![](//vs1.manuzoid.com/store/data-gzf/b027418d42a1bed152a1a46af021d0d4/2/001105417.htmlex.zip/bg2.jpg)
Manual # 650645
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
2. Attach the provided 36” CAT5 cable to the back of the VHX system and route the other end through
an existing opening in rear of the dash to the control box mounting location. Be careful to not pinch
the CAT5 cable.
4. Refer to the main manual for wiring
instructions to complete the VHX
installation.
3. Place the VHX system into the dash
and secure the system using hardware
from disassembly.