Panasonic KX-TG6074 User manual

Operating instructions

5.8 GHz Expandable Digital Cordless Answering System

ModelNoKX-TG6071

with 2 Handsets

ModelNoKX-TG6072

with 3 Handsets

ModelNoKX-TG6073

5.8 GHz Digital Cordless Answering System

with 4 Handsets

ModelNoKX-TG6074

Model shown is KX-TG6071.

This unit is compatible with Caller ID. To use this feature, you must

subscribe to the appropriate service offered by your telephone service

provider.

Please read these Operating Instructions before using the unit and save for

future reference.

For assistance, visit our website:

http:llwww.panasonic.comlhelp for customers in the U.S.A. or Puerto

Rico.

Table of Contents

Introduction

Product information .............. 3

Accessory information ............ 4

Important safety instructions ....... 6

For best performance ............ 8

Preparation

Setting up the base unit ........... 9

Setting up the handset ........... 9

Controls ...................... !2

Display ....................... 13

Setting the unit before use ....... 13

Making/Answering Calls

Making calls ................... 15

Answering calls ................ !6

Useful features during a call ...... 17

Phonebook

Handset phonebook ............ 20

Copying handset phonebook

items ........................ 21

Caller ID Service

Using Caller ID service .......... 22

Caller list ..................... 23

Programming

Programmable settings .......... 25

Answering System

Answering system .............. 30

Turning the answering system

on/off ........................ 30

Greeting message .............. 31

Listening to messages using the base

unit ......................... 31

Listening to messages using the

handset ...................... 32

Voice memo .................. 33

Remote operation .............. 33

Answering system settings ....... 34

Voice Mail Service

Using Voice Mail service ......... 36

Multi-unit Operation

Intercom ..................... 38

Transferring calls, conference

calls ......................... 38

Registering a handset ........... 39

Useful Information

Wall mounting ................. 40

Headset (optional) .............. 42

Lanyard/strap eyelet ............ 42

Error messages ................ 43

Troubleshooting ............... 44

FCC and other information ....... 48

Specifications ................. 51

Customer services ............. 52

Warranty ..................... 53

Index

Index ........................ 55

2 For assistance, please visit http://www.panasonic.com!hetp

Introduction

Product information

Thank you for purchasing a Panasonic cordless telephone.

These operating instructions can be used for the following models:

KX-TG6072KX-TG6071

KX-TG6073 KX-TG6074

Special features

• Handset voice enhancer

This feature clarifies the voice of the person you are talking to, reproducing a more

natural-sounding voice that is easier to hear and understand (page 18).

• Talking Caller ID

This feature allows the handset to announce the displayed caller name or phone

number when a call is received (page 22).

• Slow Talk®

You can slow down the voice of the person you are talking to, making it easier to

hear and understand (page 18).

For assistance, please visit http://www.panasonic.com!help 3

Introduction

Accessory information

Included accessories

® Telephone line PQJA10075 1 1 1 1

cord

® Wall mounting PQKL10078Z2 1 1 1 1

adaptor

® Battery HHR-P107 1 2 3 4

® Handset cover *_ PQYNTG3032BR 1 2 - 4

PQYNTG6051SR - - 3

_) Charger PQLV30054ZB - ! - 3

PQLV30054ZS - - 2

0 AC adaptor for PQLV208 - 1 2 3

charger

"! The handset cover comes attached to the handset.

® ® ® ® ®

® ®

4 For assistance, please visit http://www.panasonic.com!hetp

Introduction

Additionallreplacement accessories

Rechargeable nickel metal hydride HHR-P107

(Ni-MH) battery

Accessory handset with charger KX-TGA600

Headset KX-TCA60, KX-TCA86, KX-TCA88HA,

KX-TCA92, KX-TCA93, KX-TCA94, or

KX-TCA95

T-adaptor KX-J66

Expanding your phone system

You can expand the phone system by

registering optional handsets to a single

base unit.

• A maximum of 4 total handsets

(included and optional) can be

registered to a single base unit.

• KX-TG6074: An additional handset

cannot be registered.

Sales and support information

• To order additional/replacement accessories, call 1-800-332-5368.

• TTY users (hearing or speech impaired users) can call !-866-605-!277.

For assistance, please visit http://www.panasonic.com!hetp 5

Introduction

Important safety

instructions

When using the product, basic safety

precautions should always be followed

to reduce the risk of fire, electric shock,

or personal injury.

1. Read all instructions carefully.

2. Follow all warnings and instructions

marked on the product.

3. Unplug the product from power

outlets before cleaning. Do not use

liquid or aerosol cleaners. Use a

moist cloth for cleaning.

4. Do not use the product near water,

for example near a bathtub, wash

bowl, kitchen sink, etc.

5. Place the product securely on a

stable surface. Serious damage

and/or injury may result if the

product falls.

6. Do not cover slots and openings on

the product. They are provided for

ventilation and protection against

overheating. Never place the

product near radiators, or in a place

where proper ventilation is not

provided.

7. Use only the power source marked

on the product. Ifyou are not sure of

the type of power supplied to your

home, consult your dealer or local

power company.

8. Do not place objects on the power

cord. Install the product where no

one can step or trip on the cord.

9. Do not overload power outlets and

extension cords. This can result in

the risk of fire or electric shock.

10. Never push any objects through

slots in the product. This may result

in the risk of fire or electric shock.

Never spill any liquid on the product.

11. To reduce the risk of electric shock,

do not disassemble the product.

Take the product to an authorized

service center when service is

required. Opening or removing

covers may expose you to

dangerous voltages or other risks.

Incorrect reassembly can cause

electric shock when the product is

subsequently used.

12. Unplug the product from power

outlets and take to an authorized

service center when the following

conditions occur:

A. When the power cord is

damaged or frayed.

B. If liquid has been spilled into the

product.

C. Ifthe product has been exposed

to rain or water.

D. If the product does not work

normally by following the

operating instructions. Adjust

only controls covered by the

operating instructions. Improper

adjustment may require

extensive work by an authorized

service center.

E. Ifthe product has been dropped

or physically damaged.

F. If the product exhibits a distinct

change in performance.

13. During thunderstorms, avoid using

telephones except cordless types.

There may be a remote risk of an

electric shock from lightning.

14. Do not use the product to report a

gas leak, when in the vicinity of the

leak.

SAVE THESE

INSTRUCTIONS

6 For assistance, please visit http://www.panasonic.com!hetp

Introduction

WARNING:

• To prevent the risk of fire or electrical

shock, do not expose the product to

rain or any type of moisture.

• Unplug the product from power

outlets if it emits smoke, an abnormal

smell, or makes an unusual noise.

These conditions can cause fire or

electric shock. Confirm that smoke

has stopped emitting and contact the

Panasonic Call Center at 1-800-211-

PANA (! -800-2 ! 1-7262 ).

CAUTION:

Installation

• Never install telephone wiring during

a lightning storm.

• Never install telephone line jacks in

wet locations unless the jack is

specifically designed for wet

locations.

• Never touch uninsulated telephone

wires or terminals unless the

telephone line has been

disconnected at the network

interface.

• Use caution when installing or

modifying telephone lines.

• Do not touch the plug with wet hands.

eThe AC adaptor is used as the main

disconnect device. Ensure that the

AC outlet is installed near the product

and is easily accessible.

Battery

To reduce the risk of fire or injury to

persons, read and follow these

instructions.

• Use only the battery(ies) specified.

• Do not dispose of the battery(ies) in a

fire. They may explode. Check with

local waste management codes for

special disposal instructions.

• Do not open or mutilate the

battery(ies). Released electrolyte is

corrosive and may cause burns or

injury to the eyes or skin. The

electrolyte may be toxic if swallowed.

• Exercise care when handling the

battery(ies). Do not allow conductive

materials such as rings, bracelets or

keys to touch the battery(ies),

otherwise a short circuit may cause

the battery(ies) and/or the conductive

material to overheat and cause burns.

• Charge the battery(ies) provided, or

identified for use with the product

only, in accordance with the

instructions and limitations specified

in this manual.

Medical

• Consult the manufacturer of any

personal medical devices, such as

pacemakers or hearing aids, to

determine if they are adequately

shielded from external RF (radio

frequency) energy. (The product

operates in the frequency range of

5.76 GHz to 5.84 GHz, and the power

output is 200 mW (max.).) Do not use

the product in health care facilities if

any regulations posted in the area

instruct you not to do so. Hospitals or

health care facilities may be using

equipment that could be sensitive to

external RF energy.

For assistance, please visit http://www.panasonic.com!hetp 7

Introduction

For best performance

Base unit location/avoiding noise

The base unit and other compatible

Panasonic units use radio waves to

communicate with each other.

• For maximum coverage and noise-

free communications, place your

base unit:

- at a convenient, high, and central

location with no obstructions

between the handset and base unit

in an indoor environment.

- away from electronic appliances

such as TVs, radios, personal

computers, wireless devices or

other phones.

- avoid facing radio frequency

transmitters, such as external

antennas of mobile phone cell

stations (avoid putting the base unit

on a bay window or near a window).

• Coverage and voice quality depends

on the local environmental conditions.

• If the reception for a base unit location

is not satisfactory, move the base unit

to another location for better

reception.

Environment

• Keep the product away from electrical

noise generating devices, such as

fluorescent lamps and motors.

• The product should be kept free from

excessive smoke, dust, high

temperature, and vibration.

• The product should not be exposed to

direct sunlight.

• Do not place heavy objects on top of

the product.

• When you leave the product unused

for a long period of time, unplug the

product from the power outlet.

• The product should be kept away

from heat sources such as heaters,

kitchen stoves, etc. it should not be

placed in rooms where the

temperature is less than 5 °C (4! °F)

or greater than 40 °C (104 °F). Damp

basements should also be avoided.

• The maximum calling distance may

be shortened when the product is

used in the following places: Near

obstacles such as hills, tunnels,

underground, near metal objects such

as wire fences, etc.

• Operating the product near electrical

appliances may cause interference.

Move away from the electrical

appliances.

Routine care

• Wipe the outer surface of the product

with a soft moist cloth. Do not use

benzine, thinner, or any abrasive

powder.

8 For assistance, please visit http://www.panasonic.com!hetp

Preparation

Setting up the base

unit

Connecting the AC adaptor

and telephone line cord

Connect the telephone line cord until it

clicks into the base unit and telephone

line jack (O). Connect the AC adaptor

cord (I_) by pressing the plug firmly

(O).

• Use only the included Panasonic AC

adaptor PQLV203.

To single-line

telephone

O jack (RJ11C)

(120 V AC, 60 Hz)

Note:

• The AC adaptor must remain

connected at all times. (It is normal for

the adaptor to feel warm during use.)

• The AC adaptor should be connected

to a vertically oriented or floor-

mounted AC outlet. Do not connect

the AC adaptor to a ceiling-mounted

AC outlet, as the weight of the

adaptor may cause it to become

disconnected.

• The unit will not work during a power

failure. We recommend connecting a

corded telephone to the same

telephone line or to the same

telephone line jack using a Panasonic

T-adaptor (page 5).

If you subscribe to a DSL service

Please attach a noise filter (contact your

DSL provider) to the telephone line

between the base unit and the

telephone line jack in the event of the

following:

- Noise is heard during conversations.

- Caller ID features do not function

properly.

le-line

elephone

jack (RJ1 lC)

Noise filter

Setting up the handset

Connecting the AC adaptor

Available model:

KX-TG6072/KX-TG6073/KX-TG6074

• Use only the included Panasonic AC

adaptor PQLV208.

(1_20V AC, 60 Hz)

=

Bottom of the charger

Fasten the AC adaptor cord to

prevent it from being disconnected.

For assistance, please visit http://www.panasonic.com!hetp 9

Preparation

Battery installation/

replacement

1 Press the notch of the handset cover

firmly, and slide it in the direction of

the arrow.

• If necessary, remove the old

battery.

2 Insert the battery (O), and press it

down until it snaps into position (_).

Then close the handset cover (O,

O).

Important:

• Use only the rechargeable Panasonic

battery noted on page 5.

