Client: ALDI AU (OPT)
Project: SEB 1680F
Language: AUS
Date: 04.03.2008
Version: 02
Page: 2 (of 12 pages)
Barcode: 930 5026 16 000 9 00345
2
Done: KV
Check: SP
Done: KV
Check: SP
Electric Blanket - Single Size
What your 1 year warranty means
Great care has gone into the manufacture of this product, and
therefore it should provide you with years of good service when
used properly. In the event of product failure within its intended use
over the course of the first 1 year after the date of purchase, we will
remedy the problem as quickly as possible once it has been brought
to our attention. In the unlikely event of such an occurrence, or if
you require any information about the product, please contact us via
our after sales support services, details of which can be found in this
manual and on the product itself.
Client: ALDI AU (OPT)
Project: SEB 1680F
Language: AUS
Date: 04.03.2008
Version: 02
Page: 3 (of 12 pages)
Barcode: 930 5026 16 000 9 00345
3
Done: KV
Check: SP
Thank you for purchasing this product from our LUMINA® range. We
believe that we have provided you with a product that is both reliable
and value for money. We encourage you and your friends to choose
from our range of LUMINA® products again in future.
PACKAGE CONTENTS
1 Electric blanket - single size
1 Instruction manual
2 Warranty stickers
1 Warranty certificate
Please ensure that all contents are accounted for before disposing of
any packaging. Dispose of any plastic bags that may present a safety
risk to small children.
SAFETY INSTRUCTIONS
Please read the safety instructions before using your appliance, and
keep this instruction manual in a safe place for future reference.
Make sure that you know how the appliance functions and how to
operate it.
Maintain the appliance in accordance with the instructions to
ensure that it functions properly.
Keep this manual with the appliance. If the appliance is to be used
by a third party, this instruction manual must be supplied with it.
These safety instructions do not completely eliminate danger.
Proper accident prevention measures must always be used.
For any customer query or in the unlikely event of a product
failure, please phone or email our helpline for assistance before
attempting to return the product to the retailer.
Toll free help line: 1300 366 144
Email: info@telefixsales.com.au
•
•
•
•
•
•
•
•
•
INTRODUCTION
Client: ALDI AU (OPT)
Project: SEB 1680F
Language: AUS
Date: 04.03.2008
Version: 02
Page: 4 (of 12 pages)
Barcode: 930 5026 16 000 9 00345
4
Done: KV
Check: SP
Done: KV
Check: SP
INTRODUCTION ..................................3
PACKAGE CONTENTS .........................3
SAFETY INSTRUCTIONS ...................3
SAFETY WARNINGS ...........................5
OPERATION GUIDE .............................8
Parts Guide ......................................8
Before First Use ..............................9
Using the Blanket ...........................9
Troubleshooting ............................10
CARE AND CLEANING ......................10
TECHNICAL DATA .............................11
TABLE OF CONTENTS
Client: ALDI AU (OPT)
Project: SEB 1680F
Language: AUS
Date: 04.03.2008
Version: 02
Page: 5 (of 12 pages)
Barcode: 930 5026 16 000 9 00345
5
Done: KV
Check: SP
Electrical safety
This appliance must be connected to a suitable
230-240V~50Hz power supply.
Check if the voltage indicated on the appliance
corresponds to your local outlet voltage before you
connect the appliance. If it does not match, contact
the after sales support service (details listed in this
manual) and do not use the electric blanket.
For additional protection, it is recommended to use a
residual current safety device (safety switch) with a
rated residual operating current not exceeding 30mA.
Do not use your appliance with an extension cord
unless it has been checked and tested by a qualified
technician or service person.
In order to avoid electrical hazards, do not immerse the
power cord, plug, controller, or appliance in water or
any other liquid.
Ensure that your hands are dry before handling the
plug or switching on the appliance.
Ensure that the appliance is switched off and
unplugged when it is not in use.
Power cord and plug
Do not operate any appliance with a damaged power
cord, or after the appliance has been dropped or
damaged in any manner.
Check the power cord regularly for visible damage.
If the cord is damaged, it must be replaced by the
manufacturer, the manufacturer’s authorized service
centre, or similarly qualified personnel to avoid
hazards.
Fully unwind the power cord when in use, as a coiled
or tangled cord may overheat.
Do not unplug the appliance by pulling on the cord.
Instead, pull the plug to disconnect.
Keep the cord away from heat sources.
Do not let the power cord hang over the edge of a table
or bench top.
•
•
•
•
•
•
•
•
•
•
•
•
•
SAFETY WARNINGS
Client: ALDI AU (OPT)
Project: SEB 1680F
Language: AUS
Date: 04.03.2008
Version: 02
Page: 6 (of 12 pages)
Barcode: 930 5026 16 000 9 00345
6
Done: KV
Check: SP
Done: KV
Check: SP
Handling
Do not use the appliance for any purpose other than its
intended use. Use only as an under blanket.
A qualified technician or service person should check
this blanket annually to ensure that it is safe for use.
Examine the appliance frequently for signs of wear
or damage. If there are such signs, or if the appliance
has been misused, return it to the manufacturer or
authorized service centre prior to any further use.
Do not attempt to service this blanket. There are no
user-serviceable parts. If it malfunctions in any way,
return it to the manufacturer or authorized service
centre immediately.
Do not use this appliance at a high setting for
extended periods. This may result in skin burns.
This product is not intended for medical use in
hospitals.
Do not place the product on or near a hot gas flame,
electric element, or in a heated oven. Do not place on
top of any other appliance.
Check that the electric blanket is smooth, flat, and
properly secured on the mattress every day. Do not use
if the blanket is folded or creased.
Do not use folded or rucked.
Use the correct size of blanket for your bed. Do not, for
example, use a double blanket on a single bed. Do not
tuck the blanket in.
Do not allow the blanket heating wires to lie over the
edge of the mattress.
Do not use pins, needles, or other sharp items on your
electric blanket.
Do not switch the blanket on if it is moist or wet.
Do not use this electric blanket on or under any
waterbed or mechanically adjustable type of bed such
as a bunk or sofa bed.
Ensure that the controller and power cord cannot
become trapped in any bed or bedding.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SAFETY WARNINGS
Client: ALDI AU (OPT)
Project: SEB 1680F
Language: AUS
Date: 04.03.2008
Version: 02
Page: 7 (of 12 pages)
Barcode: 930 5026 16 000 9 00345
7
Done: KV
Check: SP
Children and persons in poor health
Never leave the blanket unattended while it is turned
on.
This appliance is not intended to be used by young
children, persons in poor health, or those who are
sensitive to heat.
Close supervision is necessary when the appliance is
being used near children or persons in poor health.
Parents or guardians must preset the controller for
young children, unless the child has been adequately
instructed on how to safely operate the controller.
Electric blankets are not recommended for babies or
young children, as “bed wetting” may occur.
Do not use with a helpless or incapacitated person or
any person suffering from medical illness such as high
blood circulation, diabetes or high skin sensitivity.
Liability
We accept no liability for any damage or personal
injury caused by the misuse of this product and/or
failure to follow these instructions.
•
•
•
•
•
•
•
SAFETY WARNINGS
Client: ALDI AU (OPT)
Project: SEB 1680F
Language: AUS
Date: 04.03.2008
Version: 02
Page: 8 (of 12 pages)
Barcode: 930 5026 16 000 9 00345
8
Done: KV
Check: SP
Done: KV
Check: SP
Parts Guide
1 ControllerController
2 Indicator lamp
3 Controller slide switch
4 Power cord
5 Heating wire
6 Power plug
OPERATION GUIDE
1 3 4 52
6
Client: ALDI AU (OPT)
Project: SEB 1680F
Language: AUS
Date: 04.03.2008
Version: 02
Page: 9 (of 12 pages)
Barcode: 930 5026 16 000 9 00345
9
Done: KV
Check: SP
Before First Use
Place the electric blanket on your mattress. The controller (1)
should be near the head of the bed.
Ensure that the heating wires (5) do not extend under the pillows
or hang over the sides of the mattress.
Smooth any folds or wrinkles.
Secure the electric blanket to the mattress using the fitted skirt.
The power cord (4) and controller (1) must be kept outside the
bedding and away from external heating sources such as heaters
and lamps.
Before using your electric blanket for the first time, it is
recommended that you set the controller (1) on 3 for two hours to
evaporate any moisture in the mattress. Repeat this process every
few months to maintain a dry, healthy bed.
There might occur some odour during first time use. This is normal
due to production residues.
Using the Blanket
Connect the power plug (6) to a suitable outlet.
Ensure the controller (1) is set to 0 before plugging in.
Select the desired heat setting on the controller (1). The indicator
lamp (2) indicates that the electric blanket is on.
The settings on the controller (1) are recommended for use as follows:
0Off: Set to 0 when the heat is no longer required.
1Low heat: gentle heat for all night use.
2Medium heat
3High heat: for preheating only.
0Off: Set to 0 when the heat is no longer required.
Only use the high heat settings to preheat your bed, and then
reduce the heat setting to medium or low heat. Do not sleep with
your blanket on high heat for more than 30 minutes.
It is not recommended that you sleep on any electric blanket whilst
it is still operating. Turn the blanket off before sleeping or when
the heat is no longer required.
•
•
•
•
•
•
•
•
•
•
•
•
•
OPERATION GUIDE
Client: ALDI AU (OPT)
Project: SEB 1680F
Language: AUS
Date: 04.03.2008
Version: 02
Page: 10 (of 12 pages)
Barcode: 930 5026 16 000 9 00345
10
Done: KV
Check: SP
Done: KV
Check: SP
OPERATION GUIDE
Troubleshooting
Should your electric blanket fail to heat, check the following:
Check power connection. The power plug (6) should be inserted
properly in the outlet.
Check that the controller slide switch (3) is in position 1, 2, or 3.
CARE AND CLEANING
Do not dry clean your electric blanket. This may damage the
heating element or controller.
Do not iron, machine wash, or machine dry this blanket.
Always turn the power off and remove the plug before cleaning.
Hand washing
Wash the blanket in lukewarm water with a neutral wool detergent
or mild soapy water solution.
Do not immerse controller, power cord, or plug in any liquid.
Soak for five minutes, remove and gently squeeze the liquid
through the fabric.
Rinse in clean water and then drain excess water from the blanket.
Do not wring.
Spot cleaning
Sponge the affected area with a neutral wool detergent or mild
soap solution mixed with lukewarm water.
Sponge with clean water to remove detergent, and let it completely
dry before using again.
Drying
Drape the blanket over a clothesline to dry.
Do not use pegs on the wired areas.
Do not dry with a hair dryer or heater. Allow the blanket to dry
naturally.
Ensure liquid does not enter the controller; secure it away from
any dripping water.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Client: ALDI AU (OPT)
Project: SEB 1680F
Language: AUS
Date: 04.03.2008
Version: 02
Page: 11 (of 12 pages)
Barcode: 930 5026 16 000 9 00345
11
Done: KV
Check: SP
Storing
When storing the appliance, allow to cool down before folding.
Store your blanket in a safe and dry place when not in use.
Roll or gently fold the blanket and store it in a bag for protection.
Avoid pressing sharp creases into the blanket.
Do not crease the appliance by placing items on top of it during
storage.
Before re-using the blanket after an extended period in storage, a
qualified technician should check the blanket to eliminate the risk
of fire or electric shock.
TECHNICAL DATA
Voltage: 230-240V AC 50Hz
Power Blanket: 1 x 60W
Power Controller: 1 x 60W (attached)
Size: 150cm x 71cm
•
•
•
•
•
CARE AND CLEANING
/
