Vitek VT-TPTZ10HR-5N User manual

VITEK

VT-TPTZ10HR-5N

VT-TPTZ18HR-5N

5.0 MegaPixel H.265 Network IP PTZ

Cameras with IR LED Illumination

• 1/3” 5.0 MegaPixel CMOS Sensor

• 2592x1944 @ 15fps / 2592x1520 @ 22fps

• H.265/H.264/MJPEG Triple Streaming

• True Day/Night by IR Cut Filter

• Built-in 5mm to 50mm Lens offering 10x Optical Zoom (VT-TPTZ10HR Models)

/ Built-in 4.8mm to 84mm Lens offering 18x Optical Zoom (VT-TPTZ18HR-5N)

• 6 Integrated IR LEDs with up to 165’ IR Range (VT-TPTZ10HR Models) / 10

Integrated IR LEDs with up to 500’ IR Range (VT-TPTZ18HR-5N)

• DigitalNoise Reduction

• 220 Presets programmed with view direction, zoom, BLC, etc

• Max manual speed 480°/sec

• 360°continuous rotation

• 16:9 Video format

• Double layer metal body construction with IP66 Weather Resistance

• Includes Wall Mount Bracket & Power Supply

• ONVIF Compliant

• 12VDC Operation

• 3 Year Warranty

FEATURES

VT-TPTZ10HR-5N

VT-TPTZ10HRF-5N

VT-TPTZ10HRC-5N

VT-TPTZ18HR-5N

OPTIONAL ACCESSORIES:

VT-TP T-CN MT

PTZ Corner

Mount Adapter

Bracket for

Transcendent

HD-TVI & IP

PTZ Cameras

VT-TKB D1

Transcendent

3D Network

IP Keyboard

Controller with

Integrated 5” HD

LED Real-Time

Display

VT-TPT-PLMT

PTZ Pole Mount

Adapter Bracket

for Transcendent

HD-TVI & IP

PTZ Cameras

VT-TP T-PDM1

PTZ Pedestal

Mount for Large

9” Transcendent

PTZ Cameras

VT-TP T-J B01

J-Box for cable

Management

for Large 9”

Transcendent

PTZ Cameras

Transcendent Series IP PTZ Cameras

2

WARNINGS AND CAUTIONS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR

OTHER OPENINGS ON THE EQUIPMENT.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to

alert the user to the presence of uninsulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instruction in the literature

WARNING

CAUTION

accompanying the product.

Transcendent Series IP PTZ Cameras

3

TABLE OF CONTENTS

1 PRODUCT INTRODUCTION ........................................................................................................................ 3

1.1 PACKAGE CONTENTS ............................................................................................................................... 3

1.2 FUNCTION DESCRIPTION ........................................................................................................................... 3

2 INSTALLATION .......................................................................................................................................... 4

2.1 INSTALLATION ........................................................................................................................................ 4

2.1.1 WALL MOUNTED ......................................................................................................................... 4

2.1.2 Corner Mounted (Optional) ......................................................................................................... 5

2.1.3 Pole Mounted (Optional) ............................................................................................................. 6

2.1.4 Ceiling Mounted (Optional) ......................................................................................................... 7

2.2.1 PTZ Connection............................................................................................................................ 9

2.2.3 Setting IE Browser ....................................................................................................................... 9

2.2.4 Install Active X ........................................................................................................................... 10

2.3.1 Video Browse ............................................................................................................................ 11

2.3.2 PTZ Control ................................................................................................................................ 12

2.3.3 PTZ Function .............................................................................................................................. 12

2.3.4 Common Shortcuts .................................................................................................................... 13

2.4 SETTING.............................................................................................................................................. 13

2.4.1 System....................................................................................................................................... 14

2.4.2 Network .................................................................................................................................... 16

2.4.4 Camera ...................................................................................................................................... 19

2.4.5 Video & Audio ........................................................................................................................... 22

2.4.6 PTZ Function .............................................................................................................................. 27

2.4.7 Alarm ........................................................................................................................................ 28

2.4.8 User ........................................................................................................................................... 28

2.4.9 log ............................................................................................................................................. 29

3. FUNCTION INSTRUCTION ....................................................................................................................... 29

3.1 SPECIAL FUNCTION ................................................................................................................................ 29

4 OSD MENU ............................................................................................................................................. 30

4.1 MENU INDEX ....................................................................................................................................... 30

.............................................................................................................................................................. 30

4.2 SYSTEM INFORMATION .......................................................................................................................... 31

4.3 DOME ................................................................................................................................................ 31

4.3.1 Communication ......................................................................................................................... 32

4.3.2 IR Display ................................................................................................................................... 32

4.3.3 Guard Tours ............................................................................................................................... 33

4.3.4 A-B Scan .................................................................................................................................... 33

4.3.5 Pan Scan .................................................................................................................................... 34

4.3.6 Pattern ...................................................................................................................................... 34

4.3.7 Park Action ................................................................................................................................ 34

4.3.8 Privacy Zone( Optional).............................................................................................................. 35

4.3.9 Advanced .................................................................................................................................. 36

4.4 CAMERA ............................................................................................................................................. 36

4.5 DISPLAY .............................................................................................................................................. 37

4.6 LANGUAGE .......................................................................................................................................... 37

4.7 TIMING TASK ....................................................................................................................................... 37

4.8 ALARM (OPTIONAL) .............................................................................................................................. 38

Transcendent Series IP PTZ Cameras

4

1 PRODUCT INTRODUCTION

1.1 PACKAGE CONTENTS

IP IR Speed dome 1pc

Wall mount bracket 1pc

Power supply 1pc

Screws kits 1pc

User manual 1pc

1.2 FUNCTION DESCRIPTION

3D Allocation

Allows the camera to move diagonally while using zoom function

Pattern

A series of pan, tilt, zoom and focus movements from a single programmable dome. Up

to 4 patterns may be programmed for the dome camera.

Auto Flip

When the Speed Dome camera is mounted, it can track a moving target in a

path directly below the camera. When the camera reaches the moving object directly below the

dome, the dome will rotate to keep the image in the correct view

Focus

The auto focus enables the camera to focus automatically to maintain a clear image. Under the

following conditions camera will not auto focus on the camera target:

(1) Target is not in the center of the screen;

(2) Attempting to view images that are far and near at the same time;

(3) Target is very bright object, such as neon lamp, etc;

(4) Targets are behind glass covered with water droplets or dust;

(5) Targets are moving quickly;

(6) Low contrast large area targets, such as walls;

(7) Targets are too dark or faint.

BLC (Back Light Compensation)

BLC(Back Light Compensation) is used to brighten an image in the foreground

with a bright area behind it such as sunlight, limiting the affect of silhouette

Iris Control

Factory default is automatic camera aperture; in this mode the camera senses changes in ambient

light and through moving and adjusting the lens aperture it makes the brightness of the output

image stable.

Ratio Speed

Intelligent pan and tilt speed is variable depend on the zoom factor. When zooming in, the speed

will become slower and when zooming out, the speed will become faster.

360 Scan

360° continuously scans the display scene at a set speed in a horizontal direction under the

condition that pitch angle remains the same. In the scanning status, operator can move the joystick

to exit from scanning.

Preset

A Position preset stores pan, tilt, zoom and focusing positions with predefined

camera presets. Position presets can be call directly, assigned to actions or

applied as “HOME” position.

Transcendent Series IP PTZ Cameras

5

Guard Tour Scan

Dome patrol scans according to certain edited preset order.

A-B Scan

The dome scans back and forth between two preset points (A & B).

Power Off Memory

This feature allows the dome to resume its previous status after power is restored.

Park Action

The Park function applies to the predefined functions such as Preset, Tour,

Pattern, or Scan function after the dome has been idle for a programmed time.

2 INSTALLATION

2.1 INSTALLATION

2.1.1 WALL MOUNTED

Installation conditions:

Wall mounted dome can be used in a hard wall structure whose thickness should be enough to

install expansion bolts in indoor and outdoor environment. The wall must bear at least 4 times

the weight of the dome.

Install wall hanging bracket:

Fig 2

b. As shown in Fig 3, Attach the wall bracket to the wall, then feed the cables through it.

Fig 3

Transcendent Series IP PTZ Cameras

6

2.1.2 Corner Mounted (Optional)

Fig 4

Installation conditions:

Corner mounted dome can be used in a hard wall structure with an angle of 90° whose thickness

should be enough to install expansion bolts in indoor and outdoor environments. The wall must

bear at least 4 times the weight of the dome. Install corner mounted attachment and wall hanging

bracket:

a. As shown in Fig5, with the installation holes in the corner mounted attachment as pattern, draw

locations on the wall with an angle of 90°and drill to install expansion bolt.

Fig 5

b. As shown in Fig6, use M8 screw nut to fix the base of corner mounted on the wall with all cables

through the center holes of the corner mounted, marine glue and bracket. Enough wiring length

should be left.

Fig 6

Transcendent Series IP PTZ Cameras

7

c. As shown in Fig7, fix the wall hanging bracket with all cables power through it on the corner

mounted attachment.

Fig 7

2.1.3 Pole Mounted (Optional)

Fig 8

Installation conditions:

Pole mounted domes can be used on a hard pole structure in indoor and outdoor environment

whose diameter should match the installation size of stainless hose clamps. Factory default is 6

inches stainless hose clamps (fit 5”-6” polls). The pole structure can bear at least 4 times the

weight of the dome. Install corner mounted attachment and wall hanging bracket:

a. As shown in Fig 9, use the stainless hose clamps to attach the pole mounted attachment with all

cable through it on the pole structure.

Fig 9

Transcendent Series IP PTZ Cameras

8

b. As shown in Fig 10, attach the wall hanging bracket with all cables through it on the pole

mounted attachment.

Fig 10

2.1.4 Ceiling Mounted (Optional)

Fig11

Installation conditions:

Ceiling mounted dome with thick pole can be used in the hard ceiling structure whose thickness

should be enough to install expansion bolt in indoor and outdoor environment. The ceiling can bear

at least 4 times the weight of the dome. Install the base of ceiling and boom:

a. As shown in Fig 12, with the installation holes in the base of ceiling as pattern, draw punched

locations in the ceiling and punch to install M6 expansion bolt.

Fig 12

Transcendent Series IP PTZ Cameras

9

b. As shown in Fig 13, at first unscrew the M4 screw at the side of the base of ceiling and split the

base of ceiling and boom. Then make the three groups of cables of power, video/control and

alarming into the side recessing seal groove of the ceiling connector bottom and through the core

hole of the base of ceiling mounted. Fix the base of hang ceiling on the ceiling board.

Fig 13

Note: If the dome is used in the outdoor conditions, use the silica gel on the faying surface of the

base of hang ceiling and the ceiling board and around the out-holes to be sure water proof

c. As shown in the Fig 14, tighten the boom with electrical wire and cable through it on the base of

ceiling and screw up the M4 screw.

Fig 14

Note: If the dome is used in the outdoor conditions, after using enough raw materials to wrap the

thread at the upper end of boom, tighten the boom on the base of ceiling. Use the silica gel around

the joint sleeve and connector of the boom to be sure water proof

Transcendent Series IP PTZ Cameras

10

2.2.1 PTZ Connection

Before connecting, please power off and read the instructions carefully of all connected devices.

2.2.2 Connecting the Device

This device can be directly connected to a computer or network;

2.2.3 Setting IE Browser

User can view video through IE, ActiveX is required to be installed.

1. From menu, click “tool”, then choose “Internet options”.

2. Then click “Security”:

Fig 2.13

3. Choose internet icon, click “Customs level”. Then the follow pops up:

Transcendent Series IP PTZ Cameras

11

Fig 2.14

4. Change option “Download unsigned ActiveX controls” to “Enable” or “Prompt”. User can

optionally change “Running ActiveX controls and plug-in” into “Start” to avoid the prompt of

running.

2.2.4 Install Active X

(1) Download controls

Open IE and enter IP cameras IP address (default is 192.168.1.110).

On home page of camera login using user name and password (default is admin & admin)

(2) Install and run controls:

Please click “Run” in the prompt box.

If it is the first time you are running the software, please login as a super user.

Transcendent Series IP PTZ Cameras

12

After login, you will enter the following interface:

Fig 2.16

The IP Camera supports H.265/H.265 and MJPEG triple encoding format.

2.3.1 Video Browse

Video Browse: For camera display setting, you can set the video type, video

size, play mode, image color. On the browsing interface, click “video”

to enter system setting interface. Here is the picture:

Fig 2.18

Set the video in the menu above:

Video Type: H.264/265 main stream, H.264 sub stream, MJPEG.

Video Size: screen original size 1*, original size *1/2, adaptive.

Play mode: Live, smooth.

Image Color: Fresh, Standard, Cold

Transcendent Series IP PTZ Cameras

13

2.3.2 PTZ Control

PTZ control: Adjust the rotation in all directions, set pan speed, tilt speed.

2.3.3 PTZ Function

PTZ functions: preset, auto pan, pattern, tour.

Fig 2.30

Transcendent Series IP PTZ Cameras

14

2.3.4 Common Shortcuts

Common shortcuts: Digital Zoom, Snapshot, record, audio input (not used), audio output (not

used), English- Chinese

Fig 2.21

Frequently set common functions of the IP camera. The storage path of snapshot and

recording complies with the one from settings .

The snapshots are stored in the name of IP address and time of the device. For example, the

file name is 20140520_221325_125_01_192.168.1.110.jpg, which means the device’s IP

address is 192.168.1.110 and snapshot’s time is at 22:13:25:125 on May 20

th

2014.

2.4 SETTING

Setting: detailed setting of system, network, IPC, audio & video, PTZ functions, alarm, user,

log.

Transcendent Series IP PTZ Cameras

15

2.4.1 System

System: upgrade the system info, time and maintenance.

System info: The initial interface of system setting is the display interface of system info.

Basic Info: The IPC’s version number, time zone, product series, serial number.

Network Settings: MAC address, IP address, default gateway, subnet mask.

Alarm setting: Alarm server IP, alarm correlation (not used).

NTP setting: NTP server IP.

Video setting: main stream/sub stream resolution, frame rate, bit rate, I/P rate.

MJPEG videosetting: resolution, frame rate.

Time: time zone setting, NTP setting, real-time synchronization parameter setting.

Fig 2.24

Time zone setting: select your time zone from the drop down list, click “Save”

NTP Synchronization: whether to start NTP service. Select to start NTP service,

If NTP service starts, input NTP server address in the IP field, and click

“Save” button. After NTP is activated, the system corrects the time with NTP automatically.

Local synchronization: set camera time to synchronize with local PC.

Advanced: contains upgrading the device’s software, restoring factory settings and restarting

the system.

Transcendent Series IP PTZ Cameras

16

Fig 2.25

Firmware upgrade: To upgrade the firmware of the camera click on Browse to locate the upgrade

file, after locating the file click on “Submit” and camera will start upgrading

Please restart the device after upgrading.

Restore factory setting: Click “Reset to reset camera to factory default. Check “Keep current IP

unchanged” to protect the cameras IP address

Reboot: click “Reboot” button to restart the camera, this will take about 90 seconds.

Transcendent Series IP PTZ Cameras

17

2.4.2 Network

Network: The device’s relevant network parameter setting, including Network

、

FTP

、

SMTP

、

QoS

、

IGMP

、

PORT, DDNS, Cloudlens

Network: setting of the device’s network parameter.

Fig 2.27

DHCP: Dynamic Host Configuration Protocol, allocating dynamic IP

address for network clients. Select “on”, the camera’s IP address and the subnet mask cannot

be modified, but automatically allocated by the host. Select “off” to manually set IP address

FTP: FTP (File Transfer Protocol) is application layer protocol, based on transport layer for

client’s service. FTP is in charge of transferring files. The IP camera supports FTP photo

uploading function on alarm. On FTP interface, set the server address, username and

password, activate FTP alarm at alarm setting.

Fig 2.28

Transcendent Series IP PTZ Cameras

18

SMTP: Simple Mail Transfer Protocol is a TCP/IP protocol used in sending and receiving e-mails

Fig 2.29

• Server IP: set up mail server IP.

• Port: set SMTP port

• SSL: on or off

• SSL Port: which port for SSL

• From: set up the email address of the sender.

• To: the recipient email address

• CC: copy to different email address

• Authentication: Turn on or off the authentication function via mail server verification.

• User name: Sender’s name. User can set by itself.

• Password: Set sender’s password.

• Snapshot: to attach a snapshot to the email

Note: No restrictions for setting username and password.

After setting, please click “Save”.

If the user selects “mail” at “Alarm Setting”, the system would send emails according to the

QoS: Quality of Service, a kind of network secure mechanism, a technology of solving network

delay and congestion.

Fig 2.32

Transcendent Series IP PTZ Cameras

19

IGMP: The Internet Group Management Protocol (IGMP) is a communications protocol used by

hosts and adjacent routers on IPv4 networks to establish multicast group memberships. IGMP is

an integral part of IP multicast.

Fig 2.33

PORT: an interface, passing data between the computer and other devices (e.g. Printer, mouse,

keyboard, monitors), among network, or other computers in connection.

Fig 2.34

DDNS:

DDNS: When enabled the HYBRID-DVR can be accessed through a dynamic DNS server.

Commonly used if a broadband connection does not have a static IP address.

.

Fig 2.35

Transcendent Series IP PTZ Cameras

20

2.4.4 Camera

Basic settings, Exposure settings, Effect settings, White Balance and Reset.

Basic Settings:

On and off setting of camera system, noise, mirror, BLC and other function.

Fig 2.38

Power Frequency: 60Hz = NTSC 50Hz = PAL

Vertical Mirror: image vertical mirror display.

Horizon Mirror: image horizontal mirror display.

BLC: BLC offers ideal exposure in front of strong backlight..

Digital WDR: improves image when object is both in bright and dark areas

Anti False color: helps improve color reproduction

Anti Fog: improves visibility in foggy conditions

Lens Shade Correction: when lens is zoomed out all the way edges might appear darker, this will

brighten up these edges.

Dig-Img Stabilizer: will reduce minor vibrations

Page is loading ...

Vitek VT-TPTZ10HR-5N User manual

Vitek VT-TPTZ10HR-5N User manual

Related papers

Other documents