FuzzDog Moon Unit - Dark Side of the Fuzz Operating instructions

Brand
FuzzDog
Model
Moon Unit - Dark Side of the Fuzz
Type
Operating instructions
Moon Unit
Dark Side of the Fuzz
Nailing Dave G’s “Time” tone
Contents of this document are ©2023 Pedal Parts Ltd.
No reproduction permitted without the express written
permission of Pedal Parts Ltd. All rights reserved.
Before you dig in, ensure you download
and read the General Build Guide.
It contains all the information you need
for a successful outcome.
General
Build
Guide
Your first stop
for build info
Contents of this document are ©2023 Pedal Parts Ltd.
No reproduction permitted without the express written
permission of Pedal Parts Ltd. All rights reserved.
Schematic + BOM
R1 1M*
R2 56K
R3 470K
R4 100K
R5 10K
R6 100R
R7 820R
R8 100R
R9 56K
R10 100K
R11 56K
R12 2K7
R13 10K
R14 100R
C1 10u elec
C2 100p
C3 5n6
C4 220n
C5 4n7
C6 470p
C7 220p
C8 100u elec
C9 220p
C10 15n
C11 3n3
C12 2n2
C13 100u elec
C14 100u elec
Q1-3 BC109C
D1 1N5817
BODY 100KB**
BRITE 100KB
FUZZ 1KC
PRE 2KB
VOL 100KA
*Optional anti-pop
resistor not in original
circuit.
PCB layout ©2015 Pedal Parts Ltd.
NOTE:
cover image shows a previous version of the
PCB. The layout above is the current model.
Snap the small metal tag off the pots so
they can be mounted flush in the box.
You should solder all other board-mounted
components before you solder the pots.
Once they’re in place you’ll have no access to
much of the board.
There’s room to lay the large 100u caps flat as
shown in the cover image. This will give you
plenty of clearance in the enclosure.
This template is a rough guide only. You should ensure correct marking of your
enclosure before drilling. You use this template at your own risk.
Pedal Parts Ltd can accept no responsibility for incorrect drilling of enclosures.
FuzzDog.co.uk
Drill sizes:
Pots 7mm
Jacks 10mm
Footswitch 12mm
DC Socket 12mm
Toggle switches 6mm
Rotary switches 10mm
35mm
Drilling template
Hammond 1590B - 60 x 111 x 31mm
Drill sizes listed are minimum.
It’s a good idea to add 1mm to anything
mounted on the PCB that’ll poke
through the front of the enclosure.
27mm
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

FuzzDog Moon Unit - Dark Side of the Fuzz Operating instructions

Brand
FuzzDog
Model
Moon Unit - Dark Side of the Fuzz
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents