JWMGKJ WM-5000P5 User manual

Type
User manual

This manual is also suitable for

GUARD TOUR MANAGEMENT SYSTEM
USER’S MANUAL
WM-5000P5+
WM-5000P5+ Guard Tour System Users Manual
1. What is guard tour system?
A guard tour system is a system used to help companies and
organizations to organize, log and execute guard tours and patrols in
their assets ensuring that the officers will accomplish their tasks
within the predefined time intervals. There is a wide variety of guard
tour systems, which can be divided in two major categories: Wand
guard tour systems based on handheld devices and cloud guard tour
systems based on modern mobile and cloud technology. Guard tour
systems provide a means to check and record the time that a guard
executes his guard tour by scanning specific checkpoints assigned on
the area he patrols.
3. Functional Diagram
2. Applications
warehouse systems
improving rent a car systems
monitoring proper service
supervising personnel work time and place
monitoring scheduled technical maintenance
supervising guards
supervising service producers
supervising drivers
monitoring rent systems
airport protection and supervising workers
hotel protection and supervising workers
protection for other public institutions
Note:
Press left button 2 seconds to sending data and collect GPS checkpoint
Press right button 4 seconds to sending alarm
Working Prompts
P
ower on
The blue light lights 1 second and 2 vibrations
(Checkpoint Collect Mode
The blue light lights 1 second and 1 vibration
(
Patrol Mode
P
ower off
The blue light lights 2 seconds and 2 vibrations
S
tandby
The blue light flashes 1 time within 3 seconds
Low Power
The blue light flashes 2 times within 3 seconds
Charging
The blue light flashes 1 time within 1 second
Full Power
The blue light is always bright
Network registration
The green light flashes 1 time within 1 second
Registration
Successfully
The green light off and 1 vibration
Registration Failed
The green light off and 3 vibrations
Sending Data
The green light is always on.
Sending Successfully
The green light flash 5 times
and 1 vibration
Sending Failed
The green light off and
3 vibrations
GPS Positioning
The red light flashes 1 time within 1 second
Positioning
Successfully
The red light flash 5 times and 2 vibrations
Positioning Failed
3 vibrations
Collect RFID
checkpoint
The red light flash 5 times and 2 vibrations
Collect checkpoint is
full
3 vibrations
Reaching GPS
position
The red light lights 5 times and 1 vibration
The
data is almost full
5 vibrations
The data is already
full
The reader has 6 vibrations within 5 seconds
4. Technical Information
Model WM-5000P5+
Physical
Metal body with silicon shell outside
Dimensions
102mm*62mm*26mm
Weight
144g
Tag reading
RFID
Frequency
125KHz
Reading Distance
125KHz card: 3
-5cm
Operating Temperature
-
40 to +85
Storage Capacity
60,000 pieces records
Memory
16Mb Flash ROM
IP rating
IP67
Charging time
3 hours
Battery
3.7V Lithium Recharge Battery
Standby Time
28 Hours
Sending data for 70s intervals )、15
Hours
Sending data for 10s intervals
Communication
GPRS Communication 5320A:850/1900
5320E:900/2100
USB Cable
Humidity
10% to 90% non
-condensing
Wrong storage data
4 Vibrations
Wrong clock data
3 Vibrations
RFID Tags
5. System Components
1) WM-5000P5+ reader
2) USB Cable
3) Standalone Software
4) Charger
5) Holster
6) Checkpoint tags(optional purchase)
7) Guard Tags (optional purchase)
8) Event wallet (optional purchase)
1.7
6. User Flow
1) Make a sketch of the checking places that the guard needs to
check.
2) Install tags on each checking place.
*The round shape tag can be stuck or screwed on the wall.
*For the cylinder glass tag, make a hole in the wall, and then put it
inside and cover it.
3) Install software and make settings in software
4) The guard uses the reader to starts to patrol, he needs go to each
checking place and uses the reader to scan tags installed on the
wall.
5) The guard will press the reader left button for sending data or
send data automaticallyto the control center. The reader also can
transfer the data by the USB cable.
How to collect GPS position ?
1) Setting the read to checkpoint collect mode
2) The security guard take the WM-5000P5+ reader outside.
3) When he has arrived the GPS checking place where he wants
to patrol, then he will press the left button 2 seconds to
collect GPS position.
4) When the reader has 1 vibration, it means it collecting GPS
checkpoint.
5) When it was done ,the reader will record the GPS data
automatically.
6) After all collected, please change mode back to patrol mode.
Note : Once GPS checkpoint collection will take 30 seconds,
please be patient.
7. Warranty Policy
(1) All products are strictly tested and qualified before sale.
(2) Hardware devices sold by our company are covered by 5 Year parts
warranty.
(3) During 5 Year warranty period, we will replace or repair units
without charge, subject to any problem coming from product itself
under ordinary usage condition. The 5 Year warranty period
begins when the new products are received by customer. We
warrant its remanufactured products and non-warranty repair to
hardware from defects in material and workmanship for a period
of 90 days. The 90 days warranty period begins the date when
repair or remanufactured product is shipped from us.
(4) This warranty does not apply on batteries and extra parts. This
warranty is invalid if the product has been damaged by accident,
abuse, misuse, product end of life, or misapplication or has been
dismantled or repaired without the written permission of our
company.
(5) In any condition, freight will be paid by customer.
Thank you so much for choosing our guard tour system! If you have
any question on our product, please feel free to contact us or local
dealer and we still try our best to help you!
JWM Hi-Tech Development Co., Ltd
TEL: 0086 24 83782790
Web: http://www.jwm-rfid.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

JWMGKJ WM-5000P5 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI