Jeep 2011 Wrangler Unlimited Owner's manual

291680.ps 11JK72-126-AA Chrysler 1" gutter 05/14/2010 06:18:00

Chrysler Group LLC

11JK72-126-AA First Edition Printed in U.S.A.

2011 Wrangler

Wrangler

OWNER’S MANUAL

2011

Wrangler

OWNER’S MANUAL

2011

Chrysler Group LLC

11JK72-126-AA First Edition Printed in U.S.A.

2011 Wrangler

291680.ps 11JK72-126-AA Chrysler 1" gutter 05/14/2010 06:18:00

VEHICLES SOLD IN CANADA

With respect to any Vehicles Sold in Canada, the name

Chrysler Group LLC shall be deemed to be deleted and

the name Chrysler Canada Inc. used in substitution

therefore.

DRIVING AND ALCOHOL

Drunken driving is one of the most frequent causes of

accidents.

Your driving ability can be seriously impaired with blood

alcohol levels far below the legal minimum. If you are

drinking, don’t drive. Ride with a designated non-drinking

driver, call a cab, a friend, or use public transportation.

WARNING!

Driving after drinking can lead to an accident. Your

perceptions are less sharp, your reflexes are slower,

and your judgment is impaired when you have been

drinking. Never drink and then drive.

This manual illustrates and describes the operation of

features and equipment that are either standard or op-

tional on this vehicle. This manual may also include a

description of features and equipment that are no longer

available or were not ordered on this vehicle. Please

disregard any features and equipment described in this

manual that are not on this vehicle.

Chrysler Group LLC reserves the right to make changes

in design and specifications, and/or make additions to or

improvements to its products without imposing any

obligation upon itself to install them on products previ-

ously manufactured.

VEHICLES SOLD IN CANADA

With respect to any Vehicles Sold in Canada, the name

Chrysler Group LLC shall be deemed to be deleted and

the name Chrysler Canada Inc. used in substitution

therefore.

DRIVING AND ALCOHOL

Drunken driving is one of the most frequent causes of

accidents.

Your driving ability can be seriously impaired with blood

alcohol levels far below the legal minimum. If you are

drinking, don’t drive. Ride with a designated non-drinking

driver, call a cab, a friend, or use public transportation.

WARNING!

Driving after drinking can lead to an accident. Your

perceptions are less sharp, your reflexes are slower,

and your judgment is impaired when you have been

drinking. Never drink and then drive.

This manual illustrates and describes the operation of

features and equipment that are either standard or op-

tional on this vehicle. This manual may also include a

description of features and equipment that are no longer

available or were not ordered on this vehicle. Please

disregard any features and equipment described in this

manual that are not on this vehicle.

Chrysler Group LLC reserves the right to make changes

in design and specifications, and/or make additions to or

improvements to its products without imposing any

obligation upon itself to install them on products previ-

ously manufactured.

INSTALLATION OF RADIO TRANSMITTING

EQUIPMENT

Special design considerations are incorporated into this

vehicle’s electronic system to provide immunity to radio

frequency signals. Mobile two-way radios and telephone

equipment must be installed properly by trained person-

nel. The following must be observed during installation.

The positive power connection should be made directly

to the battery and fused as close to the battery as possible.

The negative power connection should be made to body

sheet metal adjacent to the negative battery connection.

This connection should not be fused.

Antennas for two-way radios should be mounted on the

roof or the rear area of the vehicle. Care should be used

in mounting antennas with magnet bases. Magnets may

affect the accuracy or operation of the compass on

vehicles so equipped.

The antenna cable should be as short as practical and

routed away from the vehicle wiring when possible. Use

only fully shielded coaxial cable.

Carefully match the antenna and cable to the radio to

ensure a low Standing Wave Ratio (SWR).

Mobile radio equipment with output power greater than

normal may require special precautions.

All installations should be checked for possible interfer-

ence between the communications equipment and the

vehicle’s electronic systems.

INSTALLATION OF RADIO TRANSMITTING

EQUIPMENT

Special design considerations are incorporated into this

vehicle’s electronic system to provide immunity to radio

frequency signals. Mobile two-way radios and telephone

equipment must be installed properly by trained person-

nel. The following must be observed during installation.

The positive power connection should be made directly

to the battery and fused as close to the battery as possible.

The negative power connection should be made to body

sheet metal adjacent to the negative battery connection.

This connection should not be fused.

Antennas for two-way radios should be mounted on the

roof or the rear area of the vehicle. Care should be used

in mounting antennas with magnet bases. Magnets may

affect the accuracy or operation of the compass on

vehicles so equipped.

The antenna cable should be as short as practical and

routed away from the vehicle wiring when possible. Use

only fully shielded coaxial cable.

Carefully match the antenna and cable to the radio to

ensure a low Standing Wave Ratio (SWR).

Mobile radio equipment with output power greater than

normal may require special precautions.

All installations should be checked for possible interfer-

ence between the communications equipment and the

vehicle’s electronic systems.

TABLE OF CONTENTS

SECTION PAGE

1

INTRODUCTION

............................................................3

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

.............................11

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

............................. 91

4

UNDERSTANDING YOUR INSTRUMENT PANEL

..................................261

5

STARTING AND OPERATING

................................................365

6

WHAT TO DO IN EMERGENCIES

............................................. 483

7

MAINTAINING YOUR VEHICLE

..............................................503

8

MAINTENANCE SCHEDULES

.................................................553

9

IF YOU NEED CONSUMER ASSISTANCE

........................................ 571

10

INDEX

...................................................................581

1

2

3

4

5

6

7

8

9

10

INTRODUCTION

CONTENTS

䡵 Introduction ........................... 4

䡵 Rollover Warning ....................... 5

䡵 How To Use This Manual .................. 6

䡵 Warnings And Cautions ................... 8

䡵 Vehicle Identification Number .............. 8

䡵 Vehicle Modifications/Alterations ............ 9

1

INTRODUCTION

Congratulations on selecting your new Chrysler Group

LLC vehicle. Be assured that it represents precision

workmanship, distinctive styling, and high quality - all

essentials that are traditional to our vehicles.

This is a specialized utility vehicle. It can go places and

perform tasks that conventional passenger cars are not

intended. It handles and maneuvers differently from

many passenger cars both on-road and off-road, so take

time to become familiar with your vehicle.

The two-wheel drive version of this vehicle was designed

for on-road use only. It is not intended for off-road

driving or use in other severe conditions suited for a

four-wheel drive vehicle.

Before you start to drive this vehicle, read the Owner’s

Manual. Be sure you are familiar with all vehicle controls,

particularly those used for braking, steering, transmis-

sion, and transfer case shifting. Learn how your vehicle

handles on different road surfaces. Your driving skills

will improve with experience. When driving off-road or

working the vehicle, don’t overload the vehicle or expect

the vehicle to overcome the natural laws of physics.

Always observe federal, state, provincial and local laws

wherever you drive.

As with other vehicles of this type, failure to operate this

vehicle correctly may result in loss of control or a

collision. Refer to “On-Road/Off-Road Driving Tips” in

“Starting And Operating” for further information.

This Owner’s Manual has been prepared with the assis-

tance of service and engineering specialists to acquaint

you with the operation and maintenance of your vehicle.

It is supplemented by Warranty Information, and various

customer-oriented documents. Please take the time to

read these publications carefully. Following the instruc-

tions and recommendations in this manual will help

assure safe and enjoyable operation of your vehicle.

4 INTRODUCTION

NOTE: After reviewing the owner information, it

should be stored in the vehicle for convenient referenc-

ing and remain with the vehicle when sold.

When it comes to service, remember that your authorized

dealer knows your vehicle best, has factory-trained tech-

nicians and genuine MOPAR威 parts, and cares about

your satisfaction.

ROLLOVER WARNING

Utility vehicles have a significantly higher rollover rate

than other types of vehicles. This vehicle has a higher

ground clearance and a higher center of gravity than

many passenger cars. It is capable of performing better in

a wide variety of off-road applications. Driven in an

unsafe manner, all vehicles can go out of control. Because

of the higher center of gravity and the narrower track, if

this vehicle is out of control it may roll over when some

other vehicles may not.

Do not attempt sharp turns, abrupt maneuvers, or other

unsafe driving actions that can cause loss of vehicle

control. Failure to operate this vehicle safely may result

in a collision, rollover of the vehicle, and severe or fatal

injury. Drive carefully.

Rollover Warning Label

1

INTRODUCTION 5

Failure to use the driver and passenger seat belts pro-

vided is a major cause of severe or fatal injury. In a

rollover crash, an unbelted person is significantly more

likely to die than a person wearing a seat belt. Always

buckle up.

HOW TO USE THIS MANUAL

Consult the Table of Contents to determine which section

contains the information you desire.

Since the specification of your vehicle depends on the

items of equipment ordered, certain descriptions and

illustrations may differ from your vehicle’s equipment

The detailed index at the back of this Owner’s Manual

contains a complete listing of all subjects.

Consult the following table for a description of the

symbols that may be used on your vehicle or throughout

this Owner’s Manual:

6 INTRODUCTION

INTRODUCTION 7

WARNINGS AND CAUTIONS

This Owner’s Manual contains WARNINGS against op-

erating procedures that could result in a collision or

bodily injury. It also contains CAUTIONS against proce-

dures that could result in damage to your vehicle. If you

do not read this entire manual, you may miss important

information. Observe all Warnings and Cautions.

VEHICLE IDENTIFICATION NUMBER

The Vehicle Identification Number (VIN) is found on the

left front corner of the instrument panel pad, visible from

outside of the vehicle through the windshield. This

number also appears on the Automobile Information

Disclosure Label affixed to a window on your vehicle.

Save this label for a convenient record of your vehicle

identification number and optional equipment.

NOTE: It is illegal to remove or alter the VIN plate.

8 INTRODUCTION

VEHICLE MODIFICATIONS/ALTERATIONS

WARNING!

Any modifications or alterations to this vehicle could

seriously affect its roadworthiness and safety and

may lead to a accident resulting in serious injury or

death.

