Edition E
Delivering the Moment
Selenio 6800™
HMX6803+ & OP+HMX+
8-AES Audio Multiplexer &
8-AES Audio Multiplexer with Fiber Output
175-100062-00
Installation and Operation Manual
Publicaon Informaon
© 2014 Imagine Communicaons Corp. Proprietary and Condenal.
Imagine Communicaons considers this document and its contents to be proprietary and condenal.
Except for making a reasonable number of copies for your own internal use, you may not reproduce this
publicaon, or any part thereof, in any form, by any method, for any purpose, or in any language other
than English without the wrien consent of Imagine Communicaons. All others uses are illegal.
This publicaon is designed to assist in the use of the product as it exists on the date of publicaon of this
manual, and may not reect the product at the current me or an unknown me in the future. This pub
-
licaon does not in any way warrant descripon accuracy or guarantee the use for the product to which
it r
efers. Imagine Communicaons reserves the right, without noce to make such changes in equipment,
design, specicaons, components, or documentaon as progress may warrant to improve the perfor
-
mance of the product.
Trademarks
6800+™, ADC™, CCS Navigator™, Channel ONE™, ChannelView™, ClipSync™, Delay™, D Series™, D Se-
ries DSX™, Deliver the Moment™, Delivering the Moment™, FAME™, Farad™, G8™, G Scribe™, HView™,
Ic
onMaster™, IconLogo™, IconStaon™, IconKey™, InfoCaster™, InfoCaster Creator™, InfoCaster Manag-
er™, InfoCaster Player™, InstantOnline™, Invenio®, Live Update™, mCAPTURE™, Magellan™, Magellan CCS
N
avigator™, Magellan Q SEE™, MulService SDN™, NetPlus™, NetVX™, NewsForce™, Nexio® G8™, Nexio
AMP® ChannelView™, Nexio® Channel ONE™, Nexio® ClipSync™, Nexio® Delay™, Nexio® Digital Turnaround
Processor™, Nexio® Farad™, Nexio® G Scribe™, Nexio® IconKey™, Nexio® IconLogo™, Nexio® IconMaster™,
Nexio® IconStaon™, Nexio® InfoCaster™, Nexio® InfoCaster Creator™, Nexio® InfoCaster Manager™,
Nexio® InfoCaster Player™, Nexio® InfoCaster Trac™, Nexio® InstantOnline™, Nexio® mCAPTURE™, Nexio®
NewsForce™, Nexio® NXIQ™, Nexio® Playlist™, Nexio® Remote™, Nexio®RTX Net™, Nexio® TitleMoon™,
Nexio® TitleOne™, Nexio® Velocity ESX™, Nexio® Velocity PRX™, Nexio® Velocity XNG™, Nexio® Volt™,
OPTO+™, Panacea™, Planum™, Playlist™, Predator II GRF™, Predator II GX™, Punctuate™, Remote™, RTX
Net™, QuiC™, Q SEE™, SD STAR™, Selenio™, Selenio 6800+™, SelenioNext™, Selenio X50™, Selenio X85™,
Selenio X100™, TitleMoon™, TitleOne™, Velocity ESX™, Velocity PRX™, Velocity XNG™, Versio™,
Videotek® SD STAR™, X50™, and X85™ are trademarks of Imagine Communicaons or its subsidiaries.
Altude Express®, Connectus®, Enabling PersonalizedTV®, ICE® Broadcast System, ICE Illustrate®,
ICE Q® algorithms, ICEPAC®, Imagine ICE®, Inscriber®, Inscriber® Connectus®, Invenio®, NEO®, Nexio®,
Nexio AMP®, PersonalizedTV®, RouterWorks®, Videotek®, Videotek® ASI STAR®, Videotek® GEN STAR®,
and Videotek® HD STAR® are registered trademarks of Imagine Communicaons or its subsidiaries.
Microso® and Windows® are registered trademarks of Microso Corporaon. HD BNC is a trademark of
Amphenol Corporaon. Some products are manufactured under license from Dolby Laboratories. Dolby
and the double D symbol are registered trademarks of Dolby Laboratories. DTS Neural audio products are
manufactured under license from DTS Licensing Limited. DTS and the Symbol are registered trademarks &
the DTS Logos are trademarks of DTS, Inc. © 2008 2010 DTS, Inc. All other trademarks and trade names are
the property of their respecve companies.
