Client: ALDI Australia
Project: Lumina STM32E 200+
Language: EN
Barcode: 930 5026 10 000 3 00151
7
Date: 27.09.2007
Version: 04
Page: 7 (of 8 pages)
OPERATION GUIDE
Stick Blender Operation
Attach the Stainless Steel Mixing Leg to the Motor Housing
as shown in the assembly diagram.
Ensure the Motor Housing and the Mixing Leg are
securely ‘locked’ together.
Plug the supply plug into a suitable 230-240Vpower outlet
and switch on.
Place the Stick Blender into the supplied Mixing Cup or
another sturdy container. If using the supplied Mixing
Cup, be sure to use the supplied Skid-Proof Base so that
the Mixing Cup does not slide around during use. Hold the
Mixing Cup and Motor Housing firmly and press the ON/
OFF switch to activate the Stick Blender motor. Carefully
mix the ingredients as required with a sideways action of
the Stick Blender.
Whisk Operation
Assemble the Whisk and the Whisk Attachment by
pushing the Whisk up into the hole at the base of the Whisk
Attachment. Ensure this is firmly locked into place.
Attach the completely assembled Whisk Attachment to the
Motor Housing as shown in the assembly diagram.
Ensure the Motor Housing and the Whisk Attachment are
securely ‘locked’ together.
Plug the supply plug into a suitable 230-240V power
outlet and switch on.
Place the whisk into a sturdy mixture bowl. Hold the
bowl and the Motor Housing firmly and press the ON/OFF
switch to activate the Stick Blender motor.
Carefully mix the ingredients as required with a sideways
action of the whisk.
Chopper Attachment
Assemble the 500ml Chopper Bowl and Detachable Blade
as shown in the assembly diagram. Place the Detachable
Chopper Blade onto the centre pin of the Chopper Bowl
and turn 90º to lock into place.
NOTE: Be careful when inserting the Chopper Blade, as it
has sharp edges.
Place food items into chopper bowl and attach to the
Chopper Attachment to the Chopper Bowl firmly.
Attach the Motor Housing to the Chopper Attachment
as shown in the assembly diagram. Ensure the Motor
Housing and the Chopper Attachment are securely ‘locked’
together
Firmly holding the Motor Housing, switch the ON/OFF
switch on to activate the Stick Blender motor.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•