] to select the disc you want.
Note
This step is not required if 1-ALL was selected in step 2.
Press [g/(] or [
))
))
)/
ff
ff
f] to select the desired
track.
Note
This step is not required if 1-DISC was selected in step 2.
Press [-].
The selected track will start.
To stop play
Press [L].
When playback ends
NORMAL will appear on the display for about 3 seconds, then the
CD MANAGER function will turn OFF automatically.
During play in the 1-ALL mode:
It is not possible to skip back to a CD whose track has already been
played.
If a CD does not have the designated track number, it is skipped
and play continues.
Notes
You can use the CD Manager function together with repeat play.
CD Manager function will be canceled when you press the
[RANDOM] button.
(OFF)
18-20 AK77/66/62 [P/PC] 13/7/01, 1:57 pm20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

AOpen SC-AK62 User manual

Category
Home audio sets
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI