Ā© 2015 Samsung Electronics Co., Ltd. All rights reserved.
BN68-07048T-01
Gracias por comprar este producto Samsung.
Para recibir un servicio mƔs completo, registre su
producto en
www.samsung.com/register
Modelo______________Nrodeserie______________
E-MANUAL
TV LED
Manual del usuario
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
ComunĆquese con SAMSUNG WORLD WIDE
Si desea hacernos alguna pregunta o comentario en relaciĆ³n con los productos de Samsung, comunĆquese con nuestro centro de
atenciĆ³n al cliente de SAMSUNG.
Country
Customer Care Center
Web Site
ARGENTINE 0800-555-SAMSUNG (0800-555-7267) www.samsung.com/ar/support
URUGUAY 000-405-437-33 www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
PARAGUAY 009-800-542-0001 www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
BRAZIL 0800-124-421 (Demais cidades e regiƵes)
4004-0000 (Capitais e grandes centros)
www.samsung.com/br/support
CHILE 800-SAMSUNG(726-7864) www.samsung.com/cl/support
BOLIVIA 800-10-7260 www.samsung.com/cl/support
COLOMBIA BogotĆ” 600 12 72
Gratis desde cualquier parte del paĆs 01 8000 112
112 Ć³ desde su celular #SAM(726)
www.samsung.com/co/support
COSTA RICA 0-800-507-7267
00-800-1-SAMSUNG (726-7864)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
DOMINICAN REPUBLIC 1-800-751-2676 www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
ECUADOR 1-800-10-7267
1-800-SAMSUNG (72-6786)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
EL SALVADOR 800-6225
800-0726-7864
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
GUATEMALA 1-800-299-0013
1-800-299-0033
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
HONDURAS 800-2791-9267
800-2791-9111
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
JAMAICA 1-800-234-7267
1-800-SAMSUNG (726-7864)
www.samsung.com/latin_en/support (English)
NICARAGUA 001-800-5077267 www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
PANAMA 800-7267
800-0101
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
PERU 0800-777-08 www.samsung.com/pe/support
PUERTO RICO 1-800-682-3180 www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
VENEZUELA 0-800-SAMSUNG (726-7864) www.samsung.com/ve/support
[J4000-ZS]BN68-07048T-00L02.indb 1 2015-04-20 ļæ½ļæ½ 11:07:26
Important Safety Instructions
y The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
y Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
y Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of ļ¬re or electric shock.
y Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
y Make sure to pull out the power cord from the outlet before cleaning.
y This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect
the environment. Please contact your local authorities for disposal or recycling information.
y Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in ļ¬re or electric shock.
y Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.
y To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
y Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
electrical supply. (depending on the model)
y Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
y To avoid electric shock, never touch the inside of this apparatus. Only a qualiļ¬ed technician should open this apparatus.
y Make sure to plug the power cord in until it is ļ¬rmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do
not touch the power cord with wet hands.
y If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and
contact an authorized dealer or service center.
y Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time
(especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat,
or cause the insulation to deteriorate.
y Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity,
chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious
damage to your set.
y Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
y
To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily
accessible at all times.
y
Do not allow children to hang onto the product.
y
Store the accessories (batteries, etc.) in a location safely out of the reach of children.
y
Do not install the product in an unstable location such as a shaky self, a slanted ļ¬oor, or a location exposed to vibration.
y
Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
y
To clean the product, unplug the power cord from the power outlet and wipe the product using a soft cloth dipped in a small amount of water.
Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the
appearance or erase the printing on the product.
y
Do not expose the apparatus to dripping or splashing.
y
Do not dispose of batteries in a ļ¬re.
y
Do not short circuit, disassemble, or overheat the batteries.
y
There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.
y
WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL
TIMES.
Warning! Important Safety Instructions
Please read the safety instructions below before installing and using the product.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
ALL SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
English - 2
[J4000-ZS]BN68-07048T-00L02.indb 2 2015-04-20 ļæ½ļæ½ 11:07:27
For more information on how to view the e-Manual (P. 10)
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product
design and speciļ¬cations may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
ā
See the warranty card for more information on warranty terms.
Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format
full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ļ¬ll the screen
if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as
the dark sidebars on no expanded standard format television video and programming, should be limited to no more than 5% of the total
television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or
computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the
above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture.
To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On
LED models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use,
as well as burned in images, are not covered by your Samsung limited warranty.
Still image warning
Avoid displaying still images (such as jpeg picture ļ¬les) or still image elements (such as TV channel logos, panorama or 4:3 image format,
stock or news bars at screen bottom etc.) on the screen. Constant displaying of a still picture can cause ghosting of the LED screen,
which will affect image quality. To reduce risk of this effect, please follow the recommendations below:
ā¢ī Avoid displaying the same TV channel for long periods.
ā¢ī Always try to display a full screen image.
ā¢ī Reducing brightness and contrast will help to avoid the appearance of after-images.
ā¢ī Use all TV features designed to reduce image retention and screen burn, refer to e-Manual for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in ļ¬re or a problem with the product due to an increase in the internal temperature of the product.
ā
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
ā¢ī If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product
falling.
ā
The appearance may differ depending on the product.
ā
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
English - 3
[J4000-ZS]BN68-07048T-00L02.indb 3 2015-04-20 ļæ½ļæ½ 11:07:27
List of Features
ā¢ī Media Play: Allows you to play music ļ¬les, pictures, and movies saved on a USB device.
ā¢ī e-Manual: Provides a detailed, on-screen user's manual built into your TV. (P. 10)
Accessories
ā
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
ā
The itemsā colors and shapes may vary depending on the models.
ā
Check that there are no accessories hidden behind packing materials when you open the box.
ā¢ī Remote Control & Batteries (AAA x 2)
ā¢ī Ownerās Instructions
ā¢ī Warranty Card / Regulatory Guide (Not available in some locations)
ā¢ī Power Cord
ā¢ī Adapter ā¢ī wall mount adapter
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF)
English - 4
[J4000-ZS]BN68-07048T-00L02.indb 4 2015-04-20 ļæ½ļæ½ 11:07:27
Remote Control Buttons
ā
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
ā
The button names above may be differ from the actual names.
Installing batteries (Battery size: AAA)
ā
NOTE
ā¢ī Use the remote control within 23 feet of the TV.
ā¢ī Bright light may affect the performance of the remote control.
Avoid using when near special ļ¬ uorescent lights or neon signs.
ā¢ī The color and shape may vary depending on the model.
Return to the previous channel.
Press to directly access to channels.
Turns the TV on and off.
Use these buttons in a speciļ¬ c feature.
E-MANUAL: Displays the e-Manual.
PIC SIZE: Lets you choose the picture
size.
: Turns the Soccer Mode on or off.
Cut off the sound temporarily.
Display the EPG (Electronic Program Guide).
(Not available in some countries.)
Displays the channel list on the screen.
Press to display information on the TV
screen.
Quickly select frequently used functions.
Selects the on-screen menu items and
changes the values seen on the menu.
Exit the menu.
Return to the previous menu.
Display and select the available video
sources.
Use these buttons according to the direction
on screen.
Change channels.
Displays the main on-screen menu.
View the Media Play.
Adjusts the volume.
E-MANUAL
PIC SIZE
GUIDE
MEDIA.P
Press to select additional channels (digital)
being broadcast by the same station. For
example, to select channel ā54.3ā, press
ā54ā, then press ā-ā and ā3ā.
(Not available in some countries.)
English - 5
[J4000-ZS]BN68-07048T-00L02.indb 5 2015-04-20 ļæ½ļæ½ 11:07:28
Viewing the Control Panel
The TV's Controller on the bottom right side of the TV, lets you control the TV without the remote control.
: Turns the TV on and off.
/ : Changes channels.
/ : Adjusts the volume.
: Displays and selects the available video sources.
Control Menu
Remote control sensor/TV Controller
ā
If you press it first, the control menu appears. You can select the function by pressing and holding the TV's controller.
ā
The product color and shape may vary depending on the model.
ā
With the TV's Controller, you cannot perform other operations except for turning the TV on or off, changing the channel, adjusting
the volume, and switching the input source.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to
decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for
example). It is best to unplug the power cord.
Setup (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in conļ¬guring basic settings. Press the POWER
P
button. Set the initial setup following instructions that the TV guides.
ā
Setup is available only when the Source is set to TV.
ā
To start the Setup, enter the password using the remote control. The default password is 0-0-0-0.
ā
Select the proper county. The setup process and TV menu will differ depending on selecting country.
If You Want to Reset This Feature...
O
MENU
m
ā System ā Setup ā ENTER
E
English - 6
[J4000-ZS]BN68-07048T-00L02.indb 6 2015-04-20 ļæ½ļæ½ 11:07:28
Making Connections
Connect your TV to an antenna or cable connection, and then connect your peripherals. When done, connect the power cord to the TV,
and then connect the power cord to an AC wall outlet. If you are connecting your TV to a cable or satellite box using HDMI, Component,
or Composite connections, you do not need to connect the ANT IN jack to an antenna or a cable connection.
ā¢ī For the best picture and audio quality, connect digital devices using an HDMI cable.
ā¢ī If you connect an external device to the TV that uses an older version of HDMI, the video and audio may not work. If this occurs, ask the manufacturer of the
device about the HDMI version and, if it is out of date, request an upgrade.
ā¢ī Be sure to purchase a certiļ¬ed HDMI cable. Otherwise, the picture may not display or a connection error may occur.
ā¢ī PC/DVI AUDIO IN input is not supported.
ā¢ī For set-top box connection using HDMI cable, we highly recommend you to connect the HDMI IN 1(STB) port.
ā¢ī For an HDMI to DVI cable connection, you must use the HDMI IN 2(DVI) jack.
ā¢ī If an HDMI to DVI cable is connected to the HDMI IN 2(DVI) port, the audio does not work.
ā¢ī For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to the HDMI IN 2(DVI) jack on the TV. Use the PC's speakers for
audio.
ā¢ī The HDD (Hard Disk Drive) connected to USB is not supported.
Display Modes (HDMI/DVI Input)
Optimal resolution is 1366 x 768@60Hz.
Mode Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM 720 x 400 31.469 70.087 28.322 -/+
MAC
640 x 480 35.000 66.667 30.240 -/-
832 x 624 49.726 74.551 57.284 -/-
VESA DMT
640 x 480 31.469 59.940 25.175 -/-
640 x 480 37.861 72.809 31.500 -/-
640 x 480 37.500 75.000 31.500 -/-
800 x 600 37.879 60.317 40.000 +/+
800 x 600 48.077 72.188 50.000 +/+
800 x 600 46.875 75.000 49.500 +/+
1024 x 768 48.363 60.004 65.000 -/-
1024 x 768 56.476 70.069 75.000 -/-
1024 x 768 60.023 75.029 78.750 +/+
1280 x 720 45.000 60.000 74.250 +/+
1366 x 768 47.712 59.790 85.500 +/+
ā
NOTE
ā¢ī The interlace mode is not supported.
ā¢ī The set might operate abnormally if a non-standard video format is selected.
English - 7
[J4000-ZS]BN68-07048T-00L02.indb 7 2015-04-20 ļæ½ļæ½ 11:07:29
Changing the Input Source
Source
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver
connected to the TV.
1. Press the SOURCE button on your remote.
2. Select a desired external input source.
ā TV / HDMI1 / HDMI2/DVI / AV / Component
ā
In the Source, connected inputs will be highlighted.
ā
PC(D-Sub) input is not supported. If you want to connect PC to the TV, use HDMI2/DVI input.
How to use Edit Name
In the Source, press the TOOLS button, and then you can set an external input sources name you want.
ā VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV
/ Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.
ā
When connecting a PC to the HDMI IN 2(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
ā
When connecting a PC to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under
Edit Name.
ā
When connecting an AV devices to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices
mode under Edit Name.
Information
You can see detailed information about the connected external device.
English - 8
[J4000-ZS]BN68-07048T-00L02.indb 8 2015-04-20 ļæ½ļæ½ 11:07:29
How to View the e-Manual
E-MANUAL
You can ļ¬ nd instructions for your TVās features in the e-Manual in your TV. To use, press the E-MANUAL button on
your remote. Move the cursor using the up/down/right/left buttons to highlight a category, then a topic, and then
press the ENTER
E
button. The e-Manual displays the page you want to see.
You can also access it through the menu:
O
MENU
m
ā Support ā e-Manual ā ENTER
E
ā
If you want to return to the e-Manual, press the E-MANUAL button on your remote.
ā
You can not use the Try Now function if the menu is not activated.
Screen Display
Basic Features
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Options
Changing the Preset Sound Modes
Adjusting Sound Settings
}
Index
E
Enter
e
Exit
TV Screen: Displays the program,
movie, video, etc. you are currently
watching.
The category list. Press
l
or
r
button to select the category you
want.
Displays the sub-menu list. Use the
arrow buttons on your remote to
move the cursor.
Press the ENTER
E
button to
select the sub-menu you want.
Operation Buttons:
}
Blue (Index): Displays index screen.
E
Enter: Select a category or sub-menu.
e
Exit: Exit the e-Manual.
How to toggle between an e-Manual topic and the corresponding OSD menu(s).
