Signature Hardware SH422773 Installation guide

Type
Installation guide
1Deck-Mount Pot Filler Installation Instructions
DECK-MOUNT POT FILLER
INSTALLATION INSTRUCTIONS
Before installing, read entire Deck-Mount Pot Filler Installation Instructions. Observe all local building and safety codes.
For the following installation instructions it is assumed that a cold water supply line has been installed in the desired pot
ller location beneath the countertop.
Unpack and inspect the product for any shipping damages. If you nd damages, do not install. Contact Customer
Service at 1-866-855-2284. If you need assistance or have questions while installing your Pot Filler, contact
Customer Service.
We recommend consulting a professional if you are unfamiliar with installing kitchen xtures. Signature Hardware
accepts no liability for any damage to the oor, walls, plumbing or for personal injury during installation.
TOOLS AND MATERIALS:
INSTALLATION
1. Remove the lock nut, metal washer, and plastic washer from the pot ller.
2. Thread the pot ller through the mounting hole.
3. Thread the plastic washer, metal washer, and lock nut onto the pot ller from beneath the countertop. Tighten with a
basin wrench as needed.
4. Attach the pot ller handles as necessary and secure with an Allen wrench.
Basin Wrench
  • Page 1 1

Signature Hardware SH422773 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI