2. Fibaro
  3. FGWP-102
FGWP-102

Fibaro FGWP-102, FGWPE-102 | FGWPF-102 User guide

  • Hello! I am an AI chatbot trained to assist you with the Fibaro FGWP-102 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How can I connect to tech support?
    What are the functional features of the Wall Plug?
    How do I add the Wall Plug to the Home Center?
    What does a red LED ring indicate?
    How do I test the network range?
    What does a limited communication range indicate?
    Where can I find the Wall Plug data?
INSTRUCTION MANUAL
FIBARO SYSTEM
WALL PLUG
Technical support
Should youneed any assistance in connecting or configuring your Home Center, please use our guides
and technical presentations which can be found on our website:
http://www.baro.com/en/support
Power consumption
metering
Energy consumption
history
Functional features
Controlled remotely Z-Wave network
tester
Download FIBARO app for smartphone
Your Wall Plug is ready to be added
to the Home Center.
Wall Plugmust be in range of the Home Center because it requires
a direct communication with the controller.
Start inclusion mode
Go to Settings.
STEP 1
STEP 3
STEP 2
Start inclusion mode
Press “Next”.
Press “add device”.
Inclusion mode has been launched
Add your device
Insert the device
in the power outlet.
STEP 4
Once the Plug is turned on,
the LED ring will glow red.
It is recommended to use the socket located possibly the closest
from the Home Center.
Processing your congurations
Name the device and
assign it to the room.
STEP 5
The device has been added
Insert the device
in the power outlet.
STEP 6
Installation
If the LED ring glows green, it means
that the device has been added
successfully to the Home Center.
If the LED ring glows red, it means that the
device has not been added successfully
to the Home Center. System configuration
needs to be repeated.
Network range test
It is recommended to check if the device’s destination
is in range of your Home Center.
STEP 7
Hold the button for a few
seconds until LED ring
blinks violet.
STEP 8
Release the button,
and press it again.
Network range test will be activated.
LED ring will indicate the quality
of the network range.
Press the button in order
to leave testing mode.
STEP 9
Direct
communication
Routed
communication
Limited
communication
No signal! The device
will not work correctly!
Network range test – quality indicator
Wall Plug data available in the energy
usage overview panel.
The energy usage panel is available in FIBARO app for tablet, PC and MAC.
www.fibaro.com
/