Enviro C60 Gas Fireplace User manual

Enviro
Brand
Enviro
Model
C60 Gas Fireplace
Type
User manual
1) Using the M5 screw and nuts provided. Attach all four pieces as shown in the
picuture above, use a 4mm allen key to tighten the screws. Make sure the notches on the
left and right pieces face downward and the top piece has the slots.
C Series - 4 Part Surround
50-3830 C34 4 PART SURROUND
50-3831 C44 4 PART SURROUND
50-3832 C60 4 PART SURROUND
50-3833 C72 4 PART SURROUND
TOP
BOTTOM
LEFT
RIGHT
M5 CAP SCREW (QTY 8)
M5 NUT(QTY 8)
PARTS LIST
4) For C34, C60, and C72 models insert the
notched tabs on the surround into the
forward most slots in the stove (circled
above).
3) The surround can accomodate up to 1”
of non combustable material.
1”
3/4”
1/2”
DATE: 26/07/2019 BY SHERWOOD INDUSTRIES LTD.
INTERNAL ASSEMBLY MANUAL
THIS DRAWING IS THE PROPERTY OF SHERWOOD INDUSTRIES LTD. AND MAY NOT BE COPIED, REPRODUCED, OR OTHERWISE DISCLOSED WITHOUT THE PRIOR APPROVAL OF SHERWOOD INDUSTRIES LTD.
1 of 2
SHEET:
C44 Master Assembly
STOVE:
UPDATED: ----/--/--BY --
REVISION:
0.0
Use the fasteners in the side of the
cabinet to attach the surround.
2) To aid in the installation of your
surround remove the safety screen by
lifting it up o the hooks and pulling the
screen assembly out.
C44 (#50-3831) ONLY
5) Reinstall the safety screen by inserting
the four tabs on the back of the screen
into the four slots further back in the
stove.
6) If surround starts to warp after
usage, use self-tapping metal screws
(not included) in the slots located on
the underside of the top surround piece.
(screen removal required, see steps 2 and
5)
  • Page 1 1
  • Page 2 2
  • Page 3 3

Enviro C60 Gas Fireplace User manual

Enviro
Brand
Enviro
Model
C60 Gas Fireplace
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents