American Standard 2773.002.020 Specification

Brand: American Standard

Model: 2773.002.020

Category: Sanitary ware

Type: Specification

This manual is also suitable for

CADET™ 6’ X 36”

WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

CADET™ 6’ X 36” WHIRLPOOL & BATHING POOL

❏ 2773.018W Whirlpool featuring System I

• Acrylic with fiberglass reinforcement

• Pre-leveled tub bottom

• Form-fitted backrest position

• Dual, molded in arm rests

• 2.0 HP single speed, self-draining pump/motor

• Factory installed power cord with plug

• Eight multi-directional and flow-adjustable

jets including:

- Two Ideal-flow jets

- Four body massage jets

- Two recessed back-rest jets

• Deck-mounted air switch On/Off

• Two silent air volume controls

• Quick Connect Safe-T-Heater connection

system

• Factory installed and tested whirlpool system

❏ 2773.018WC Stay Clean™ Whirlpool Massage

Featuring System I:

• Same as 2773.018W except with the

StayClean™ whirlpool system featuring

Antimicrobial AlphaSan®

❏ 2773.002 Bathing Pool only

Nominal Dimensions: 1829 x 908 x 502mm

(72” x 35-3/4” x 19-3/4")

BV-23

NOTE: Roughing-in dimensions and product

specifications shown on reverse side of page.

Rev. 3/03

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• Underwriters Laboratories - Hydromassage

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

To Be Specified - Required:

❏ Color:

❏ Bath Filler: (specify finish)

❏ Bath Drain: 1583.470 (specify finish)

To Be Specified - Optional:

❏ Safe-T-Heater*: 9075.120

❏ 6 Foot Acrylic Apron: 9372.018 (specify color)

❏ 6 Foot Apron: 9272.018 (specify color)

❏ Jet Trim Ring Kit: 9860.200-two per kit

(Specify finish)

❏ Universal Tile Bead Kit: 751755-100

❏ Grab Bar Kit: 9822.200-two per kit (specify finish)

For color/finish availability and other faucet choices,

please see the Product Selector and Pricing Guide.

* NOTE: the Safe-T-Heater is designed to maintain water

temperature during operation. It will not heat cold water to

desired bathing temperature.

CADET™ 6’ X 36”

WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

464 mm

(18-1/4)

38 mm

(1-1/2)

502 mm

(19-3/4)

1-1/2 O.D.TAILPIECE

■ LEVELING STRINGER

NOT FOR SUPPORT

ROUGH

FLOOR

70mm

(2-3/4)

305mm

(12)

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

1651 & 1981mm

(65 & 78)

C/L OF

OVERFLOW

102 mm

(4)

C/L OF

SPOUT

C/L OF

VALVES

C/L OF

SHOWER ARM

70 mm

(2-3/4)

117 mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

INTEGRAL

SUPPORT

FEET

SAFE-T-HEATER

REMOVABLE

BLANK

RECOMMENDED FITTING LOCATION

64 X 330mm (2-1/2 x 13")

FOR PIER OR ISLAND

INSTALLATIONS ONLY

ALT. FITTING

LOCATION #1

1829 mm

(72)

908 mm

(35-3/4)

OUTLINE OF CUTOUT

1791 mm x 870 mm

(70-1/2 X 34-1/4)

454 mm

(17-7/8)

229mm

(9)

305 mm

(12)

57mm

(2-1/4)

(8) JETS

CUTOUT IN FLOOR

FOR DRAIN

PUMP

FINISHED

WALL

19 mm

(3/4)

229 mm

(9)

C/L OF

SUPPLIES

C/L OF DRAIN

SEE FITTING

SPECS FOR

DIMENSIONS

(2) AIR VALVES

ON/OFF

SWITCH

PROVIDE ACCESS TO PUMP FOR

SERVICING ON ALL INSTALLATIONS

RECOMMENDED FITTING LOCATION

64 X 330mm (2-1/2 x 13")

FOR PIER OR ISLAND

INSTALLATIONS ONLY

ALT. FITTING

LOCATION

464 mm

(18-1/4)

38 mm

(1-1/2)

502 mm

(19-3/4)

1-1/2 O.D.TAILPIECE

INTEGRAL

SUPPORT

FEET

■ LEVELING STRINGER

NOT FOR SUPPORT

ROUGH

FLOOR

1829 mm

(72)

908 mm

(35-3/4)

OUTLINE OF CUTO

1791 mm x 870 mm

(70-1/2 X 34-1/4)

454 mm

(17-7/8)

229mm

(9)

305 mm

(12)

57mm

(2-1/4)

70 mm

(2-3/4)

CUTOUT IN FLOOR

FOR DRAIN

FINISHED

WALL

305 mm

(12)

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

1651 & 1981mm

(65 & 78)

C/L OF

OVERFLOW

102 mm

(4)

C/L OF

SPOUT

C/L OF

VALVES

C/L OF

SHOWER ARM

70 mm

(2-3/4)

117 mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

19 mm

(3/4)

229 mm

(9)

C/L OF

SUPPLIES

C/L OF DRAIN

SEE FITTING

SPECS FOR

DIMENSIONS

72 x 35-3/4 x 19-3/4 In.(1829 x 908 x 502mm)

101 Lbs. (45 Kg.)

751 Lbs. (341 Kg)

78 Gal. (296 L.)

64 Gal. (243 L.)

23 x 49 In. (584 mm x 1245 mm)

65 x 29 In. (1651 x 737 mm)

13-1/2 In. (343 mm)

40 Lbs./Sq. Ft. (190 Kgs/Sq. m.)

23.8

48.3

GENERAL SPECIFICATIONS FOR 2773 WHIRLPOOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

MIN. OPERATING GAL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

2.1 HP, 14.4 AMPS, 120V.SYSTEM I PUMP

72 x 35-3/4 x 19-3/4 In.

(1829mm x 908 mm x 502mm)

76 Lbs. (34 Kg.)

725 Lbs. (326 Kg.)

78 Gal. (296 L.)

23 x 49 In. (584 mm x 1245 mm)

65 x 29 In. (1651 x 737 mm)

13-1/2 In. (343 mm)

38 Lbs./Sq. Ft. (183 Kgs/Sq. m.)

23.8

48.3

GENERAL SPECIFICATIONS FOR 2773 BATHING POOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA

TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT

REQUIRED. ENCLOSING MATERIAL BY OTHERS.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL

INFORMATION.

OPTIONAL 3 WALL TILING BEAD. KIT AND APRON No. 9272.018 or 9372.018 AVAILABLE AND MUST BE

ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT:

Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI

Standard Z124.1

These measurements are subject to change or cancellation. No responsibility is assumed for use of

superseded or voided leaflet.

■

American Standard 2773.002.020 Specification

Brand: American Standard

Model: 2773.002.020

Category: Sanitary ware

Type: Specification

This manual is also suitable for

Download PDF

report

American Standard 2773.002.020 Specification

This manual is also suitable for

American Standard 2773.002.020 Specification

Related papers