ASSEMBLY INSTRUCTIONS:
STEP (1):
1. Take out the Lamp base (J) from the inner box.
Use the wrench (M) to remove the screw(R) / washer(S)
and throw away it
Step (2) : - Assembly the product
1. Secure pole(A) to base (J) by wrench (M) to
tighten the nut (K)&(L).
2.Screw tube (B) onto tube (A).
3.Insert part (C) into tube (B).
4.Screw part (D) into tube (B) to secure part (C).
5.Screw tubes (H), (I), (G) into poles of part (E).
6.Insert the hex screws (F)- 3 pieces clockwise
into poles of part (E) with wrench (M), and turn to
tighten for 3 pieces.
7.Insert the shade (O) onto socket (N), and then
turn the socket ring (P) onto socket (N) to secure
shade.
CAUTION:
Use only with maximum of 3*100 watt incandescent
bulbs or 3*26W CFL bulbs. (bulbs not included)
─ Must use all incandescent or all CFL bulbs.
IMPORTANT SAFETY INSTRUCTION
This portable lamp has a polarized plug as a feature to reduce the risk
of electric shock (one blade is larger than the other). This plug will fit in
a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not use with an extension cord unless the plug can be fully
inserted. Do not alter the plug in any way.
ASSEMBLY INSTRUCTIONS FOR
TRINITY ARC LAMP ITEM # 4238
/
