Panasonic KX-TG6072 User manual

Category
Telephones
Type
User manual

This manual is also suitable for

Operating instructions
5.8 GHz Expandable Digital Cordless Answering System
ModelNoKX-TG6071
with 2 Handsets
ModelNoKX-TG6072
with 3 Handsets
ModelNoKX-TG6073
5.8 GHz Digital Cordless Answering System
with 4 Handsets
ModelNoKX-TG6074
Model shown is KX-TG6071.
This unit is compatible with Caller ID. To use this feature, you must
subscribe to the appropriate service offered by your telephone service
provider.
Please read these Operating Instructions before using the unit and save for
future reference.
For assistance, visit our website:
http:llwww.panasonic.comlhelp for customers in the U.S.A. or Puerto
Rico.
Table of Contents
Introduction
Product information .............. 3
Accessory information ............ 4
Important safety instructions ....... 6
For best performance ............ 8
Preparation
Setting up the base unit ........... 9
Setting up the handset ........... 9
Controls ...................... !2
Display ....................... 13
Setting the unit before use ....... 13
Making/Answering Calls
Making calls ................... 15
Answering calls ................ !6
Useful features during a call ...... 17
Phonebook
Handset phonebook ............ 20
Copying handset phonebook
items ........................ 21
Caller ID Service
Using Caller ID service .......... 22
Caller list ..................... 23
Programming
Programmable settings .......... 25
Answering System
Answering system .............. 30
Turning the answering system
on/off ........................ 30
Greeting message .............. 31
Listening to messages using the base
unit ......................... 31
Listening to messages using the
handset ...................... 32
Voice memo .................. 33
Remote operation .............. 33
Answering system settings ....... 34
Voice Mail Service
Using Voice Mail service ......... 36
Multi-unit Operation
Intercom ..................... 38
Transferring calls, conference
calls ......................... 38
Registering a handset ........... 39
Useful Information
Wall mounting ................. 40
Headset (optional) .............. 42
Lanyard/strap eyelet ............ 42
Error messages ................ 43
Troubleshooting ............... 44
FCC and other information ....... 48
Specifications ................. 51
Customer services ............. 52
Warranty ..................... 53
Index
Index ........................ 55
2 For assistance, please visit http://www.panasonic.com!hetp
Introduction
Product information
Thank you for purchasing a Panasonic cordless telephone.
These operating instructions can be used for the following models:
KX-TG6072KX-TG6071
KX-TG6073 KX-TG6074
Special features
Handset voice enhancer
This feature clarifies the voice of the person you are talking to, reproducing a more
natural-sounding voice that is easier to hear and understand (page 18).
Talking Caller ID
This feature allows the handset to announce the displayed caller name or phone
number when a call is received (page 22).
Slow Talk®
You can slow down the voice of the person you are talking to, making it easier to
hear and understand (page 18).
For assistance, please visit http://www.panasonic.com!help 3
Introduction
Accessory information
Included accessories
® Telephone line PQJA10075 1 1 1 1
cord
® Wall mounting PQKL10078Z2 1 1 1 1
adaptor
® Battery HHR-P107 1 2 3 4
® Handset cover *_ PQYNTG3032BR 1 2 - 4
PQYNTG6051SR - - 3
_) Charger PQLV30054ZB - ! - 3
PQLV30054ZS - - 2
0 AC adaptor for PQLV208 - 1 2 3
charger
"! The handset cover comes attached to the handset.
® ® ® ® ®
® ®
4 For assistance, please visit http://www.panasonic.com!hetp
Introduction
Additionallreplacement accessories
Rechargeable nickel metal hydride HHR-P107
(Ni-MH) battery
Accessory handset with charger KX-TGA600
Headset KX-TCA60, KX-TCA86, KX-TCA88HA,
KX-TCA92, KX-TCA93, KX-TCA94, or
KX-TCA95
T-adaptor KX-J66
Expanding your phone system
You can expand the phone system by
registering optional handsets to a single
base unit.
A maximum of 4 total handsets
(included and optional) can be
registered to a single base unit.
KX-TG6074: An additional handset
cannot be registered.
Sales and support information
To order additional/replacement accessories, call 1-800-332-5368.
TTY users (hearing or speech impaired users) can call !-866-605-!277.
For assistance, please visit http://www.panasonic.com!hetp 5
Introduction
Important safety
instructions
When using the product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
or personal injury.
