Warning Light - HERMES Q (Part No. 6010560)
Edition: 06/2020 · Part No. 9003581
Assembly Instructions
The warning light allows the quick recognition of the device status at printers of the HERMES Q series.
Attention!
For using the warning light the printer rmware version 5.32 or higher is needed.
Contents of Delivery
Warning Light (1) inc.
- 2 Slot Nuts (2)
- 2 Spring Washers (3)
- 2 Screws M6x14 (4)
- 2 Screws M6x10 (5)
Mounting
1
to the bracket
► Switch off the printer.
► Insert the slot nuts (2) of the warning light
(1) into the slot (6) of the bracket.
► Tighten the screws (4).
1
to the frame of the printer
► Switch off the printer.
► Dismount the slot nuts (2).
► Attach the warning light (1) with 2 screws
(5) and 2 spring washers (3) at the
drillings (7) in the frame.
35 2
1
7
to the bracket of the service unit
► Switch off the printer.
► Dismount the slot nuts (2).
► Attach the warning light (1) with 2 screws
(5) and 2 spring washers (3) at the
drillings (8) in the bracket of the service
unit.
35 2
8
1