E-MANUAL
Try Now
a
Try Now
b
Home
{
Zoom
}
Index
L
Page
e
Exit
Basic Features > Changing the Preset Picture Mode (1/1)
Picture
Picture Mode Standard
ā¢ Backlight 10
ā¢ Contrast 95
ā¢ Brightness 45
ā¢ Sharpness 50
ā¢ Color 50
ā¢ Tint (G/R) G50 R50
ā
This function is not enabled in some menus.
Method 1 Method 2
1. If you want to use the menu that corresponds to an
e-Manual topic, press the red button to select Try Now.
2. To return to the e-Manual screen, press the E-MANUAL
button.
1. Press the ENTER
E
button when a topic is displayed. āDo
you want to execute this?ā appears. Select Yes, and then
press the ENTER
E
button. The OSD window appears.
2. To return to the e-Manual screen, press the E-MANUAL
button.
English - 9
[J4000-ZS]BN68-07048T-00L02.indb 9 2015-04-20 ļæ½ļæ½ 11:07:32
Viewing the Contents
a
Try Now
b
Home
{
Zoom
}
Index
L
Page
e
Exit
Basic Features > Changing the Preset Picture Mode (1/1)
Contents Area: Contains the topic contents if you
selected a sub-menu. To move to the previous or
next page, press the
l
or
r
button.
Operation Buttons:
a
Red (Try Now): Displays the OSD menu that corresponds to the topic. To return to the e-Manual
screen, press the E-MANUAL button.
b
Green (Home): Moves to the e-Manual home screen.
{
Yellow (Zoom): Magniļ¬es a screen.
}
Blue (Index): Displays the Index screen.
L
(Page): Moves to previous or next page.
e
(Exit): Exit the e-Manual.
Using the Zoom mode
When you are viewing an e-Manual instruction page, press the
{
(Zoom) button to magnify the screen. You can scroll through the
magniļ¬ed screen by using the
u
or
d
buttons.
ā
To return to the screen to normal size, press the RETURN
button.
U
Move
R
Return
How to search for a topic on the index page
1. To search for a topic, press the left or right arrow button to select a letter. The Index displays a list of topics and keywords that begin
with the letter you selected.
2. Press the up or down arrow button to select a topic or keyword you want, and then press the ENTER
E
button to select a topic you
want to see.
3. The e-Manual page with the topic appears.
ā
To close the Index screen, press the RETURN button.
English - 10
[J4000-ZS]BN68-07048T-00L02.indb 10 2015-04-20 ļæ½ļæ½ 11:07:33
Troubleshooting
If the TV seems to have a problem, ļ¬rst try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit
samsung.com, then click on Support, or call Samsung customer service.
Issues Solutions and Explanations
Poor picture
First of all, please perform the Picture Test and conļ¬rm that your TV is properly displaying the
test image.
ā¢ī go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or
signal.
The TV image does not look as
good as it did in the store.
ā¢ī If you have an analog Cable/Set top box, upgrade to a digital set top box. Use HDMI or Component
cables to deliver HD (high deļ¬nition) picture quality.
ā¢ī Cable/Satellite subscribers: Try HD stations from the channel line up.
ā¢ī Aerial connection: Try HD stations after performing auto tuning.
ā¢ī Many HD channels are up scaled from SD(Standard Deļ¬nition) contents.
ā¢ī Adjust the Cable/Set top box video output resolution to 1080i or 720p.
ā¢ī Make sure you are watching the TV at the minimum recommended distance based on the size and
deļ¬nition of the signal.
The picture is distorted: macroblock
error, small block, dots, pixelization.
ā¢ī Compression of video contents may cause picture distortion, especially in fast moving pictures such as
sports and action movies.
ā¢ī Low signal level can cause picture distortion. This is not a TV problem.
ā¢ī Mobile phones used close to the TV (up to 3.3 ft) may cause noise in picture on analog and digital TV.
Color is wrong or missing.
ā¢ī If youāre using component connection, make sure the component cables are connected to the correct
jacks. Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness.
ā¢ī Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
ā¢ī Adjust Energy Saving option in the TV menu (go to MENU - System - Eco Solution - Energy Saving)
ā¢ī Try resetting the picture to view the default picture setting. (go to MENU - Picture - Reset Picture)
There is a dotted line on the edge of
the screen.
ā¢ī If the picture size is set to Screen Fit, change it to 16:9.
ā¢ī Change cable/Set top box resolution.
The picture is black and white.
ā¢ī If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component
input 1 on the TV.
When changing channels, the
picture freezes or is distorted or
delayed.
ā¢ī If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes)
ā¢ī Set output resolution of the cable box to 1080i or 720p.
Sound Problem
ā¢ī First of all, please perform the Sound Test to conļ¬rm that your TV audio is properly operating.
ā¢ī go to MENU - Support - Self Diagnosis - Sound Test
ā¢ī If the audio is OK, the sound problem may be caused by the source or signal.
There is no sound or the sound is
too low at maximum volume.
ā¢ī Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
The picture is good but there is no
sound.
ā¢ī Set the Speaker Select option to TV Speaker in the Sound menu.
ā¢ī If you are using an external device, make sure the audio cables are connected to the correct audio input
jacks on the TV.
ā¢ī If you are using an external device, check the deviceās audio output option (ex. you may need to change
your cable boxās audio option to HDMI when you have a HDMI connected to your TV).
ā¢ī If you are using a DVI to HDMI cable, a separate audio cable is required.
ā¢ī Reboot the connected device by reconnecting the deviceās power cable.
The speakers are making an
inappropriate noise.
ā¢ī Check the cable connections. Make sure a video cable is not connected to an audio input.
ā¢ī For Antenna or Cable connections, check the signal information. Low signal level may cause sound
distortion.
English - 11
[J4000-ZS]BN68-07048T-00L02.indb 11 2015-04-20 ļæ½ļæ½ 11:07:33
Issues Solutions and Explanations
No Picture, No Video
The TV will not turn on.
ā¢ī Make sure the AC power cord is securely plugged into the wall outlet and the TV.
ā¢ī Make sure the wall outlet is working.
ā¢ī Try pressing the POWER button on the TV to make sure the problem is not the remote control. If the TV
turns on, refer to āRemote control does not workā below.
The TV turns off automatically.
ā¢ī Ensure the Sleep Timer is set to Off in the System menu.
ā¢ī If your PC is connected to the TV, check your PC power settings.
ā¢ī Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
ā¢ī When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is
no signal.
There is no picture/video
ā¢ī Check cable connections. (remove and reconnect all cables connected to the TV and external devices).
ā¢ī Set your external deviceās (Cable/Set top box, DVD, Blu-ray etc) video outputs to match the connections to
the TV input. For example, if an external deviceās output is HDMI, it should be connected to an HDMI input
on the TV.
ā¢ī Make sure your connected devices are powered on.
ā¢ī Be sure to select the TVās correct source by pressing the SOURCE button on the remote control.
ā¢ī Reboot the connected device by reconnecting the deviceās power cable.
Antenna(Air / Cable) Connection
The TV is not receiving all channels.
ā¢ī Make sure the coaxial cable is connected securely.
ā¢ī Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System - Setup
(Initial setup) and wait for all available channels to be stored.
ā¢ī Verify the Antenna is positioned correctly.
No Caption on digital channels.
ā¢ī Check Caption setup menu.
ā¢ī Some channels may not have caption data.
The picture is distorted: macroblock,
error, small block, dots, pixelization.
ā¢ī Compression of video contents may cause picture distortion, especially on fast moving pictures such as
sports and action movies.
ā¢ī A low signal can cause picture distortion. This is not a TV problem.
Others
The picture will not display in full
screen.
ā¢ī HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
ā¢ī Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV.
ā¢ī Adjust picture size option on your external device or TV to full screen.
English - 12
[J4000-ZS]BN68-07048T-00L02.indb 12 2015-04-20 ļæ½ļæ½ 11:07:33
Issues Solutions and Explanations
The remote control does not work.
ā¢ī Replace the remote control batteries with correct polarity (+/ā).
ā¢ī Clean the transmission window located on the top of the remote control.
ā¢ī Try pointing the remote control directly at the TV from 5~6 feet away.
The cable/set top box remote
control does not turn the TV on or
off, or adjust the volume.
ā¢ī Program the Cable/Set top box remote control to the operate the TV. Refer to the Cable/Set top box user
manual for SAMSUNG TV code.
A āMode Not Supportedā message
appears.
ā¢ī Check the supported resolution of the TV and adjust the external deviceās output resolution accordingly.
Refer to resolution settings in this manual.
Caption on TV menu is greyed out.
ā¢ī Caption can not be selected in the TV menu when connected via HDMI or Component.
ā¢ī Caption must be activated on the external device.
There is a plastic smell from the TV.
ā¢ī This smell is normal and will dissipate over time.
TV Signal Information is unavailable
in the Self Diagnosis Test menu.
(digital channels only)
ā¢ī This function is only available with digital channels from an Antenna / RF / Coax connection.
TV is tilted to the right or left side.
ā¢ī Remove the stand base from the TV and reassemble it.
There are difļ¬culties assembling
stand base.
ā¢ī Make sure the TV is placed on a ļ¬at surface. if you cannot remove the screws from the TV, please use a
magnetized screw driver.
The Broadcasting menu is grey out
(unavailable).
ā¢ī The Broadcasting menu is only available when the TV source is selected.
Your settings are lost after 5 minutes
or every time the TV is turned off.
ā¢ī If TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to
change the settings from Store Demo mode to Home Use, press the SOURCE button to select TV
mode, and go to MENU ā Support ā Use Mode.
You have intermittent loss of audio
or video.
ā¢ī Check the cable connections and reconnect them.
ā¢ī Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
ļ¬exible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
The PIP menu is not available.
ā¢ī PIP functionality is only available when you are using a HDMI or components source.
You see small particles when you
look closely at the edge of the frame
of the TV.
ā¢ī This is part of the productās design and is not a defect.
POP (TVās internal banner ad)
appears on the screen.
ā¢ī Go to MENU ā Support ā Use Mode, and then select Home Use.
The message āThis ļ¬le may not be
playable properly.ā appears.
ā¢ī This may appear because of high bit rate of content. Content generally will play but could experience some
playability issue.
ā
Some functions and pictures shown in this manual are available on specific models only.
ā
You can keep your TV in optimum operating condition by upgrading to the latest firmware (www.samsung.com ā support) by
USB.
ā
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may
be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English - 13
[J4000-ZS]BN68-07048T-00L02.indb 13 2015-04-20 ļæ½ļæ½ 11:07:33
Installing the Wall Mount
Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as recommended by the manufacturer. Unless it is correctly
mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product.
Installing the Wall Mount Kit
You can mount the TV on the wall using a wall mount kit (sold separately). For a models providing the wall mount adapters, install them as
shown in the ļ¬gure before installing any wall mount kit.
ā
Refer to the installation manual included with the Samsung wall mount kit.
TV
Wall mount
Bracket
Wall mount
Adapter
For detailed information about installing the wall mount, see the instructions provided with the wall mount kit. We recommend that you
contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is
not responsible for any damage to the product or injury to yourself or others if you choose to install the wall mount on your own.
Wall Mount Kit Speciļ¬cations (VESA)
ā
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the ļ¬oor. When attaching to other building materials, please contact your nearest
dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
ā
NOTE
ā¢ī Standard dimensions for wall mount kits are shown in the table below.
ā¢ī When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
ā¢ī Do not use screws that do not comply with the VESA standard screw speciļ¬cations.
ā¢ī Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw speciļ¬cations.
Screws that are too long may cause damage to the inside of the TV set.
ā¢ī For wall mounts that do not comply with the VESA standard screw speciļ¬cations, the length of the screws may differ depending
on the wall mount speciļ¬cations.
ā¢ī Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
ā¢ī Samsung is not liable for product damage or personal injury when a non-VESA or non-speciļ¬ed wall mount is used or the
consumer fails to follow the product installation instructions.
ā¢ī Do not mount the TV at more than a 15 degree tilt.
ā¢ī Always use two people to mount the TV to a wall.
Product Family Inches VESA Spec. (A * B) C (mm) Standard Screw Quantity
LED-TV 32 200 X 200 19.8 ~ 20.8 M8 4
ā
Remove the screws in the mounting holes before you install the wall mount.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.
English - 14
[J4000-ZS]BN68-07048T-00L02.indb 14 2015-04-20 ļæ½ļæ½ 11:07:34
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children
do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death.
Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for
safety purposes, as follows.
To Avoid the TV from Falling
1. Put the screws into the clamps and ļ¬rmly fasten them onto the wall. Conļ¬rm
that the screws have been ļ¬rmly installed onto the wall.
ā
You may need additional material such as an anchor depending on
the type of wall.
ā
Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2. Remove the screws from the back center of the TV, put the screws into the
clamps, and then fasten the screws onto the TV again.
ā
Screws may not be supplied with the product. In this case, please
purchase the screws.
3 Connect the clamps ļ¬xed onto the TV and the clamps ļ¬xed onto the wall
with a strong string and then tie the string tightly.
ā
NOTE
ā¢ī Install the TV near to the wall so that it does not fall backwards.
ā¢ī It is safe to connect the string so that the clamps ļ¬xed on the wall are
equal to or lower than the clamps ļ¬xed on the TV.
ā¢ī Untie the string before moving the TV.
