Eiki LC-SXG400L User manual

MULTIMEDIA PROJECTOR

MODEL LC-SXG400

LC-SXG400L

✽

OWNER’S MANUAL

✽ Projection lens is optional.

2

◆ Compact Design

This projector is designed compact in size and

weight. It is easy to carry and installed anywhere you

wish to use.

◆ Functionally Rich

This projector has many useful functions such as lens

shifting, ceiling and rear projection, perpendicular

omnidirectional projection, variety of lens options,

etc.

◆ Multi-use Remote Control

Use the remote control as wired and wireless, or as a

PC wireless mouse. Eight remote control codes and

selectable pointer shapes are also available.

◆ Simple Computer System Setting

The projector has the Multi-scan system to conform

to almost all computer output signals quickly (p.37).

Up to UXGA resolution can be accepted.

◆ Useful Functions for Presentation

Digital zoom function allows you to focus on the

crucial information during a presentation (pp.15, 47).

◆ Security Function

The Security function helps you to ensure security of

the projector. With the Key lock function, you can lock

the operation on the top control or remote control

(p.54). PIN code lock functions prevents unauthorized

use of the projector (pp.54–56).

◆ Lamp Control

Brightness of the projection lamp can be selected

(p.49).

◆

Power Management

The Power management function reduces power

consumption and maintains lamp life (p.53).

◆ Multilanguage Menu Display

Operation menu is available in 12 languages; English,

German, French, Italian, Spanish, Portuguese, Dutch,

Swedish, Russian, Chinese, Korean, and Japanese

(p.49).

◆ Network-capable

Through an optional Pj-to NetDirector, you can

operate and control the projector.

◆ Logo Function

The Logo function allows you to customize the

screen logo (pp.50-51). You can capture an image for

the screen logo and use it for the starting-up display

or between presentations.

◆

Helpful Maintenance Functions

Lamp and filter maintenance functions provide for

better and proper maintenance of the projector.

◆

Multiple Interface Terminals

The projector has several interface terminals that

can support various types of equipment and signals

(pp.11–12).

✔Note:

 •TheOn-ScreenMenuandfiguresinthismanualmaydifferslightlyfromtheproduct.

 •Thecontentsofthismanualaresubjecttochangewithoutnotice.

Features and Design

3

Trademarks

Each name of corporations or products in this book is either a registered trademark or a trademark of its respective

corporation.

Features and Design................ 2

Table of Contents .................. 3

To the Owner ..................... 4

Safety Instructions ................. 5

Air Circulation 6

Installing the Projector in Proper Directions 7

Positioning Precautions 7

Moving the Projector 8

Cautions in Handling the Projector 8

Compliance ....................... 9

Part Names and Functions.......... 10

Front 10

Back 10

Bottom 10

Rear Terminal 11

Top Control 13

Remote Control 14

Remote Control Battery Installation 16

Remote Control Receivers and Operating Range 16

Adjustable Feet 16

Remote Control Code 17

Installation ...................... 18

Positioning the Projector 18

Moving the Lens 18

Lens Installation 19

Connecting to a Computer (Digital and Analog RGB) 20

Connecting to Video Equipment (Video, S-Video) 21

Connecting to Video Equipment (Component and

RGB Scart) 22

Connecting the AC Power Cord 23

Basic Operation .................. 24

Turning On the Projector 24

Turning Off the Projector 25

How to Operate the On-Screen Menu 26

Menu Bar 27

Operating with Projector Control 28

Sound Adjustment 29

Operating with Remote Control 30

Laser Pointer Function 32

Pointer Function 32

Wireless Mouse Operation 33

Input Selection ................... 34

Input 34

Input Source Selection 35

Video System Selection 36

Computer Adjustment ............. 37

Computer System Selection 37

Auto PC Adjustment 38

Manual PC Adjustment 39

Image Level Selection ............. 41

Image Level Selection 41

Image Adjustment ................ 42

Image Adjustment 42

Screen Adjustment ................ 45

Screen Adjustment 45

Screen Size Adjustment (Computer Signals) 46

Screen Size Adjustment

(Video, Component Signals) 48

Setting .......................... 49

Setting 49

Maintenance and Filter Cleaning .... 58

Cleaning the Filter 58

Resetting the Filter Counter 58

Lamp Replacement 59

Resetting the Lamp Counter 60

Warning Indicators 61

Cleaning the Projection Lens 62

Cleaning the Projector Cabinet 62

Appendix ........................ 63

Troubleshooting 63

Menu Tree 66

Indicators and Projector Condition 68

Compatible Computer Specifications 70

Technical Specifications 72

Optional Parts 73

PJ Link Notice 74

Configurations of Terminals 75

PIN Code Number Memo 76

Dimensions 77

Table of Contents

4

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE EXCEPT

LAMP REPLACEMENT. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS

VOLTAGE CONSTITUTING A RISK OF ELECTRIC

SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE

IMPORTANT OPERATING AND MAINTENANCE

INSTRUCTIONS IN THE OWNER'S MANUAL

WITH THIS UNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before installing and operating the projector, read this

manual thoroughly.

The projector provides many convenient features and

functions. Operating the projector properly enables

you to manage those features and maintains it in good

condition for many years to come.

Improper operation may result in not only shortening

the product life, but also malfunctions, fire hazard, or

other accidents.

If your projector seems to operate improperly, read this

manual again, check operations and cable connections

and try the solutions in the “Troubleshooting” section

in the back of this manual. If the problem still persists,

contact the dealer where you purchased the projector

or the service center.

Safety Precaution

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

– This projector produces intense light from the projection

lens. Do not stare directly into the lens as much as

possible, otherwise eye damage could result. Be

especially careful that children do not stare directly into

the beam.

– Install the projector in a proper position. Otherwise it

may result in fire hazard.

– Allowing the proper amount of space on the top, sides,

and rear of the projector cabinet is critical for proper

air circulation and cooling of the unit. The dimension

shown here indicate the minimum space required.

If the projector is to be built into a compartment or

similarly enclosed, these minimum distances must be

maintained.

– Do not cover the ventilation slot on the projector. Heat

build-up can reduce the service life of your projector,

and can also be dangerous.

– If the projector is unused for an extended time, unplug

the projector from the power outlet.

0.7' (20 cm)

1.5' (50 cm)

3' (1 m)

1.5' (50 cm)

SIDE and TOP REAR

CAUTION

Not for use in a computer room as defined in the

Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle

que définie dans la norme ANSI/NFPA 75 Standard for

Protection of Electronic Computer/Data Processing

Equipment

NOTE: This symbol and recycle system are applied only to EU

countries and not applied to the countries in the other

area of the world.

Your EIKI product is designed and

manufactured with high quality materials

and components which can be recycled

and reused.

This symbol means that electrical and

electronic equipment, at their end-of-life,

should be disposed of separately from

your household waste.

Please dispose of this equipment at your

local community waste collection/recycling centre.

In the European Union there are separate collection

systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

CAUTION ON HANGING FROM THE CEILING

When hanging the projector from the

ceiling, clean air intake vents, filters, or

top of the projector periodically with a

vacuum cleaner. If you leave the projector

unclean for a long time, the cooling fans

can be clogged with dust, and it may

cause a breakdown or a disaster.

DO NOT SET THE PROJECTOR IN

GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A

KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER.

IF THE PROJECTOR COMES IN CONTACT WITH OIL OR

CHEMICALS, IT MAY BECOME DETERIORATED.

READ AND KEEP THIS OWNER'S MANUAL FOR

LATER USE.

To the Owner

5

All the safety and operating instructions should be read

before the product is operated.

Read all of the instructions given here and retain them

for later use. Unplug this projector from AC power supply

before cleaning. Do not use liquid or aerosol cleaners. Use

a damp cloth for cleaning.

Follow all warnings and instructions marked on the

projector.

For added protection to the projector during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet. This will

prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the

manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand,

or table. The projector may fall, causing serious injury

to a child or adult, and serious damage to the projector.

Use only with a cart or stand recommended by the

manufacturer, or sold with the projector. Wall or shelf

mounting should follow the manufacturer’s instructions,

and should use a mounting kit approved by the

manufacturers.

An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

Slots and openings in the side and bottom of the cabinet

are provided for ventilation, to ensure reliable operation of

the equipment and to protect it from overheating.

