If this screen does not appear in 30 - 45 seconds (look to the light
on your CD ROM drive for an indication of disk activity), you can
run the install program by doing the following...
In Windows 95/98: Click on the START button and choose
RUN. When presented with the RUN dialog box, type in the
following...
D:\setup.exe
(where D = the drive letter
assigned to your CD-ROM drive) Then, press the OK button,
and you will be presented with the install screen. Follow the
on screen instructions carefully to install your Voyetra
Software. When asked, your serial number can be found on
the enclosed Voyetra Registration Card.
In Windows 3.x: In Program Manager, select FILE/RUN, and
when presented with the RUN dialog box, type in the
following in the Command Line... D:\setup.exe
(where D = the drive letter assigned to your CD-ROM drive)
Then, press the OK button, and you will be presented with
the install screen. Follow the on screen instructions carefully
to install your Voyetra Software. When asked, your serial
number can be found on the enclosed Voyetra Registration
Card.
CONFIGURATION:
Voyetra has provided an excellent configuration and
troubleshooting program called Media Check, which will take you
through the complete setup procedure. It is highly recommended
that you run this program before using your Voyetra software, as it
will help you avoid configuration difficulties.
This can be found in your DISCOVERING KEYBOARDS program
group. Please double click the Media Check Icon to run the
program. Follow the instructions carefully, as the Voyetra Media
Check software configures your sound and MIDI connections.
RUN (FINALLY. FUN!):
Select the Discovering Keyboards or MIDI Orchestrator Plus
program by double clicking the appropriate Icon in the
DISCOVERING KEYBOARDS program group. If you wish to run
Discovering Keyboards, please remember that your Voyetra's
Discovering Keyboards/MIDI Orchestrator Plus CD-ROM will
need to be in your CD-ROM drive every time you run this program.