1. Read all instructions carefully.
2. Follow all warnings and instructions
marked on the product.
3. Unplug the product from power
outlets before cleaning. Do not use
liquid or aerosol cleaners. Use a
moist cloth for cleaning.
4. Do not use the product near water,
for example near a bathtub, wash
bowl, kitchen sink, etc.
5. Place the product securely on a
stable surface. Serious damage
and/or injury may result if the
product falls.
6. Do not cover slots and openings on
the product. They are provided for
ventilation and protection against
overheating. Never place the
product near radiators, or in a place
where proper ventilation is not
provided.
7. Use only the power source marked
on the product. Ifyou are not sure of
the type of power supplied to your
home, consult your dealer or local
power company.
8. Do not place objects on the power
cord. Install the product where no
one can step or trip on the cord.
9. Do not overload power outlets and
extension cords. This can result in
the risk of fire or electric shock.
10. Never push any objects through
slots in the product. This may result
in the risk of fire or electric shock.
Never spill any liquid on the product.
11. To reduce the risk of electric shock,
do not disassemble the product.
Take the product to an authorized
service center when service is
required. Opening or removing
covers may expose you to
dangerous voltages or other risks.
Incorrect reassembly can cause
electric shock when the product is
subsequently used.
12. Unplug the product from power
outlets and take to an authorized
service center when the following
conditions occur:
A. When the power cord is
damaged or frayed.
B. If liquid has been spilled into the
product.
C. Ifthe product has been exposed
to rain or water.
D. If the product does not work
normally by following the
operating instructions. Adjust
only controls covered by the
operating instructions. Improper
adjustment may require
extensive work by an authorized
service center.
E. Ifthe product has been dropped
or physically damaged.
F. If the product exhibits a distinct
change in performance.
13. During thunderstorms, avoid using
telephones except cordless types.
There may be a remote risk of an
electric shock from lightning.
14. Do not use the product to report a
gas leak, when in the vicinity of the
leak.
SAVE THESE
INSTRUCTIONS
6 For assistance, please visit http://www.panasonic.com!hetp
Introduction
WARNING:
To prevent the risk of fire or electrical
shock, do not expose the product to
rain or any type of moisture.
Unplug the product from power
outlets if it emits smoke, an abnormal
smell, or makes an unusual noise.
These conditions can cause fire or
electric shock. Confirm that smoke
has stopped emitting and contact the
Panasonic Call Center at 1-800-211-
PANA (! -800-2 ! 1-7262 ).
CAUTION:
Installation
Never install telephone wiring during
a lightning storm.
Never install telephone line jacks in
wet locations unless the jack is
specifically designed for wet
locations.
Never touch uninsulated telephone
wires or terminals unless the
telephone line has been
disconnected at the network
interface.
Use caution when installing or
modifying telephone lines.
Do not touch the plug with wet hands.
eThe AC adaptor is used as the main
disconnect device. Ensure that the
AC outlet is installed near the product
and is easily accessible.
Battery
To reduce the risk of fire or injury to
persons, read and follow these
instructions.
Use only the battery(ies) specified.
Do not dispose of the battery(ies) in a
fire. They may explode. Check with
local waste management codes for
special disposal instructions.
Do not open or mutilate the
battery(ies). Released electrolyte is
corrosive and may cause burns or
injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
Exercise care when handling the
battery(ies). Do not allow conductive
materials such as rings, bracelets or
keys to touch the battery(ies),
otherwise a short circuit may cause
the battery(ies) and/or the conductive
material to overheat and cause burns.
Charge the battery(ies) provided, or
identified for use with the product
only, in accordance with the
instructions and limitations specified
in this manual.
Medical
Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of
5.76 GHz to 5.84 GHz, and the power
output is 200 mW (max.).) Do not use
the product in health care facilities if
any regulations posted in the area
instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
For assistance, please visit http://www.panasonic.com!hetp 7
Introduction
For best performance
Base unit location/avoiding noise
The base unit and other compatible
Panasonic units use radio waves to
communicate with each other.
For maximum coverage and noise-
free communications, place your
base unit:
- at a convenient, high, and central
location with no obstructions
between the handset and base unit
in an indoor environment.
- away from electronic appliances
such as TVs, radios, personal
computers, wireless devices or
other phones.
- avoid facing radio frequency
transmitters, such as external
antennas of mobile phone cell
stations (avoid putting the base unit
on a bay window or near a window).
Coverage and voice quality depends
on the local environmental conditions.
If the reception for a base unit location
is not satisfactory, move the base unit
to another location for better
reception.
Environment
Keep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
The product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
The product should not be exposed to
direct sunlight.
Do not place heavy objects on top of
the product.
When you leave the product unused
for a long period of time, unplug the
product from the power outlet.
The product should be kept away
from heat sources such as heaters,
kitchen stoves, etc. it should not be
placed in rooms where the
temperature is less than 5 °C (4! °F)
or greater than 40 °C (104 °F). Damp
basements should also be avoided.
The maximum calling distance may
be shortened when the product is
used in the following places: Near
obstacles such as hills, tunnels,
underground, near metal objects such
as wire fences, etc.
Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
Routine care
Wipe the outer surface of the product
with a soft moist cloth. Do not use
benzine, thinner, or any abrasive
powder.
8 For assistance, please visit http://www.panasonic.com!hetp
Preparation
Setting up the base
unit
Connecting the AC adaptor
and telephone line cord
Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (O). Connect the AC adaptor
cord (I_) by pressing the plug firmly
(O).
Use only the included Panasonic AC
adaptor PQLV203.
To single-line
telephone
O jack (RJ11C)
(120 V AC, 60 Hz)
Note:
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the
adaptor may cause it to become
disconnected.
The unit will not work during a power
failure. We recommend connecting a
corded telephone to the same
telephone line or to the same
telephone line jack using a Panasonic
T-adaptor (page 5).
If you subscribe to a DSL service
Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the
telephone line jack in the event of the
following:
- Noise is heard during conversations.
- Caller ID features do not function
properly.
le-line
elephone
jack (RJ1 lC)
Noise filter
Setting up the handset
Connecting the AC adaptor
Available model:
KX-TG6072/KX-TG6073/KX-TG6074
Use only the included Panasonic AC
adaptor PQLV208.
(1_20V AC, 60 Hz)
=
Bottom of the charger
Fasten the AC adaptor cord to
prevent it from being disconnected.
For assistance, please visit http://www.panasonic.com!hetp 9
Preparation
Battery installation/
replacement
1 Press the notch of the handset cover
firmly, and slide it in the direction of
the arrow.
If necessary, remove the old
battery.
2 Insert the battery (O), and press it
down until it snaps into position (_).
Then close the handset cover (O,
O).
Important:
Use only the rechargeable Panasonic
battery noted on page 5.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to
recycle this battery.
Battery charge
Place the handset on the base unit or
charger for 7 hours before initial use.
While charging, "Charging" is
displayed and the charge indicator on
the handset lights in amber. When the
battery is fully charged, "Charge
completed" iS displayed and the
indicator lights in green.
Base unit:
Charge
Charger:
Available model:
KX-TG6072/KX-TG6073/KX-TG6074
Note:
If you want to use the handset
immediately, charge the battery for at
least 15 minutes.
10 For assistance, please visit http://www.panasonic.com!hetp
Preparation
To ensure that the battery charges
properly, clean the charge contacts of
the handset, base unit, and charger
with a soft, dry cloth once a month.
Clean more often if the unit is subject
to the exposure of grease, dust, or
high humidity.
When the battery is empty, "Charge
for 7h" is displayed and the charge
indicator does not light for about 5
minutes to concentrate on charging.
Battery level
Fully charged
Medium
Low
Flashing: needs to
be recharged.
r--R, Empty
Note:
When the battery needs to be
charged, the handset beeps
intermittently during use.
Panasonic battery performance
While in use Up to 5 hours
(talking)
While not in use Up to ! 1 days
(standby)
While using the Up to 3 hours
clarity booster
feature (page 18)
Note:
Battery operating time may be
shortened over time depending on
usage conditions and surrounding
temperature.
Battery power is consumed whenever
the handset is off the base unit or
charger, even when the handset is not
in use.
After the handset is fully charged,
displaying "Charge completed", it
may be left on the base unit or
charger without any ill effect on the
battery.
The battery level may not be
displayed correctly after you replace
the battery. In this case, place the
handset on the base unit or charger
and let it charge for 7 hours.
Symbols used in these
operating instructions
[]
Button name/
soft key name
Example:
_Alarm _
Example:
[,]/[A]: "o_f"
The words in the
brackets indicate
button names/soft
key names on the
handset and base
unit.
Example:
Unit keys:
[_'%], [OFF]
Soft keys:
[View CID],
[Phonebook]
Proceed to the next
operation.
The words in
quotations indicate
the menu on the
display.
Press [v] or [A]to
select "off'.
For assistance, please visit http://www.panasonic.com!hetp 11
Preparation
Controls
Base unit
O Speaker
_) [MUTE]
O [FLASH] [CALL WAIT]
Q [CONF] (Conference)
_l [1_] (REPEAT) O
Q [GREETING REC] (Recording) _)
O [GREETING CHECK] O
O [ANSWER ON] Q
ANSWER ON indicator _)
(_) VOLUME [^] IV] 0
_) [MESSAGE] @
MESSAGE indicator O
_) [N_I] (SKIP) (_)
[ERASE] _)
_) [STOP] _)
_) [LOCATOR] [INTERCOM]
IN USE indicator
MIC (Microphone)
[MEMO] _)
_) [SP-PHONE] (Speakerphone) _)
SP-PHONE indicator
_) [HOLD] _)
_) [PAUSE] [REDIAL]
_) Charge contacts _)
12
Handset
@
Q
Q
_-r- E
Speaker
Soft keys
Headset jack
["%] (TALK)
Navigator key ([A] Iv] [4] [._])
[_-] (SP-PHONE)
[-)(-] (TONE)
[FLASH] [CALL WAIT]
Microphone
Charge contacts
Lanyard/strap eyelet
Charge indicator
Ringer indicator
Message indicator
Receiver
Display
[MENU]
[OFF]
[PAUSE] [REDIAL]
[HOLD] [INTERCOM]
For assistance, please visit http://www.panasonic.com!hetp
Preparation
Using the navigator key
The handset navigator key can be used
to navigate through menus and to select
items shown on the display by pressing
[*], [,], [-,], or [,_].
Adjusting audio volume
Press [A] or [v] repeatedly while
talking.
[-,lO[,-I
[,:1
Using the soft keys
The handset features 2 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
Display
Setting the unit before
use
Important:
To program features by scrolling
through the display menus, see page
25.
Display language
You can select either "English" or
"Sspa_.ol" as the display language.
The default setting is "English".
1 [MENU] _ [0][8][1]
2 [,]/[A]: Select the desired setting.
3 Press the right soft key to save.
[OFF]
Voice guidance language
You can select either "Sngli sh" or
"Sspa_ol" as the voice guidance
language of the answering system. The
default setting is "English".
1 [MENU] _ [0][8][2]
2 [,]/[A]: Select the desired setting.
3 [Save] _ [OFF]
Handset display items
itli_l) Voice enhancer is on.
Battery level
Example: The handset's
[1] extension number
(example shown here:
handset 1)
For assistance, please visit http://www.panasonic.com!hetp
13
Preparation
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
1 [MENU] _ [0][5][1]
2 [,]/[A]: Select the desired setting.
3 [Save] _ [OFF]
Date and time
Set the correct date and time.
- To use the available alarm function
(page 29).
- When you play back a message from
the answering system (page 31), the
unit announces the day and time it
was recorded.
1 [MENU] _ [4][1]
2 Enter the current month, day, and
year by selecting 2 digits for each.
Example: August !5, 2007
[0][8] [1][5] [0][7]
3 Enter the current hour and minute
(! 2-hour clock format) by selecting 2
digits for each.
Example: 9:30
[0][9] [3][0]
4 [AM/PM]: Select "AM" or "PM".
5 [Save] _ [OFF]
Note:
If you make a mistake when entering
the date and time, press [4], [_],
[A], or [v] to move the cursor, then
make the correction.
The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
14 For assistance, please visit http://www.panasonic.com!hetp
Making/Answering Calls
Making calls
Using the handset
1 Dial the phone number.
eTo correct a digit, press [Clear].
2 Press [_%] or [Call].
3 When you finish talking, press [OFF]
or place the handset on the base unit
or charger.
Note:
"Line in use" is displayed when
someone is talking on the unit or
another phone.
Using the speakerphone
1 Dial the phone number, and press
[<-].
Speak alternately with the other
party.
2 When you finish talking, press
[OFF].
Note:
Use the speakerphone in a quiet
environment.
To switch to the receiver, press [_%].
Adjusting the receiver/speaker
volume
Press [A] or Iv] repeatedly while
talking.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1 [REDIAL]
2 [v]/[A]:Select the desired phone
number.
3 ["%]
Erasing a number in the redial list
1 [REDIAL]
2 [v]/[A]:Select the desired phone
number.
3 [Erase] _ [Yes] _ [OFF]
PAUSE button (for PBX/Iong
distance service users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 21).
For example, if you need to dial the line
access number "9" when making
outside calls with a PBX:
1 [9] --_ [PAUSE] _ Dial the
phone number.
2 ["_]
Note:
A 3.5 second pause is inserted each
time [PAUSE] is pressed. Press
repeatedly to insert longer pauses.
For assistance, please visit http://www.panasonic.com!hetp 15
Making/Answering Calls
Using the base unit
1 [SP-PHONE]
2 Dial the phone number.
3 When the other party answers,
speak into the MIC.
Speak alternately with the other
party.
4 When you finish talking, press
[SP-PHONE].
Note:
Use the speakerphone in a quiet
environment.
While on a call, you can switch from
the base unit to the handset:
- Press [_'_] on the handset, then
press [SP-PHONE] on the base
unit.
- If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press [^] or [V] repeatedly while
talking.
Redialing the last number dialed
[SP-PHONE] _ [REDIAL]
Answering calls
When a call is being received, the ringer
indicator on the handset and the IN
USE indicator on the base unit flash
rapidly.
Using the handset
1 Press [='_] or [<-].
You can also answer the call by
pressing any dial key from [0] to
[9], I-X--I, [_], or [INTERCOM].
(Any key talk feature)
2 When you finish talking, press
[OFF].
Note:
You can change the ringer indicator
color and the ringer tone (page 28).
You can also adjust the handset
ringer volume (page 28).
Auto talk
This feature allows you to answer a call
by simply lifting the handset off the base
unit or charger. You do not need to
press [_'_ ]. To activate this feature, see
page 27.
Temporary ringer off
While the handset is ringing for an
outside call, you can turn the ringer off
temporarily by pressing [OFF].
Using the base unit
1 [SP-PHONE]
2 Speak into the MIC.
3 When you finish talking, press
[SP-PHONE].
Adjusting the ringer volume
Press [^] or [V] repeatedly to select
the desired volume.
To turn the ringer off, press and hold
[V] until the unit beeps 2 times.
16 For assistance, please visit http://www.panasonic.com!hetp
Making/Answering Calls
Useful features during
a call
HOLD button
This feature allows you to put an
outside call on hold.
Press [HOLD] 2 times during an
outside call.
eTo release the hold, press [_%].
eThe base unit user can take the call
by pressing [SP-PHONE].
Another handset user can take the
call by pressing [_%].
Press [HOLD] during an outside call.
To release the hold, press
[SP-PHONE].
Handset user can take the call by
pressing [_%].
Note for handset and base unit:
While an outside call is on hold, the IN
USE indicator on the base unit
flashes.
If another phone is connected to the
same line (page 9), you can also take
the call by lifting its handset.
If a call is kept on hold for more than 6
minutes, an alarm tone starts to
sound. After 4 additional minutes on
hold, the call is disconnected.
Mute button
While mute is turned on,you can hear
the other party,but the other party
cannot hear you.
To mute your voice, press [Mute].
To return to the conversation, press
[Mute] or [_%].
Note:
When this feature is turned on,
[Mute] flashes.
[Mute] is a soft key visible on the
handset display during a call.
To mute your voice, press [MUTE].
To return to the conversation, press
[MUTE] or [SP-PHONE].
Note:
When this feature is turned on, the
SP-PHONE indicator on the base unit
flashes.
FLASH button
Pressing [FLASH] allows you to use
special features of your host PBX such
as transferring an extension call, or
accessing optional telephone services
such as Call Waiting.
Note:
To change the flash time, see page
28.
For assistance, please visit http://www.panasonic.com!hetp 17
Making/Answering Calls
For Call Waiting service
users
To use Call Waiting, you must subscribe
to Call Waiting service of your
telephone service provider.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a Call Waiting tone.
Please contact your telephone service
provider for details and availability of
this service in your area.
Press [CALL WAIT] to answer the 2nd
call.
To switch between calls, press
[CALL WAIT].
Temporary tone dialing (for
rotary/pulse service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch tone services (for example,
answering services, telephone banking
services, etc.).
Press [-)(-] (TONE) before entering
access numbers which require tone
dialing.
Handset clarity booster
This feature can improve sound clarity
when the handset is used in an area
where there may be interference.
During an outside call, this feature is
turned on automatically when
necessary. You can also turn this
feature on or off manually.
1 Press [MENU] during an outside
call.
2 [v]/[A]: Select "Booster on" or
"Booster off". _ [Select]
Note:
When this feature is turned on,
"BOOST" flashes.
eWhen this feature is turned off
manually during a call, itdoes not turn
on automatically during the same call.
While this feature is turned on;
- the battery operating time is
shortened (page 11).
- the maximum number of extensions
that can be used at a time may
decrease.
Handset voice enhancer
This feature clarifies the voice of the
person you are talking to, reproducing a
more natura!-sounding voice that is
easier to hear and understand (page
28).
1 Press [MENU] during an outside
call.
2 [,]/[A]: Select"v._.. on"or"v.E.
off". _ [Select]
Note:
eWhen this feature is turned on, iqli_l)
is displayed.
Depending on the condition and
quality of your telephone line, this
feature may emphasize existing line
noise. If it becomes difficult to hear,
turn this feature off.
Handset Slow Talk
This feature works to help slow down
the incoming audio when you are
having a conversation with an outside
party.
Important:
eYou cannot use this feature when;
- the handset announces names or
phone numbers while receiving a
call.
- you are on an intercom call.
18 For assistance, please visit http://www.panasonic.com!hetp
- youareonaconferencecall.
- youarelisteningtomessagesinthe
answeringsystem.
- anotherunitisusingtheanswering
system.
- anotherhandsetishavingan
intercomcallwiththebaseunit.
Toturnthisfeatureonoroff,press
[Slow]duringanoutsidecall.
Note:
eWhenthisfeatureisturnedon,
[Slow]flashes.
Thisfeatureturnsoffifanother
handsetstartstohaveanintercom
callwiththebaseunit,oranotherunit
startstousetheansweringsystem.
[Slow]isasoftkeyvisibleonthe
handsetdisplayduringacall.
Thisfeatureturnsoffafteryouhang
upthecall.
Thespeedmaybecomecloseto
normalwhenthehandsetreceives
constantincomingaudioforaperiod
oftime.
Call share
This feature allows the handset and
base unit to join an existing outside call.
To join the conversation, press [_%]
when the other extension is on an
outside call.
To join the conversation, press
[SP-PHONE] when the handset is on
an outside call.
Note for handset and base unit:
eA maximum of 4 parties (including 1
outside party) can join a conversation
using 3 extensions.
Making/Answering Calls
For assistance, please visit http://www.panasonic.com!hetp 19
Phonebook
Handset phonebook
You can add up to 50 items to the
handset phonebook and search for
phonebook items by name.
Adding items to the
phonebook
1 [Phonebook]
2 [Add]
3 Enter the name (max. 16
characters). _ [Next]
4 Enter the phone number (max. 32
digits). _ [Next] _ [Save]
To add other items, repeat from
step 2.
5 [OFF]
Note:
Caller ID subscribers can use ringer
ID and light-up ID features (page 23).
Character table for entering names
[1] &' ( ) - / 1
[2] a b c A B C 2
[3] d e f U E F 3
[4] g h i G H I 4
[5] k i d K L 5
[6] mn o MN O6
[7] p q r s P Q R S
[8] u v T U V 8
[9] w x y z WX Y Z 9
[0] 0 Space
[_] ,k
[_] #
To enter another character that is
located on the same dial key, first
press [_] to move the cursor to the
next space.
Editing/correcting a mistake
Press [4] or [_] to move the cursor to
the character or number you want to
erase, then press [Clear]. Enter the
appropriate character or number.
Press and hold [Clear] to erase all
characters or numbers.
Finding and calling a
phonebook item
Searching for a name alphabetically
by scrolling through all items
1 [Phonebook] --_ [Search]
2 [v]/[A]: Select the desired item.
3 Press [=%] to dial the phone
number.
Searching for a name by initial
1 [Phonebook] --_ [Search]
2 Press the dial key ([0] - [9], [_], or
[-X-]) that corresponds to the first
letter you are searching for (see the
character table, page 20).
Example: "LISA"
Press [5] repeatedly to display the
first phonebook entry starting with
the initial "L" and go to step 3.
If there is no item corresponding to
the letter you selected, the next
item is displayed.
3 Press Iv] to select the desired item.
4 Press [=%] to dial the phone
number.
20 For assistance, please visit http://www.panasonic.com!hetp
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Panasonic KX-TG6072 User manual

Category
Telephones
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI