2. Madison Park
  3. 18118263

Madison Park 18118263, FPF18-0416, MP100-0993 Operating instructions

  • Hello, I'm a chat assistant that has reviewed the provided assembly instructions for the Erika Accent Chair. The document includes a parts list, hardware list and step-by-step instructions to assemble this chair. It also highlights the importance of periodically checking the bolts for safety. I'm ready to answer your questions regarding this document and the assembly process.
  • What is included in the parts list?
    What hardware is needed for assembly?
    What is the recommendation for assembly?
P1
Right Front Feet 1
P2
Left Front Feet 1
P3
Right Back Feet 1
P4
Left Back Feet 1
P5
Chair 1
H1
1
H2
12
H3
12
H4
12
ASSEMBLY INSTRUCTIONS
Description: Erika Accent Chair
Important safety instructions:
●Remove all parts and hardware from box along with any protective packaging.
Allen Wrench
φ5/16"
Flat Washers
φ5/16"
Bolts
φ5/16*2-3/8"
Lock Washers
φ5/16"
●Please read carefully all instructions before assembling.
●For your safety and ease, assembly by two or more adults is recommended.
●Keep instructions for future use.
Pre-assembly:
●Do not discard any content until assembly is completed to avoid accidentally discarding small parts or hardware.
Step 1.Open the zipper bag at the bottom,and take the legs out of the bag.
Step 2. Using bolts (H3), lock washers (H4), flat washers (H2) to connect legs(P1,P2,P3,P4) to chair (P5).
Tighten bolts (H3) with Allen Wrench (H1).
Step 3. Place the chair upright on a level surface.Assemble is complete.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE
THAT ALL HARDWARE IS KEPT TIGHTENED.
Parts List
/