Wiremold 30TC-2V Installation guide

Brand: Wiremold

Model: 30TC-2V

Type: Installation guide

INSTALLATION

INSTRUCTIONS

Wiremold Electrical Systems conform to and

should be properly grounded in compliance with

requirements of the current National Code or

codes administered by local authorities.

All electrical products may represent a possible

shock or fire hazard if improperly installed or

used. Wiremold electrical products are UL list-

ed, made for interior use in dry locations only

and should be installed in conformance with cur-

rent local and/or the National Electrical Code.

TPB Gasketed Box

The Wiremold Company

60 Woodlawn Street, P.O. Box 332500

West Hartford, CT 06133-2500

Tel. (203) 233-6251 Fax 203-232-2062

40775 294

1. Remove cover to power

compartment (optional).

2. Remove entrance end fitting

by loosening two retaining

screws (only if necessary).

3. Attach Gasket to bottom of box.

4. Insert power wires through

Gasketed Box (small opening).

5. Install Gasketed Box and divider

with two self-tapping screws to

top of pole. Fasten Gasketed

cover with four machine screws

to top of box.

6. Replace power cover.

7. Install power pole per

instructions (included with

power pole).

USED WITH:

25DTP Series

AMDTP Series

Cover mtg. screws

Gasketed box cover

Divider & box

mtg. screws

Divider

Box

Gasket

Aluminum or steel

power pole

Power compartment cover

Wiremold 30TC-2V Installation guide

Wiremold 30TC-2V Installation guide

Wiremold 30TC-2V Installation guide

Related papers

Other documents