The openings should never be covered with cloth or other

materials, and the bottom opening should not be blocked

by placing the projector on a bed, sofa, rug, or other

similar surface. This projector should never be placed near

or over a radiator or heat register.

This projector should not be placed in a built-in installation

such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through

cabinet slots as they may touch dangerous voltage points

or short out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of air-

conditioning equipment.

This projector should be operated only from the type

of power source indicated on the marking label. If you

are not sure of the type of power supplied, consult your

authorized dealer or local power company.

Do not overload wall outlets and extension cords as this

can result in fire or electric shock. Do not allow anything

to rest on the power cord. Do not locate this projector

where the cord may be damaged by persons walking on

it.

Do not attempt to service this projector yourself

as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

Unplug this projector from wall outlet and refer servicing

to qualified service personnel under the following

conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the projector to normal

operation.

e. If the projector has been dropped or the cabinet has

been damaged.

f. When the projector exhibits a distinct change in

performance-this indicates a need for service.

When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer that have the same characteristics as the

original part. Unauthorized substitutions may result in fire,

electric shock, or injury to persons.

Upon completion of any service or repairs to this

projector, ask the service technician to perform routine

safety checks to determine that the projector is in safe

operating condition.

Safety Instructions

NOTE FOR CUSTOMERS IN THE US

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY

AND MUST BE RECYCLED OR DISPOSED OF ACCORDING

TO LOCAL, STATE OR FEDERAL LAWS.

6

Openings in the cabinet are provided for ventilation.

To ensure reliable operation of the product and to

protect it from overheating, these openings must not

be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When

using or installing the projector, the following

precautions should be taken.

– Do not put any flammable object or spray can near

the projector, hot air is exhausted from the air

vents.

– Keep the exhaust vent at least 3’ (1 m) away from

any objects.

– Do not touch peripheral parts of the exhaust vent,

especially screws and metallic parts. These areas

will become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on

the cabinet will not only get damaged but also may

cause fire hazard by heat.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the

temperature inside the projector.

Air Circulation

Exhaust Vent

(Hot air exhaust)

Air Intake Vent

Air flow

The projector uses a lamp which generates significant

heat. The cooling fans and air vents are provided to

dissipate the heat by drawing air into the housing and

the filter is located in the intake vents to prevent dust

from getting inside of the projector.

In order to care for the projector appropriately, regular

cleaning is required. Remove any dirt or dust that has

accumulated on the projector and on or in the filter.

If the projector detects that the filter is clogged, a

“Filter warning” icon (red) will appear on the screen

and “WARNING FILTER” indicator on the top panel

will blink (see below). Stop using the projector

immediately and clean or replace the filter.

Blocking the air vents and leaving the projector

uncleaned for a long time may not only damage the

projector and may require costly repairs but may also

cause accidents or fire.

For maintenance of the filter, refer to “Filter counter”

on page 57 and “Maintenance and Filter Cleaning” on

page 58.

Damages to the projector caused by using an

uncleaned filter or improper maintenance will void

the warranty on the projector.

IMPORTANT!

Clean the Filter Regularly!!

Filter warning icon (red) appears on the screen

when the projector detects filter clogging.

Top Control

WARNING FILTER

indicator

Safety Instructions

7

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in

severe accident or fire hazard.

This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the

horizontal plane. When installing the projector in upwardly inclined position, install the projector bottom side up.

Installing the Projector in Proper Directions

✔Note:

 •Whentheimageistop/bottomandleft/rightreversed,settheceilingfunctionto“On.”(p.45)

Avoid positioning the projector as described below when installing.

Positioning Precautions

Do not tilt the projector more than

10 degrees from side to side.

Do not put the projector on either

side to project an image.

10˚

10˚10˚

10˚

In upward projection, do

not tilt the projector over 10

degrees right and left.

In downward projection, do

not tilt the projector over 10

degrees right and left.

For ceiling mounting, you need the ceiling mount kit designed for this

projector. When not mounted properly, the projector may fall, causing

hazards or injury. For details, consult your dealer. The warranty on

this projector does not cover any damage caused by use of any non-

recommended ceiling mount kit or installation of the ceiling mount kit in an

improper location.

CAUTION ON CEILING MOUNTING

Safety Instructions

8

Use the hand grip when moving the projector.

Replace the lens cap and retract the adjustable feet to

prevent damage to the lens and cabinet when carrying.

When the projector is not in use for an extended period, put

it into a suitable case to protect the projector.

CAUTION IN CARRYING OR

TRANSPORTING THE PROJECTOR

– Do not drop or bump the projector, otherwise damages

or malfunctions may result.

– When carrying the projector, use a suitable carrying

case.

– Do not transport the projector by courier or any other

transport service in an unsuitable transport case. This

may cause damage to the projector. For information

about transporting the projector by courier or any other

transport service, consult your dealer.

– Do not put the projector in a case before it is cooled

enough.

Cautions in Handling the Projector

Do not hold the lens when lifting or moving the projector.

Doing so may cause damage to the lens and the projector.

Care must be taken when handling the projector; do not

drop, bump, subject it to strong forces, or put other things

on the cabinet.

Do not hold the lens and the peripheral part.

CAUTION

Projection lens is a motorized lens. Please note the

followings when using the projector.

● Do not touch the lens while it is moving as this

could cause injury to the fingers.

● Never allow children to touch the lens.

Moving the Projector

Safety Instructions

9

AC Power Cord for the United Kingdom:

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the

plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus

A S A

. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required,

ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available

from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it

should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.

WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET

OUTLET.

The Wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow ············ Earth

Blue ································· Neutral

Brown ······························ Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying

the terminals in your plug proceed as follows:

The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E

or by the safety earth symbol

or coloured green or green-and-yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

WARNING: THIS APPARATUS MUST BE EARTHED.

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories

(UL) and certified by the Canadian Standard Association (CSA).

AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug

will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert

the plug into the outlet, contact your electrician.

GROUND

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

AC Power Cord Requirement

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes

or modifications should be made, you could be required to stop operation of the equipment.

Model Number(s) :

LC-SXG400, LC-SXG400L

Trade Name : EIKI

Responsible party : EIKI International, Inc.

Address :

30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A.

Telephone No. : 800-242-3454 (949-457-0200)

Compliance

10

Part Names and Functions

Bottom

Back

qFilter

wSpeaker

e Lens Release Button

rTop Controls and Indicators

t Maintenance Cover

WARNING: FOR MAINTENANCE USE

ONLY. DO NOT OPEN.

yLens Cap (for LC-SXG400)

!7

!4 !6!5

!2

!3

CAUTION

Hot air is exhausted from the exhaust vent.

Do not put heat-sensitive objects near this

side.

u

e

r t

y

Front

!0

o

q w

i

✽

o

!1Infrared Remote Receiver (Back)

!2 Terminals and Connectors

!3 Lamp Cover

!4 Power Cord Connector

!5 Optional Parts Attachment

!6 Air Intake Vent

!7Hand Grip

CAUTION

Do not turn on the projector with the lens

cap attached. High temperature from light

beam may damage the lens cap and result

in fire hazard.

u Infrared Remote Receiver (Front)

i Projection Lens (for LC-SXG400)

o Adjustable Feet

!0 Exhaust Vent

✽ Kensington Security Slot

This slot is for a Kensington lock used to deter

theft of the projector.

*Kensington is a registered trademark of ACCO Brand

Corporation.

!1

11

Rear Terminal

tUSB CONNECTOR (Series B)

Use this connector when controlling a computer

with the remote control of the projector. Connect

the USB terminal of your computer to this

connector with the supplied USB cable (p.20).

yS-VIDEO INPUT JACK

Connect the S-VIDEO output signal from video

equipment to this jack (p.21).

iAUDIO 2 JACK

Connect the audio output (stereo) signal from a

computer or video equipment connected to q to

this jack (pp.20–22).

oAUDIO 1 JACK

Connect the audio output (stereo) signal from a

computer or video equipment connected to w or

e to this jack (pp.20, 22).

rVIDEO INPUT JACK

Connect the composite video output signal from

video equipment to this jack (p.21).

uAUDIO 3 JACKS (L(MONO)/R)

Connect the audio output signal from video

equipment connected to r or yto these jacks

(p.21). For a mono audio signal (a single audio jack),

connect it to the L (MONO) jack.

q5 BNC INPUT JACKS

Connect the component or composite video output

signal from video equipment to VIDEO/Y, Cb/Pb,

and Cr/Pr jacks or connect the computer output

signal (5 BNC Type [Green, Blue, Red, Horiz. Sync,

and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.20–

22).

wCOMPUTER INPUT TERMINAL (ANALOG)

Connect the computer (or RGB scart) output signal

to this terminal (pp.20, 22).

eCOMPUTER INPUT TERMINAL (DIGITAL)

Connect the computer output signal (Digital DVI-D

type) to this terminal. The HD (HDCP compatible)

signal can also be connected (pp.20, 22).

Part Names and Functions

q w e

r

t

yi uo

12

!0R/C JACK

When using the wired remote control, connect the

wired remote control to this jack with a remote

control cable (supplied).

!2MONITOR OUTPUT TERMINAL (ANALOG)

This terminal outputs the video signal from

computer to external video equipment (p.20).

✽ RESET button

A built-in micro processor which controls this unit

may occasionally malfunction and need to be reset.

This can be done by pressing the RESET button

with a pen, which will shut down and restart the

unit. Do not use the RESET function excessively.

Rear Terminal

!1AUDIO MONITOR OUTPUT JACK (VARIABLE)

This jack outputs the audio signal from computer

or video equipment to external audio equipment

(pp.20–22).

!3CONTROL PORT CONNECTOR

When controlling the projector from a computer,

connect the computer to this connector with a

control cable (supplied).

!4INFRARED REMOTE RECEIVER (Back)

The infrared remote receiver is also located in the

front (pp.10, 16).

Part Names and Functions

!0!1!2!3!4

✽

13

q

w

e

t

u

i

o

wLAMP REPLACE indicator

Lights yellow when the projection lamp reaches its

end of life (pp.59, 69).

qWARNING TEMP. indicator

Blinks red when the internal temperature of the

projector exceeds the operating range (pp.61, 68).

eON/STAND-BY button

Turn the projector on or off (pp.24–25).

rINPUT button

Select an input source (pp.34–35).

!1INFO. button

Display the input source information (p.28).

yPOINT ed7 8 (VOLUME +/–) buttons

– Select an item or adjust the value in the On-

Screen Menu (p.26).

– Pan the image in Digital zoom + mode (p.47).

– Adjust the volume level (Point 7 8 buttons)

(p.29).

uSELECT button

– Execute the selected item (p.26).

– Expand or compress the image in the Digital zoom

mode (p.47).

Top Control

r

y

!0

!1

!2

tLENS button

Enter the focus, zoom, and lens shift adjustment

mode (p.30).

iWARNING FILTER indicator

– Blinks orange indicating the filter needs cleaning.

– Lights orange when clogging of the filter is

detected, urging immediate cleaning.

oLAMP indicator

Lights red during operations.

!0POWER indicator

– Lights when in stand-by mode and during

operations.

– Blinks during the cooling-off period.

– Blinks in the Power management mode (p.53).

!2MENU button

Open or close the On-Screen Menu (p.26).

✔Note:

 •Allfiveindicatorsonthetopcontrolblinkswhenthe

projectordetectsanabnormalcondition.

Part Names and Functions

14

q STAND-BY button

Turn the projector off (p.25).

t ON button

Turn the projector on (p.24).

y INPUT 1 – 3 buttons

Select an input source (INPUT 1 – INPUT 3) (pp.34–

35).

uAUTO PC button

Automatically adjusts the computer image to its

optimum setting (pp.30, 38).

i FREEZE button

Freeze the picture on the screen (p.30).

oPOINT ed 7 8 ( VOLUME + / – ) buttons

– Select an item or adjust the value in the On-

Screen Menu (p.26).

– Pan the image in Digital zoom + mode (p.47).

– Adjust the volume level (with Point 7 8 buttons)

(p.29).

Remote Control

!2 L-CLICK button

Acts as the left mouse button for wireless mouse

operation (p.33).

e SIGNAL EMISSION indicator

Lights red while the laser beam is being emitted

from the laser light window or a signal is being sent

from the remote control to the projector (p.32).

!0 PRESENTATION POINTER button

Move a pointer of the projector or a pointer for

wireless mouse operation (pp.32–33).

To ensure safe operation, observe the following

precautions:

– Do not bend, drop, or expose the remote control to

moisture or heat.

– For cleaning,

use a soft dry cloth. Do not apply benzene,

thinner, splay, or any other chemical materials.

!2

w WIRED REMOTE jack

Connect the remote control cable (supplied) to this

jack when using as a wired remote control.

!1 INFO. button

Display the input source information (p.28).

r LASER LIGHT window

A laser beam is emitted from here (p.32).

Part Names and Functions

o

t

y

r

!0

u

i

!1

qe

w

15

Remote Control

!3 MENU button

Open or close the On-Screen Menu (p.26).

!6ZOOM ed buttons

Zoom in and out the images (p.30).

!5D.ZOOM button

Select the Digital zoom +/- mode and resize the

image (p.47).

@0FOCUS button

Adjust the focus (p.30).

!8MUTE button

Mute the sound (p.29).

!4P-TIMER button

Operate the P-timer function (p.31).

@1NO SHOW button

Temporarily turn off the image on the screen (p.31).

@2KEYSTONE button

Correct keystone distortion (p.31).

@6SELECT button

– Execute the selected item (p.26).

– Expand or compress the image in the Digital

zoom mode (p.47).

!7LASER button

– Operate the Laser pointer function. Laser beam

is emitted while pressing this button for one

minute. When using the laser pointer for more

than one minute, release the LASER button and

press it again (p.32).

– Display the Pointer on the screen (p.32).

!9 RESET/ON/ALL-OFF switch

When using the remote control, set this switch to

“ON.” Set it to “ALL OFF” for power saving when

it is not in use. Slide this switch to “RESET” to

initialize the remote control code or switch the

Spotlight and Pointer to the Laser pointer function

(p.32).

@5 R-CLICK button

Acts as the right mouse button for wireless mouse

operation (p.33).

@3 LENS SHIFT button

Select the Lens Shift function (p.30).

@4 SCREEN button

Select the screen size (p.30).

@7 NUMBER buttons

Act as number buttons. Use these buttons when

setting the remote control codes (p.17) or when

entering the PIN code numbers (pp. 24, 50–51,

55–56).

Part Names and Functions

!9

!5

!3

!4

!8

!6

!7

@0

@6

@7

@3

@2

@1

@4

@5

For PIN code

and remote

control code.

16

Projection angle can be adjusted up to 5.0 degrees with the

adjustable feet.

Rotate the adjustable feet and tilt the projector to the proper

height; to raise the projector, rotate the both feet clockwise.

To lower the projector or to retract the adjustable feet, rotate

the both feet counterclockwise.

To correct keystone distortion, press the KEYSTONE button

on the remote control or select Keystone from the menu

(see pages 15, 31, 45).

Adjustable Feet

To ensure safe operation, please observe the following precautions :

● Use two (2) AAA or LR03 type alkaline batteries.

● Always replace batteries in sets.

● Do not use a new battery with a used battery.

● Avoid contact with water or liquid.

● Do not expose the remote control to moisture or heat.

● Do not drop the remote control.

● If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.

● Risk of an explosion if battery is replaced by an incorrect type.

● Dispose of used batteries according to the instructions.

Press the lid

downward and slide it.

Open the battery

compartment lid.

Install new batteries

into the compartment.

Replace the

compartment lid.

Two AAA size batteries

For correct polarity (+ and –),

be sure battery terminals are

in contact with pins in the

compartment.

1 2 3

Point the remote control toward the projector (to Infrared

Remote Receivers) when pressing the buttons. Maximum

operating range for the remote control is about 16.4’ (5 m)

and 60 degrees in front and rear of the projector.

Infrared Remote Receivers are provided both in front and

back of the projector. You can conveniently use both of the

receivers (see pages 10, 52).

Remote Control Receivers and Operating Range

Remote Control Battery Installation

16.4’

(5 m)

16.4’

(5 m)

Part Names and Functions

✔Note:

 •Whenhangingtheprojectorfromtheceiling,selectthe

InfraredRemoteReceiverwhichislocatedfartheraway

fromthefluorescentlight(p.52).

17

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote

control codes prevents interference from other remote controls when several projectors or video equipment

next to each other are operated at the same time. Change the remote control code for the projector first before

changing that for the remote control. See “Remote control” in the Setting Menu on page 52.

Press and hold the MENU and a number button (1–8)

for more than five seconds to switch between the

codes.

1

To initialize the remote control code, slide the RESET/

ON/ALL-OFF switch to “RESET,” and then to “ON.” The

initial code is set to Code 1.

2

Press and hold the MENU and a number button

(1–8) that corresponds to the remote control code

for more than five seconds to switch between

the codes.

MENU button

Remote Control Code

Number buttons

RESET/ON/ALL OFF

Switch

Part Names and Functions

18

✔Note:

 •Thebrightnessintheroomhasagreatinfluenceonpicturequality.Itisrecommendedtolimit

ambientlightinginordertoobtainthebestimage.

 •Allmeasurementsareapproximateandmayvaryfromtheactualsizes.

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the

screen.

10.30m

6.84m

5.11m

3.38m

1.26m

10 0”

32.8' (10.0m)

22.4' (6.84m)

16.8' (5.11m)

14.4' (4.39m)

3.9' (1.2m)

150”

200”

300”

230”

155”

11 6”

78”

30”

Max. Zoom

Min. Zoom

Screen Size

(W x H) mm

4:3 aspect ratio

Zoom (min.)

30”

Zoom (max.)

610 x 457

3.9’ (1.2 m)

–––––

100”

2032 x 1524

14.4’ (4.39 m)

11.1’ (3.38 m)

150”

3048 x 2286

21.8’ (6.63 m)

16.8’ (5.11 m)

200”

4064 x 3048

29.1’ (8.86 m)

22.4’ (6.84 m)

300”

6096 x 4572

–––––

32.8’ (10.0 m)

(Inch Diagonal)

(Center)

Positioning the Projector

Installation

(for LC-SXG400)

15% 15%

50%

uppermost downmost

leftmost rightmost

Moving the Lens

For details about the Lens shift function, refer to “Lens Shift Adjustment” on page 28. The amount of lens shift

range varies depending on the lens. The figures below are for LC-SXG400.

When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the

sales dealer for detailed information of the optional lens specifications.

19

When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the

sales dealer for detailed information of the optional lens specifications.

Fit the lens to the projector by aligning the red dot

on the lens with the red dot of the projector.

Remove the lens mount cover.

1

2

Attaching the lens to the projector

Slowly turn the lens clockwise until it clicks. Make

sure that the lens is fully inserted to the projector.

3

Red dots

CAUTION

Do not press the lens release button when

attaching the lens.

Lens Installation

Installation

While pressing the Lens release button on the top

of the cabinet, turn the lens counterclockwise until

it stops and pull it out slowly from the projector.

Shift the lens to the center position by using the

Lens shift function (see page 28).

1

2

Removing the lens

Lens Release button

CAUTION

Be careful when handling the lens. Do not

drop.

20

Connecting to a Computer (Digital and Analog RGB)

Cables used for connection

• VGA Cable (HDB 15 pin)* • USB Cable

• DVI-Digital Cable • Audio Cables (Mini Plug [stereo] x 2)

• BNC Cable

(*One cable is supplied; other cables are not supplied with the projector.)

External Audio Equipment

DVI-Digital

cable

USB

cable

Audio

cable

(stereo)

Audio cable

(stereo)

USB port

Audio

Output

USB

AUDIO OUT

(stereo)

Audio Input

Unplug the power cords of both the projector and external

equipment from the AC outlet

before connecting cables.

✔Note:

 •WhentheAUDIOOUTisplugged-in,theprojector’sbuilt-

inspeakerisnotavailable.

 •USBcableconnectionisneededwhenoperatingthe

computerwiththeremotecontrol.

Monitor

Output

DIGITAL

(DVI-D)

VGA

cable

Monitor

Output

Monitor Output

BNC

cable

ANALOG

IN

Monitor

Input

VGA

cable

ANALOG

OUT

G B R H/V V

AUDIO

IN

Installation

Page is loading ...

Eiki LC-SXG400L User manual

This manual is also suitable for

Eiki LC-SXG400L User manual

Related papers

Other documents