1

INTRODUCTION 9

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

CONTENTS

䡵 A Word About Your Keys ................. 14

▫ Ignition Key Removal .................. 14

▫ Key-In-Ignition Reminder ............... 15

䡵 Sentry Key威 .......................... 15

▫ Replacement Keys ..................... 16

▫ Customer Key Programming ............. 17

▫ General Information ................... 18

䡵 Vehicle Security Alarm — If Equipped ........ 18

▫ Rearming The System .................. 19

▫ To Arm The System ................... 19

▫ To Disarm The System ................. 19

䡵 Illuminated Entry — If Equipped ........... 20

䡵 Remote Keyless Entry (RKE) — If Equipped . . . 21

▫ To Unlock The Doors And Swing Gate ...... 22

▫ To Lock The Doors And Swing Gate ........ 23

▫ Using The Panic Alarm ................. 23

▫ To Turn Off “Flash Lights With Lock” ....... 23

▫ Programming Additional Transmitters ...... 24

2

▫ General Information ................... 24

▫ Transmitter Battery Replacement .......... 25

䡵 Remote Starting System — If Equipped ....... 26

▫ How To Use Remote Start ............... 26

䡵 Doors ............................... 29

▫ Upper Half Door Window Removal —

If Equipped ......................... 29

▫ Upper Half Door Window Installation —

If Equipped ......................... 29

▫ Front Door Removal ................... 30

▫ Rear Door Removal (Four-Door Models) ..... 31

䡵 Door Locks ........................... 34

▫ Manual Door Locks ................... 34

▫ Power Door Locks — If Equipped ......... 34

▫ Child-Protection Door Lock System —

Rear Doors .......................... 38

䡵 Windows ............................ 40

▫ Power Windows — If Equipped ........... 40

▫ Wind Buffeting ....................... 42

䡵 Rear Swing Gate ....................... 42

䡵 Occupant Restraints ..................... 43

▫ Lap/Shoulder Belts .................... 47

▫ Rear Center Lap/Shoulder Belt Retractor

Lockout — Four-Door Models Only ........ 52

▫ Lap/Shoulder Belt Untwisting Procedure .... 52

▫ Adjustable Upper Shoulder Belt Anchorage . . . 53

▫ Seat Belts In Passenger Seating Positions ..... 54

12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

▫ Automatic Locking Retractor Mode (ALR) —

If Equipped ......................... 55

▫ Energy Management Feature ............. 56

▫ Seat Belt Pretensioners ................. 56

▫ Enhanced Seat Belt Use Reminder System

(BeltAlert威) ......................... 57

▫ Seat Belts And Pregnant Women .......... 58

▫ Seat Belt Extender ..................... 58

▫ Supplemental Restraint System (SRS) — Air

Bags .............................. 59

▫ Air Bag Deployment Sensors And Controls . . . 63

▫ Event Data Recorder (EDR) .............. 70

▫ Child Restraints ...................... 71

䡵 Engine Break-In Recommendations .......... 85

䡵 Safety Tips ........................... 85

▫ Transporting Passengers ................ 85

▫ Exhaust Gas ......................... 86

▫ Safety Checks You Should Make Inside The

Vehicle ............................. 87

▫ Periodic Safety Checks You Should Make

Outside The Vehicle ................... 89

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13

A WORD ABOUT YOUR KEYS

The keys for your new vehicle are enclosed in a plastic

bag with the key code number on it. If you received your

keys without the bag, ask your authorized dealer to give

you the number. The key code can also be obtained by

your authorized dealer from your vehicle invoice.

Ignition Key Removal

1. Place the shift lever in PARK (if equipped with an

automatic transmission).

2. Turn the ignition switch to the ACC (ACCESSORY)

position.

3. Push the ignition key inward.

4. Turn the ignition key to the LOCK position, and

remove the key.

Ignition Switch Positions

1 — LOCK 3 — ON/RUN

2 — ACC (ACCESSORY) 4 — START

14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

WARNING!

Leaving unattended children in a vehicle is danger-

ous for a number of reasons. A child or others could

be injured. Children should be warned not to touch

the parking brake, brake pedal, or the shift lever. Do

not leave the key in the ignition. A child could

operate power windows, other controls, or move the

vehicle.

CAUTION!

An unlocked vehicle is an invitation to thieves.

Always remove the key from the ignition, and lock

all doors when leaving the vehicle unattended.

Key-In-Ignition Reminder

Opening the driver’s door when the key is in the ignition

sounds a signal to remind you to remove the key.

NOTE:

The Key-In-Ignition reminder only sounds when

the ignition key is placed in the LOCK or ACC position.

SENTRY KEY姞

The Sentry Key威 Immobilizer System prevents unauthor-

ized vehicle operation by disabling the engine. The

system does not need to be armed or activated. Operation

is automatic, regardless of whether the vehicle is locked

or unlocked.

The system uses ignition keys that have an embedded

electronic chip (transponder) to prevent unauthorized

vehicle operation. Therefore, only keys that are pro-

grammed to the vehicle can be used to start and operate

the vehicle. The system will shut the engine off in two

seconds if someone uses an invalid key to try to start the

engine.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15

NOTE: A key that has not been programmed is also

considered an invalid key, even if it is cut to fit the

ignition switch lock cylinder for that vehicle.

During normal operation, after turning on the ignition

switch, the Vehicle Security Light will turn on for three

seconds for a bulb check. If the light remains on after the

bulb check, it indicates that there is a problem with the

electronics. In addition, if the Vehicle Security Light

begins to flash after the bulb check, it indicates that

someone used an invalid key to try to start the engine.

Either of these conditions will result in the engine being

shut off after two seconds.

If the Vehicle Security Light turns on during normal

vehicle operation (vehicle running for longer than 10 sec-

onds), it indicates that there is a fault in the electronics.

Should this occur, have the vehicle serviced as soon as

possible by an authorized dealer.

CAUTION!

The Sentry Key威 Immobilizer system is not compat-

ible with some after-market remote starting systems.

Use of these systems may result in vehicle starting

problems and loss of security protection.

All of the keys provided with your new vehicle have

been programmed to the vehicle electronics.

Replacement Keys

NOTE: Only keys that are programmed to the vehicle

electronics can be used to start and operate the vehicle.

Once a Sentry Key威 is programmed to a vehicle, it cannot

be programmed to any other vehicle.

16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

CAUTION!

Always remove the Sentry Keys威 from the vehicle

and lock all doors when leaving the vehicle unat-

tended.

At the time of purchase, the original owner is provided

with a four-digit Personal Identification Number (PIN).

Keep the PIN in a secure location. This number is

required for authorized dealer replacement of keys. Du-

plication of keys may be performed at an authorized

dealer or by following the customer key programming

procedure. This procedure consists of programming a

blank key to the vehicle electronics. A blank key is one

that has never been programmed.

NOTE: When having the Sentry Key威 Immobilizer

System serviced, bring all vehicle keys with you to an

authorized dealer.

Customer Key Programming

If you have two valid Sentry Keys威, you can program

new Sentry Keys威 to the system by performing the

following procedure:

1. Cut the additional Sentry Key威 Transponder blank(s)

to match the ignition switch lock cylinder key code.

2. Insert the first valid key into the ignition switch. Turn

the ignition switch to the ON/RUN position for at least

three seconds, but no longer than 15 seconds. Then, turn

the ignition switch to the LOCK position and remove the

first key.

3. Insert the second valid key into the ignition switch.

Turn the ignition switch to the ON/RUN position within

15 seconds. After 10 seconds, a chime will sound. In

addition, the Vehicle Security Light will begin to flash.

Turn the ignition switch to the LOCK position and

remove the second key.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17

4. Insert a blank Sentry Key威 into the ignition switch.

Turn the ignition switch to the ON/RUN position within

60 seconds. After 10 seconds, a single chime will sound.

In addition, the Vehicle Security Light will stop flashing.

To indicate that programming is complete, the Vehicle

Security Light will turn on again for three seconds and

then turn off.

The new Sentry Key威 is programmed. The Remote

Keyless Entry (RKE) transmitter will also be pro-

grammed during this procedure.

Repeat this procedure to program up to eight keys. If you

do not have a programmed Sentry Key威, contact your

authorized dealer for details.

NOTE: If a programmed key is lost, see your authorized

dealer to have all remaining keys erased from the sys-

tem’s memory. This will prevent the lost key from

starting your vehicle. The remaining keys must then be

reprogrammed. All vehicle keys must be taken to an

authorized dealer at the time of service to be

reprogrammed.

General Information

The Sentry Key威 system complies with FCC rules Part 15

and with RSS-210 of Industry Canada. Operation is

subject to the following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference that may be

received, including interference that may cause unde-

sired operation.

VEHICLE SECURITY ALARM — IF EQUIPPED

The Vehicle Security Alarm monitors the vehicle doors,

swing gate, and ignition for unauthorized operation.

While the Vehicle Security Alarm is armed, interior

switches for door locks are disabled. The Vehicle Security

Alarm provides both audible and visible signals when

18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Page is loading ...

Jeep 2011 Wrangler Unlimited Owner's manual

This manual is also suitable for

Jeep 2011 Wrangler Unlimited Owner's manual

Related papers

Other documents