TP-LINK Archer T2U User manual

Brand: TP-LINK

Model: Archer T2U

Type: User manual

TP-LINK Archer T2U is a wireless dual-band USB adapter that allows you to connect your computer to a wireless network. It supports both 2.4GHz and 5GHz bands, providing speeds up to 600Mbps. The adapter is easy to install and use, simply insert it into a USB port on your computer and follow the instructions to install the driver and utility. Once installed, you can use the utility to scan for available wireless networks, connect to a network, and view connection status.

a. Download the driver and utility from this

product’s Support page at

www.tp-link.com.

Note:

If your computer has a CD drive, you can also run the

included CD to install the driver and utility.

b. Unzip the downloaded folder and run the

Installer.pkg.

c. Follow the instructions to complete the

installation.

For Mac OS X

Insert the adapter into a USB port on your

computer directly.

uninstall.commandInstaller.pkg

SHELL

AC600 Wireless Dual Band

USB Adapter

MODEL NO. Archer T2U

Quick Installation Guide

1 Connect to a Computer 2 Install Driver and Utility 3 Join a Wireless Network

Wireless Utility

Profile Link Status Site Survey Statistics

WPS

About

AP List

Disconnected!!

RESCAN CONNECT ADD PROFILE

SSID

BSSID

Encr…

Authe…

Channel Network Type

Signal

TP-Link_XXXX 72 - 10 -18 - 01 - 00 - 03

TP-Link_TEST_

TP-Link_0903

TP-Link_0001_5 00 - 10 -18 - A9 - 5D - 8D

00 - 51 - E1 - 02 - 20 - 44

02 - 10 -18 - 01 - 00 - 02

4 11 WPA2- PS AES Infrastructure

Infrastructure

AES

NONE

WPA2- PS

Open

4842

a. Select the Site Survey tab of the pop-up

utility window.

b. Select your Wi-Fi network and click

CONNECT. The connection status can

be viewed on the Link Status screen.

a. Click the network icon ( or ) on the

taskbar.

b. Select your Wi-Fi network, click Connect

and enter the password when prompted.

For Windows

Insert the adapter into a USB port on your

computer directly.

1 Connect to a Computer

3 Join a Wireless Network2 Install Driver

Connections are available

Wireless Network Connection

Connect automatically

Connect

√

TP-Link_XXXX

TP-Link_XXXX_5G

This USB Adapter can only be powered by computers that comply

with Limited Power Source (LPS).

For detailed instructions, please refer to the

User Manual from this product’s Support

page at www.tp-link.com.

For technical support and other information,

please visit http://www.tp-link.com/support,

or simply scan the QR code.

7106507559 REV3.2.0

Note:

In Windows XP, a Found New Hardware Wizard window

will appear when the adapter is detected. Please click

Cancel.

a. Insert the CD and run the Autorun.exe.

Note:

You can also download the driver from this product’s

Support page at www.tp-link.com.

b. Select Archer T2U and follow the

instructions to complete the installation.

Note:

If you can’t install the driver successfully, disable the

antivirus software and firewall, then try again.

Archer T2UHArcher T2U

TP-LINK Archer T2U User manual

TP-LINK Archer T2U User manual

TP-LINK Archer T2U User manual

Related papers