Attention:

A nickel metal hydride battery that is

recyclable powers the product you have

purchased.

Please call 1-800-8-BATTERY (1-800-

822-8837) for information on how to

recycle this battery.

Battery charge

Place the handset on the base unit or

charger for 7 hours before initial use.

• While charging, "Charging" is

displayed and the charge indicator on

the handset lights in amber. When the

battery is fully charged, "Charge

completed" iS displayed and the

indicator lights in green.

Base unit:

Charge

Charger:

Available model:

KX-TG6072/KX-TG6073/KX-TG6074

Note:

• If you want to use the handset

immediately, charge the battery for at

least 15 minutes.

10 For assistance, please visit http://www.panasonic.com!hetp

Preparation

• To ensure that the battery charges

properly, clean the charge contacts of

the handset, base unit, and charger

with a soft, dry cloth once a month.

Clean more often if the unit is subject

to the exposure of grease, dust, or

high humidity.

• When the battery is empty, "Charge

for 7h" is displayed and the charge

indicator does not light for about 5

minutes to concentrate on charging.

Battery level

Fully charged

Medium

Low

Flashing: needs to

be recharged.

r--R, Empty

Note:

• When the battery needs to be

charged, the handset beeps

intermittently during use.

Panasonic battery performance

While in use Up to 5 hours

(talking)

While not in use Up to ! 1 days

(standby)

While using the Up to 3 hours

clarity booster

feature (page 18)

Note:

• Battery operating time may be

shortened over time depending on

usage conditions and surrounding

temperature.

• Battery power is consumed whenever

the handset is off the base unit or

charger, even when the handset is not

in use.

• After the handset is fully charged,

displaying "Charge completed", it

may be left on the base unit or

charger without any ill effect on the

battery.

• The battery level may not be

displayed correctly after you replace

the battery. In this case, place the

handset on the base unit or charger

and let it charge for 7 hours.

Symbols used in these

operating instructions

[]

Button name/

soft key name

Example:

_Alarm _

Example:

[,]/[A]: "o_f"

The words in the

brackets indicate

button names/soft

key names on the

handset and base

unit.

Example:

Unit keys:

[_'%], [OFF]

Soft keys:

[View CID],

[Phonebook]

Proceed to the next

operation.

The words in

quotations indicate

the menu on the

display.

Press [v] or [A]to

select "off'.

For assistance, please visit http://www.panasonic.com!hetp 11

Preparation

Controls

Base unit

O Speaker

_) [MUTE]

O [FLASH] [CALL WAIT]

Q [CONF] (Conference)

_l [1_] (REPEAT) O

Q [GREETING REC] (Recording) _)

O [GREETING CHECK] O

O [ANSWER ON] Q

ANSWER ON indicator _)

(_) VOLUME [^] IV] 0

_) [MESSAGE] @

MESSAGE indicator O

_) [N_I] (SKIP) (_)

[ERASE] _)

_) [STOP] _)

_) [LOCATOR] [INTERCOM]

IN USE indicator

MIC (Microphone)

[MEMO] _)

_) [SP-PHONE] (Speakerphone) _)

SP-PHONE indicator

_) [HOLD] _)

_) [PAUSE] [REDIAL]

_) Charge contacts _)

12

Handset

@

Q

_-r- E

Speaker

Soft keys

Headset jack

["%] (TALK)

Navigator key ([A] Iv] [4] [._])

[_-] (SP-PHONE)

[-)(-] (TONE)

[FLASH] [CALL WAIT]

Microphone

Charge contacts

Lanyard/strap eyelet

Charge indicator

Ringer indicator

Message indicator

Receiver

Display

[MENU]

[OFF]

[PAUSE] [REDIAL]

[HOLD] [INTERCOM]

For assistance, please visit http://www.panasonic.com!hetp

Preparation

Using the navigator key

The handset navigator key can be used

to navigate through menus and to select

items shown on the display by pressing

[*], [,], [-,], or [,_].

Adjusting audio volume

Press [A] or [v] repeatedly while

talking.

[-,lO[,-I

[,:1

Using the soft keys

The handset features 2 soft keys. By

pressing a soft key, you can select the

feature shown directly above it on the

display.

Display

Setting the unit before

use

Important:

• To program features by scrolling

through the display menus, see page

25.

Display language

You can select either "English" or

"Sspa_.ol" as the display language.

The default setting is "English".

1 [MENU] _ [0][8][1]

2 [,]/[A]: Select the desired setting.

3 Press the right soft key to save.

[OFF]

Voice guidance language

You can select either "Sngli sh" or

"Sspa_ol" as the voice guidance

language of the answering system. The

default setting is "English".

1 [MENU] _ [0][8][2]

2 [,]/[A]: Select the desired setting.

3 [Save] _ [OFF]

Handset display items

itli_l) Voice enhancer is on.

Battery level

Example: The handset's

[1] extension number

(example shown here:

handset 1)

For assistance, please visit http://www.panasonic.com!hetp

13

Preparation

Dialing mode

If you cannot make calls, change this

setting according to your telephone line

service. The default setting is "Tone".

"Tone": For tone dial service.

"Pulse": For rotary/pulse dial service.

1 [MENU] _ [0][5][1]

2 [,]/[A]: Select the desired setting.

3 [Save] _ [OFF]

Date and time

Set the correct date and time.

- To use the available alarm function

(page 29).

- When you play back a message from

the answering system (page 31), the

unit announces the day and time it

was recorded.

1 [MENU] _ [4][1]

2 Enter the current month, day, and

year by selecting 2 digits for each.

Example: August !5, 2007

[0][8] [1][5] [0][7]

3 Enter the current hour and minute

(! 2-hour clock format) by selecting 2

digits for each.

Example: 9:30

[0][9] [3][0]

4 [AM/PM]: Select "AM" or "PM".

5 [Save] _ [OFF]

Note:

• If you make a mistake when entering

the date and time, press [4], [_],

[A], or [v] to move the cursor, then

make the correction.

• The date and time may be incorrect

after a power failure. In this case, set

the date and time again.

14 For assistance, please visit http://www.panasonic.com!hetp

Making/Answering Calls

Making calls

Using the handset

1 Dial the phone number.

eTo correct a digit, press [Clear].

2 Press [_%] or [Call].

3 When you finish talking, press [OFF]

or place the handset on the base unit

or charger.

Note:

• "Line in use" is displayed when

someone is talking on the unit or

another phone.

Using the speakerphone

1 Dial the phone number, and press

[<-].

• Speak alternately with the other

party.

2 When you finish talking, press

[OFF].

Note:

• Use the speakerphone in a quiet

environment.

• To switch to the receiver, press [_%].

Adjusting the receiver/speaker

volume

Press [A] or Iv] repeatedly while

talking.

Making a call using the redial list

The last 5 phone numbers dialed are

stored in the redial list (each 48 digits

max.).

1 [REDIAL]

2 [v]/[A]:Select the desired phone

number.

3 ["%]

Erasing a number in the redial list

1 [REDIAL]

2 [v]/[A]:Select the desired phone

number.

3 [Erase] _ [Yes] _ [OFF]

PAUSE button (for PBX/Iong

distance service users)

A pause is sometimes required when

making calls using a PBX or long

distance service. When storing a calling

card access number and/or PIN in the

phonebook, a pause is also needed

(page 21).

For example, if you need to dial the line

access number "9" when making

outside calls with a PBX:

1 [9] --_ [PAUSE] _ Dial the

phone number.

2 ["_]

Note:

• A 3.5 second pause is inserted each

time [PAUSE] is pressed. Press

repeatedly to insert longer pauses.

For assistance, please visit http://www.panasonic.com!hetp 15

Making/Answering Calls

Using the base unit

1 [SP-PHONE]

2 Dial the phone number.

3 When the other party answers,

speak into the MIC.

• Speak alternately with the other

party.

4 When you finish talking, press

[SP-PHONE].

Note:

• Use the speakerphone in a quiet

environment.

• While on a call, you can switch from

the base unit to the handset:

- Press [_'_] on the handset, then

press [SP-PHONE] on the base

unit.

- If the handset is on the base unit,

simply lift it.

Adjusting the speaker volume

Press [^] or [V] repeatedly while

talking.

Redialing the last number dialed

[SP-PHONE] _ [REDIAL]

Answering calls

When a call is being received, the ringer

indicator on the handset and the IN

USE indicator on the base unit flash

rapidly.

Using the handset

1 Press [='_] or [<-].

• You can also answer the call by

pressing any dial key from [0] to

[9], I-X--I, [_], or [INTERCOM].

(Any key talk feature)

2 When you finish talking, press

[OFF].

Note:

• You can change the ringer indicator

color and the ringer tone (page 28).

You can also adjust the handset

ringer volume (page 28).

Auto talk

This feature allows you to answer a call

by simply lifting the handset off the base

unit or charger. You do not need to

press [_'_ ]. To activate this feature, see

page 27.

Temporary ringer off

While the handset is ringing for an

outside call, you can turn the ringer off

temporarily by pressing [OFF].

Using the base unit

1 [SP-PHONE]

2 Speak into the MIC.

3 When you finish talking, press

[SP-PHONE].

Adjusting the ringer volume

Press [^] or [V] repeatedly to select

the desired volume.

• To turn the ringer off, press and hold

[V] until the unit beeps 2 times.

16 For assistance, please visit http://www.panasonic.com!hetp

Making/Answering Calls

Useful features during

a call

HOLD button

This feature allows you to put an

outside call on hold.

Press [HOLD] 2 times during an

outside call.

eTo release the hold, press [_%].

eThe base unit user can take the call

by pressing [SP-PHONE].

• Another handset user can take the

call by pressing [_%].

Press [HOLD] during an outside call.

• To release the hold, press

[SP-PHONE].

• Handset user can take the call by

pressing [_%].

Note for handset and base unit:

• While an outside call is on hold, the IN

USE indicator on the base unit

flashes.

• If another phone is connected to the

same line (page 9), you can also take

the call by lifting its handset.

• If a call is kept on hold for more than 6

minutes, an alarm tone starts to

sound. After 4 additional minutes on

hold, the call is disconnected.

Mute button

While mute is turned on,you can hear

the other party,but the other party

cannot hear you.

To mute your voice, press [Mute].

• To return to the conversation, press

[Mute] or [_%].

Note:

• When this feature is turned on,

[Mute] flashes.

• [Mute] is a soft key visible on the

handset display during a call.

To mute your voice, press [MUTE].

• To return to the conversation, press

[MUTE] or [SP-PHONE].

Note:

• When this feature is turned on, the

SP-PHONE indicator on the base unit

flashes.

FLASH button

Pressing [FLASH] allows you to use

special features of your host PBX such

as transferring an extension call, or

accessing optional telephone services

such as Call Waiting.

Note:

• To change the flash time, see page

28.

For assistance, please visit http://www.panasonic.com!hetp 17

Making/Answering Calls

For Call Waiting service

users

To use Call Waiting, you must subscribe

to Call Waiting service of your

telephone service provider.

This feature allows you to receive calls

while you are already talking on the

phone. If you receive a call while on the

phone, you will hear a Call Waiting tone.

Please contact your telephone service

provider for details and availability of

this service in your area.

Press [CALL WAIT] to answer the 2nd

call.

• To switch between calls, press

[CALL WAIT].

Temporary tone dialing (for

rotary/pulse service users)

You can temporarily switch the dialing

mode to tone when you need to access

touch tone services (for example,

answering services, telephone banking

services, etc.).

Press [-)(-] (TONE) before entering

access numbers which require tone

dialing.

Handset clarity booster

This feature can improve sound clarity

when the handset is used in an area

where there may be interference.

During an outside call, this feature is

turned on automatically when

necessary. You can also turn this

feature on or off manually.

1 Press [MENU] during an outside

call.

2 [v]/[A]: Select "Booster on" or

"Booster off". _ [Select]

Note:

• When this feature is turned on,

"BOOST" flashes.

eWhen this feature is turned off

manually during a call, itdoes not turn

on automatically during the same call.

• While this feature is turned on;

- the battery operating time is

shortened (page 11).

- the maximum number of extensions

that can be used at a time may

decrease.

Handset voice enhancer

This feature clarifies the voice of the

person you are talking to, reproducing a

more natura!-sounding voice that is

easier to hear and understand (page

28).

1 Press [MENU] during an outside

call.

2 [,]/[A]: Select"v._.. on"or"v.E.

off". _ [Select]

Note:

eWhen this feature is turned on, iqli_l)

is displayed.

• Depending on the condition and

quality of your telephone line, this

feature may emphasize existing line

noise. If it becomes difficult to hear,

turn this feature off.

Handset Slow Talk

This feature works to help slow down

the incoming audio when you are

having a conversation with an outside

party.

Important:

eYou cannot use this feature when;

- the handset announces names or

phone numbers while receiving a

call.

- you are on an intercom call.

18 For assistance, please visit http://www.panasonic.com!hetp

- youareonaconferencecall.

- youarelisteningtomessagesinthe

answeringsystem.

- anotherunitisusingtheanswering

system.

- anotherhandsetishavingan

intercomcallwiththebaseunit.

Toturnthisfeatureonoroff,press

[Slow]duringanoutsidecall.

Note:

eWhenthisfeatureisturnedon,

[Slow]flashes.

•Thisfeatureturnsoffifanother

handsetstartstohaveanintercom

callwiththebaseunit,oranotherunit

startstousetheansweringsystem.

•[Slow]isasoftkeyvisibleonthe

handsetdisplayduringacall.

• Thisfeatureturnsoffafteryouhang

upthecall.

• Thespeedmaybecomecloseto

normalwhenthehandsetreceives

constantincomingaudioforaperiod

oftime.

Call share

This feature allows the handset and

base unit to join an existing outside call.

To join the conversation, press [_%]

when the other extension is on an

outside call.

To join the conversation, press

[SP-PHONE] when the handset is on

an outside call.

Note for handset and base unit:

eA maximum of 4 parties (including 1

outside party) can join a conversation

using 3 extensions.

Making/Answering Calls

For assistance, please visit http://www.panasonic.com!hetp 19

Phonebook

Handset phonebook

You can add up to 50 items to the

handset phonebook and search for

phonebook items by name.

Adding items to the

phonebook

1 [Phonebook]

2 [Add]

3 Enter the name (max. 16

characters). _ [Next]

4 Enter the phone number (max. 32

digits). _ [Next] _ [Save]

• To add other items, repeat from

step 2.

5 [OFF]

Note:

• Caller ID subscribers can use ringer

ID and light-up ID features (page 23).

Character table for entering names

[1] &' ( ) - / 1

[2] a b c A B C 2

[3] d e f U E F 3

[4] g h i G H I 4

[5] k i d K L 5

[6] mn o MN O6

[7] p q r s P Q R S

[8] u v T U V 8

[9] w x y z WX Y Z 9

[0] 0 Space

[_] ,k

[_] #

• To enter another character that is

located on the same dial key, first

press [_] to move the cursor to the

next space.

Editing/correcting a mistake

Press [4] or [_] to move the cursor to

the character or number you want to

erase, then press [Clear]. Enter the

appropriate character or number.

• Press and hold [Clear] to erase all

characters or numbers.

Finding and calling a

phonebook item

Searching for a name alphabetically

by scrolling through all items

1 [Phonebook] --_ [Search]

2 [v]/[A]: Select the desired item.

3 Press [=%] to dial the phone

number.

Searching for a name by initial

1 [Phonebook] --_ [Search]

2 Press the dial key ([0] - [9], [_], or

[-X-]) that corresponds to the first

letter you are searching for (see the

character table, page 20).

Example: "LISA"

Press [5] repeatedly to display the

first phonebook entry starting with

the initial "L" and go to step 3.

• If there is no item corresponding to

the letter you selected, the next

item is displayed.

3 Press Iv] to select the desired item.

4 Press [=%] to dial the phone

number.

20 For assistance, please visit http://www.panasonic.com!hetp

Page is loading ...

Panasonic KX-TG6074 User manual

This manual is also suitable for

Panasonic KX-TG6074 User manual

Related papers

Other documents