4 Verify all connections are properly secured. Periodically check connections
for any sign of fatigue for failure. If you have any doubt about the security of
your connections, contact a professional installer.
Wall
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically ļ¬x the system when using it in a public place. The
appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the
Kensington Lock for additional information on proper use.
ā
Please find a ā
K
ā icon on the rear of the TV. A Kensington slot is beside the ā
K
ā icon.
ā
The position and color may differ depending on the model.
<Optional>
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
ā
Note
ā¢ī These are general instructions. For exact instructions, see the User manual supplied with the locking device.
ā¢ī The locking device has to be purchased separately.
ā¢ī The location of the Kensington slot may be different depending on the TV model.
English - 15
[J4000-ZS]BN68-07048T-00L02.indb 15 2015-04-20 ļæ½ļæ½ 11:07:34
Storage and Maintenance
ā
If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.
ā
The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a
soft cloth to prevent scratches.
Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, ļ¬re, or
electric shock.
Clean the product with a soft cloth dampened with a small amount of water. Do not use a ļ¬ammable liquid
(e.g. benzene, thinners) or a cleaning agent.
License
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with
the Symbol, DTS Premium Sound, DTS Digital Surround, and DTS Express are registered trademarks or trademarks of DTS, Inc. in the
United States and/or other countries. DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in
combination with the Symbol, and DTS Studio Sound are registered trademarks or trademarks of DTS, Inc. in the United States and/or
other countries. Ā© DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Deļ¬nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
This DivX Certiļ¬edĀ® device has passed rigorous testing to ensure it plays DivXĀ® video.
To play purchased DivX movies, ļ¬rst register your device at vod.divx.com. Find your registration code in the DivX VOD section of your
device setup menu.
DivX Certiļ¬edĀ® to play DivXĀ® video up to HD 1080p, including premium content.
DivXĀ®, DivX Certiļ¬edĀ® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
This device supports DivX Plus StreamingĀ® for enjoying HD movies and TV shows with advanced features (multi-language subtitles,
multiple audio tracks, chapters, smooth FF/RW, etc.) streamed to your device.
Open Source License Notice
Open Source used in this product can be found on the following webpage.
(http://opensource.samsung.com) Open Source License Notice is written only English.
English - 16
[J4000-ZS]BN68-07048T-00L02.indb 16 2015-04-20 ļæ½ļæ½ 11:07:35
Speciļ¬cations
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50Ā°F to 104Ā°F (10Ā°C to 40Ā°C)
10% to 80%, non-condensing
-4Ā°F to 113Ā°F (-20Ā°C to 45Ā°C)
5% to 95%, non-condensing
Model Name UN32J4000
Display Resolution 1366 X 768
Screen Size
32Ė Class
(31.5 measured diagonally)
Sound 10W (5W+5W)
Dimensions (W x H x D)
Body
With stand
745.4 x 442.2 x 69 mm
745.4 x 463.1 x 150.5 mm
Weight
Without Stand
With Stand
3.7 kg
3.8 kg
ā
Design and specifications are subject to change without prior notice.
ā
The actual appearance of the TV may differ from the images in this manual, depending on the model.
ā
For information about the power supply, and more about power consumption, refer to the label attached to the product.
English - 17
[J4000-ZS]BN68-07048T-00L02.indb 17 2015-04-20 ļæ½ļæ½ 11:07:35
Supported Videos Formats
File Extention Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec
*.avi / *.mkv
*.asf / *.wmv
*.mp4 / *.3gp
*.vro / *.mpg
*.mpeg / *.ts
*.tp / *.trp
*.mov / *.ļ¬v
*.vob / *.svi
*.divx
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
Divx 3.11 / 4 / 5 / 6
1920 x 1080
6~30
30
Dolby Digital
LPCM
ADPCM(IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital Plus
MPEG(MP3)
DTS (Core)
G.711(A-Law, Ī¼-Law)
MPEG4 SP/ASP
H.264 BP/MP/HP
Motion JPEG 640 x 480 8
Window Media Video v9
1920 x 1080 30
MPEG2
MPEG1
ā
Other Restrictions
ā¢ī Codecs may not function properly if there is a problem with the content.
ā¢ī Video content does not play or does not play correctly if there is an error in the content or container.
ā¢ī Sound or video may not work if they have standard bit rates/frame rates above the TVās compatibility ratings.
ā¢ī If the Index Table is has an error, the Seek (Jump) function will not work.
ā¢ī When playing video over a network connection, the video may not play smoothly because of data transmission speeds.
ā¢ī While the TV is playing a video at the bit rate of 10 Mbps or higher, the menu screens may be displayed slowly.
ā¢ī Some USB/digital camera devices may not be compatible with the TV.
Video decoder Audio decoder
ā¢ī Supports up to H.264, Level 4.1 (FMO/ASO/RS are not supported.)
ā¢ī VC1 AP L4 is not supported.
ā¢ī GMC 2 or higher is not supported.
ā¢ī WMA 10 Pro supports up to 5.1 channels.
ā¢ī WMA lossless audio is not supported.
ā¢ī Vorbis supports up to 2ch.
Supported Subtitle Formats
ā¢ī External
Name File extension
MPEG-4 timed text .ttxt
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD .sub or .txt
SubStation Alpha .ssa
Advanced SubStation Alpha .ass
Powerdivx .psb
ā¢ī Internal
Name Container Format
Xsub AVI Picture Format
SubStation Alpha MKV Text Format
Advanced SubStation Alpha MKV Text Format
SubRip MKV Text Format
MPEG-4 Timed text MP4 Text Format
Supported Photos Formats
File Extension Type Resolution
*.jpg
*.jpeg
JPEG 15360 X 8640
*.bmp BMP 4096 X 4096
*.mpo MPO 15360 X 8640
Supported Music Formats
File Extension Type Codec Remark
*.mp3 MPEG MPEG1 Audio Layer 3
*.m4a
*.mpa
*.aac
MPEG4 AAC
*.ļ¬ac FLAC FLAC
Supports up to 2 channels
*.ogg OGG Vorbis
Supports up to 2 channels
*.wma WMA WMA
Supports up to 10 Pro 5.1 channels.
WMA lossless audio is not supported.
Supports up to the M2 proļ¬le.
*.wav wav wav
*.mid
*.midi
midi midi
Supports type 0 and type 1.
Seek is not supported.
Supports USB device only.
English - 18
[J4000-ZS]BN68-07048T-00L02.indb 18 2015-04-20 ļæ½ļæ½ 11:07:36
This page is intentionally
left blank.
[J4000-ZS]BN68-07048T-00L02.indb 19 2015-04-20 ļæ½ļæ½ 11:07:36
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Almacenamiento y mantenimiento
ā
Si ha pegado algunas pegatinas en la pantalla del televisor, al extraerlas quedarĆ”n restos. Limpie la pantalla para ver televisiĆ³n.
ā
La parte exterior y la pantalla del producto podrĆan rayarse durante la limpieza. AsegĆŗrese de limpiar la parte exterior y la pantalla
utilizando un paƱo suave para evitar que se rayen.
No rocĆe agua directamente sobre el producto. Cualquier lĆquido que ingrese al producto puede ocasionar
fallas, incendio o descarga elƩctrica.
Limpie el producto con un paƱo suave humedecido con una pequeƱa cantidad de agua. No utilice lĆquidos
inļ¬amables (como benceno o solventes) ni agentes limpiadores.
Licencia
Fabricado bajo licencia de Dolby Laboratories. Dolby y el sĆmbolo de doble D son marcas comerciales de Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with
the Symbol, DTS Premium Sound, DTS Digital Surround, and DTS Express are registered trademarks or trademarks of DTS, Inc. in the
United States and/or other countries. DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in
combination with the Symbol, and DTS Studio Sound are registered trademarks or trademarks of DTS, Inc. in the United States and/or
other countries. Ā© DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Deļ¬nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
This DivX Certiļ¬edĀ® device has passed rigorous testing to ensure it plays DivXĀ® video.
To play purchased DivX movies, ļ¬rst register your device at vod.divx.com. Find your registration code in the DivX VOD section of your
device setup menu.
DivX Certiļ¬edĀ® to play DivXĀ® video up to HD 1080p, including premium content.
DivXĀ®, DivX Certiļ¬edĀ® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
This device supports DivX Plus StreamingĀ® for enjoying HD movies and TV shows with advanced features (multi-language subtitles,
multiple audio tracks, chapters, smooth FF/RW, etc.) streamed to your device.
Open Source License Notice
Open Source used in this product can be found on the following webpage.
(http://opensource.samsung.com) Open Source License Notice is written only English.
EspaƱol - 16
[J4000-ZS]BN68-07048T-00L02.indb 16 2015-04-20 ļæ½ļæ½ 11:07:44
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Samsung UE49M5000 User manual
-
Samsung UA28F4000AJ User manual
-
-
Samsung UN32J4000DK User manual
-
-
Samsung UA32N5000AU User manual
-
-
-
-