Whistler WIC-3509P User manual

The Whistler Group Corporate Headquarters

3604 NW Frontage Rd. • Bentonville, AR 72712

Tel 479.273.6012 • Fax 479.273.2927

Customer Return Center

551 N. 13th St. • Rogers, AR 72756

Customer Service Tel 800.531.0004

Please read this User Manual carefully before using the product!

www.whistlergroup.com

Version No.: 1.0

Model No.: WIC-3509P

Wireless Inspection Camera

with Recording Color LCD Monitor

Welcome

Packing List

Component/Controls

Installation

Operation

Basic Operation

Other Operations & Settings For Monitor

Record Video

Take Photo

Play Video/Feature

Delete Video/Feature

Delete Folder

Language Setting

Video System Setting

Format

Default Setup

View Version Information

Frame Rate Setting

Time Stamp Setting

Recording Type

Date/Time Setting

Event Playback

Specifications

Caution

Warranty

Accessories

FCC Information

1

2

3

4

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

Back Cover

Thank you for choosing our wireless inspection camera. Please read the

user manual carefully before using this product. This product is designed

as a remote inspection device. It can be used to look into tight spots and

wirelessly transmit real-time video to the monitor. Typical applications

include HVAC, automotive inspection, cable routing, etc.

If you have questions concerning the operation of this Whistler product,

please call:

Please keep the receipt in a safe place. You may register your product online at

www.whistlergroup.com. For warranty verification purposes, a copy of your dated

store receipt must accompany any unit sent in for warranty work. If the unit

is returned without a dated store receipt, an out of warranty service charge

applies. Note: Your warranty period begins at the time of purchase. The

warranty is validated only by dated store receipt! Please record the serial

numbers (located on the back of the monitor and inside the grip’s battery

compartment door) in the space provided in the warranty section of the manual.

Enjoy your Whistler Inspection Camera.

Sincerely,

The Whistler Group, Inc.

Customer Service

1-800-531-0004

Monday - Friday • 8:00 am - 5:00 pm CT

or visit our website:

www.whistlergroup.com

- 1 -

Magnetic Swivel

Mount

9mm Camera with

3 ft. tube

Power AdapterAdapter Cable

Magnet Accessory

Clip

Hook Accessory

Clip

Mirror Accessory

Clip

Handheld Grip

3.5 in. LCD Monitor

Accessory Collar

- 2 -

COMPONENTS / CONTROLS

- 3 -

3. Reinstall battery compartment, cover, and screw.

Install the batteries, camera tube, and micro SD card (optional)

before using product.

When connecting the camera tube to the handheld unit, make sure the keyed

ends are properly aligned. Once they are lined up, finger tighten the knob to

hold the connector in place.

Finger tighten the knurled knob

Engage Camera Tube Plug

and Grip Socket

- 4 - - 5 -

Install the Magnetic Swivel Mount

The magnetic swivel mount can be used to secure the monitor to a metal object.

Install the bracket as shown below.

The product also supports wired use by connecting the monitor to the camera.

The three included accessories (mirror, hook, and magnet) all attach

to the camera (image head) in the same manner. Slide the accessory

through the plastic holder, aligning it with the notch in holder.

Engage the “hook” on the accessory end with hole in the camera head.

Slide the plastic holder onto the camera head until it clicks to lock.

Notch

Image head

Accessory

Plastic Holder

Hole

Slide Plastic Holder

onto image head

Accessory Installed

- 5 -

playback.

on

Connect the adapter to the monitor and plug the adapter into a 110v AC

outlet. The power indicator will illuminate red or the battery capacity icon

will indicate charging, and will turn off after a full charge.

(Optional)

After the SD Card is inserted

properly, the monitor will indicate

icon; otherwise

icon will appear.

- 6 - - 7 -

ON OFF

Rotate the ON/OFF switch to turn on the camera. The power indicator

on top of the grip will illuminate. The intensity of the LEDs that surround

the camera on the imager head can be adjusted by rotating the switch.

on

the

Rotate the ON/OFF switch for

better image effect.

- 7 -

Gently guide the tube into the desired location. Slight adjustments can

be made while maneuvering the head in a forward direction.

The flexible tube can be bent to accommodate exploration in a

variety of locations.

1. During operation, press button to enter VIDEO mode:

- 8 -

During operation, press button to switch to photo mode:

- 8 - - 9 -

1. During operation, press button to display:

:

- 10 -

1. During operation, press button to display:

:

- 10 - - 11 -

to delete

selected file; press "NO" to exit.

To delete a folder, follow the same procedures as deleting a file. Make sure

the folder is empty, otherwise it will not delete and a warning will appear.

During operation, press and hold button for about 1-2 seconds to

enter into the setting interface:

:

- 12 -

:

- 12 - - 13 -

to

erase all data. Press "NO" to exit.

Press "NO" to exit.

:

- 14 - - 15 -

:

- 15 -

Select

“VIDEO”

or

“STILL”

:

- 16 -

- 16 - - 17 -

(Approximately)

- 18 - - 19 -

Page is loading ...

Whistler WIC-3509P User manual

This manual is also suitable for

Whistler WIC-3509P User manual

Related papers