Teletype 2091 User manual

TeleType Co., Inc.

20 Park Plaza Park Plaza

Boston, MA 02116

42.351648 N 71.06832 W

www.teletype.com

Tel: 617-542-6220

ATTACH THE VENT CLIP TO THE AIR CONDITIONER VENT

1. Manually spread the hooks to widest possible position.

2. Insert the clip onto the grill of the air conditioning vent. You will

need to rotate the entire vent clip slightly to obtain the best

position to insert and attach to the vent. See Fig. 1.

3. Adjust the disc closest to the vent to properly secure the clip

to the vent. See Fig. 2.

4. Peel off the adhesive from the smaller triangle (the larger

triangle has already been attached to the clip) and attach the

triangle to your PDA (in the case of the iPAQ, attach to the

Compaq expansion jacket). Slide the PDA onto the vent clip.

See Fig. 3 .

5. Adjust the viewing angle for the PDA by rotating the disc

closest to the PDA.

6. Optional - attach 12v power source to the PDA.

Conf533:C:GPSDOC4-18-02:2091

Fig.3 Slide in, adjust

viewing angle.

Fig.4 Installation finished.

Fig.2 Adjust disc to

tighten.

Fig.1 Rotate and

insert to attach.

TELETYPE GPS PDA POWERED VENT CLIP

Product #2091/#2093

The Vent Clip provides a mechanism for easily mounting and viewing the PDA in your vehicle.