Strait-Flex PP-500 Specification

PP-500
Strait-Flex
Brand
Strait-Flex
Model
PP-500
Type
Specification

This manual is also suitable for

Strait-Flex PP-500 is a large drywall patch designed for quick and easy repair of damaged drywall areas and mis-cuts. It outperforms metal patches and is pre-cut to fit standard receptacle boxes. Installation is simple using standard compounds, with no special tools or fasteners required. A second coat of compound can be applied immediately, requiring only a light skim-coat to finish.

Strait-Flex PP-500 is a large drywall patch designed for quick and easy repair of damaged drywall areas and mis-cuts. It outperforms metal patches and is pre-cut to fit standard receptacle boxes. Installation is simple using standard compounds, with no special tools or fasteners required. A second coat of compound can be applied immediately, requiring only a light skim-coat to finish.

Perma-Patch
Product Description
n Makes receptacle, ceiling and can light
relocation easy.
n Imprinted with standard design
patterns for easy use.
n Easily installs using standard
compounds. No special tools or
fasteners needed.
n Second coat of compound can be
applied immediately – very light
skim-coat to finish.
Applications
n Door knob damage
n Electrical receptacle
n Ceiling and can lights
n Drywall mis-cuts
Outlet-Patch
Product Description
n Pre-cut to fit standard receptacle boxes.
n Easily installs using standard
compounds. No special tools or
fasteners needed.
n Second coat of compound can be
applied immediately – very light
skim-coat to finish.
Applications
n Mis-cut or damaged areas around
receptacle boxes.
Outperforms
metal patches.
Strait-Flex patches
quickly repair
damaged drywall
areas and mis-cuts.
A C C E L E R A T E P E R F E C T I O N
perma
-
patch
outlet
-
patch
L A R G E D R Y W A L L P A T C H
E L E C T R I C A L O U T L E T P A T C H
Directions for Use
1 Lightly sand area to be repaired.
2 Apply drywall compound 1/4” thick directly to back of patch. Place patch over
center of repair and wipe down flat to wall with a taping knife. Immediately
skim-coat patch and let dry. Compound that remains on back side of
STRAIT-FLEX PATCHES makes patches very rigid.
3 Apply second coat, let dry and sand. STRAIT-FLEX PATCHES will not fuzz up
during sanding.
Perma-Patch Specifications
Outlet-Patch Specifications
Warranty
Strait-Flex products are backed by a lifetime warranty. When applied to a sound
structure, built on a permanent foundation using recommended application
techniques, we warrant that these products will not edge-crack for the lifetime of
the structure. Contact Strait-Flex International, Inc. for complete details.
Storage
Store in a dry place protected from moisture.
Endorsements
Strait-Flex products are endorsed by the IUPAT (International Union of Painters
and Allied Trades) of North America. Strait-Flex products are used in their
day-to-day training curriculums.
Check out our website at www.straitflex.com
STRAIT-FLEX InTERnATIonAL, InC. o’FALLon, Mo
phonE: 888.747.0220 FAX: 636.300.0414
STRAITFLEX.CoM
L630909
T E C H N I C A L D A T A
n 8” x 8” size.
n Color Code YELLOW
n Item# PP-2PK
n RETAIL PKG
2 patches per card.
50 packs per case.
Case weight: 10 lbs.
n 8” x 8” size.
n Color Code YELLOW
n Item# PP-100
n RETAIL PKG
10 patches per bag.
10 bags per case.
Case weight: 5.7 lbs.
n 8” x 8” size.
n Color Code YELLOW
n Item# PP-500
n WHOLESALE PKG
10 patches per bag.
50 bags per case.
Case weight: 27.5 lbs.
perma
-
patch
n 4-3/4” x 6-1/4” size.
n Color Code YELLOW
n Item# OP-2PK
n RETAIL PKG
2 patches per card.
50 packs per case.
Case weight: 4.2 lbs.
n 4-3/4” x 6-1/4” size.
n Color Code YELLOW
n Item# OP-100
n RETAIL PKG
10 patches per bag.
10 bags per case.
Case weight: 2 lbs.
n 4-3/4” x 6-1/4” size.
n Color Code YELLOW
n Item# OP-500
n WHOLESALE PKG
10 patches per bag.
50 bags per case.
Case weight: 9.2 lbs.
Step 1
Step 2
Step 3
outlet
-
patch
  • Page 1 1
  • Page 2 2

Strait-Flex PP-500 Specification

PP-500
Strait-Flex
Brand
Strait-Flex
Model
PP-500
Type
Specification
This manual is also suitable for

Strait-Flex PP-500 is a large drywall patch designed for quick and easy repair of damaged drywall areas and mis-cuts. It outperforms metal patches and is pre-cut to fit standard receptacle boxes. Installation is simple using standard compounds, with no special tools or fasteners required. A second coat of compound can be applied immediately, requiring only a light skim-coat to finish.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents