Millenium PD-223 Pro Series BD Pedal Assembly Instructions

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de

DocID: 386636_EN_13.03.18

PD-223

Pro Series BD Pedal

Step 1: Fix the cardan shaft on the right bass drum pedal

Step 5: Mount beaters Done!

For the packaging, environmentally friendly materials have been chosen that

can be supplied to normal recycling. Ensure that plastic bags, packaging, etc.

are properly disposed of. Do not just dispose these materials with your normal

household waste, but make sure that they are fed to a recovery. Please follow

the notes and markings on the packaging.

Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of

babies and young children. Choking hazard!

The plasticiser contained in the rubber feet of this product may possibly react with the coating

of your parquet, linoleum, laminate or PVC oor and after some time cause permanent dark

stains.

In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad oor

protectors or a carpet.

Scope of delivery:

1 × bass drum pedal (right)

1 × bass drum pedal (left)

2 × beater

1 × cardan shaft

Accessory:

1 × drum key

Step 2: Fix the cardan shaft on the left bass drum pedal

Step 3: Adjust the aluminium hinge on the right bass drum pedal Step 4: Adjust the aluminium hinge on the leftbass drum pedal

Mil­lenium PD-223 Pro Series BD Pedal Assembly Instructions