Contact Informaon
Imagine Communicaons has oce locaons around the world. For locaons and contact informaon see:
hp://www.imaginecommunicaons.com/contact us/
Support Contact Informaon
For support contact informaon see:
▪ Support Contacts: hp://www.imaginecommunicaons.com/services/technical support/
▪ eCustomer Portal: hp://support.imaginecommunicaons.com
© 2014 Imagine Communicaons Corp. Proprietary and Condenal
Edition F
April 2013
HMX6803+
8-AES Audio Multiplexer
OP+HMX+
8-AES Audio Multiplexer
With Fiber Output
Installation and Operation Manual
iii
Contents
Preface........................................................................................................................vii
Manual Information .....................................................................................................vii
Purpose ....................................................................................................................vii
Audience ..................................................................................................................vii
Revision History ........................................................................................................vii
Writing Conventions ................................................................................................ viii
Obtaining Documents .............................................................................................. viii
Unpacking/Shipping Information .............................................................................. viii
Unpacking a Product ............................................................................................... viii
Product Servicing .......................................................................................................ix
Returning a Product ...................................................................................................ix
References .....................................................................................................................ix
Safety Standards and Compliances .............................................................................xi
Restriction on Hazardous Substances (RoHS) Compliance ...........................................xi
Waste from Electrical and Electronic Equipment (WEEE) Compliance ..........................xi
Safety Terms and Symbols in this Manual .................................................................xii
Chapter 1 Introduction.............................................................................................................. 1
Product Description ....................................................................................................... 1
Main Features ............................................................................................................ 1
Optional Features ...................................................................................................... 2
OP+HMX+ Module Types ........................................................................................... 2
Hardware Options ..................................................................................................... 3
Module Descriptions ..................................................................................................... 3
Front Module ............................................................................................................ 3
Back Connectors ....................................................................................................... 4
Breakout Cables ........................................................................................................ 5
RS-422/232 Cable ..................................................................................................... 8
Signal Flow .................................................................................................................. 10
Chapter 2 Installation............................................................................................................. 11
Unpacking the Module ............................................................................................... 11
Checking the Packing List ........................................................................................ 11
Contents
iv
Choosing HMX6803+ and OP+HMX+ Upgrade Options ............................................12
Selecting an External Balun ......................................................................................12
Setting Jumpers ...........................................................................................................13
Setting Jumper CJ1 for Local or Remote Control ......................................................13
Setting Jumpers for 600Ω/Hi-Z Input Impedance Control .........................................13
Maximum 6800+ Frame Power Ratings ......................................................................14
Installing 6800+ Modules ............................................................................................15
Required Frames and Back Connector Types ............................................................15
Installing and Removing HMX6803+ Modules ..........................................................15
Installing OP+HMX+ Modules ...................................................................................16
Inspecting and Cleaning Fiber Optic Connections .....................................................18
Upgrading Module Firmware .....................................................................................20
Chapter 3 Operation..................................................................................................................21
Operating Notes ..........................................................................................................21
Q-SEE Compliant Thumbnails .....................................................................................21
Activating HMX6803+ and OP+HMX+ Functions .......................................................21
Adding a License Key ...............................................................................................22
Audio Test Tones .....................................................................................................22
Audio Embedding Modes .........................................................................................23
Audio Embedding Errors ..........................................................................................27
Mono Channel Audio Embedding ............................................................................27
Audio V-Fade ...........................................................................................................28
Input Audio Rate ......................................................................................................28
Audio Path ...............................................................................................................29
Seamless Sound Function .........................................................................................29
Test Pattern Generator .............................................................................................30
Dolby-E Automatic Header Alignment ......................................................................31
Audio Delay Ranges .................................................................................................31
External Audio Processing Delay ...............................................................................31
Maintaining Audio/Video Alignment ........................................................................32
AFD/WSS/VI Detection and Insertion ........................................................................32
Cross-Functional Parameter Changes .........................................................................32
Out Aspect Ratio ......................................................................................................32
ADS Clean Parameter ...............................................................................................33
PCM/Non-PCM Settings ...........................................................................................33
Channel Word Length ..............................................................................................34
Parameter Availability Based on Operating Mode .....................................................34
Changing Parameter Settings .....................................................................................36
Changing Parameter Settings Using Card-Edge Controls ..........................................36
Changing Parameter Settings Using CCS Software ...................................................38
Setting HMX6803+ Remote Control Parameters .......................................................38
LEDs and Alarms ..........................................................................................................57
Monitoring LEDs ......................................................................................................57
Module Status LEDs .................................................................................................59
Alarms .....................................................................................................................59
HMX6803+ and OP+HMX+
Installation and Operation Manual
v
Chapter 4 Specifications........................................................................................................ 63
Inputs ........................................................................................................................... 63
SDI Video Inputs ...................................................................................................... 63
AES/DARS Inputs .................................................................................................... 64
Analog Audio Input (Analog Audio Enabled Modules Only) ..................................... 65
Outputs ........................................................................................................................ 65
SDI Video Outputs ................................................................................................... 65
Laser Output (OP+HMX+ Only) ................................................................................... 66
Optical Port (OP+HMX+ Only) ..................................................................................... 67
RS-232/RS-422 ............................................................................................................. 68
Propagation Delay ...................................................................................................... 68
Power Consumption ................................................................................................... 69
Start-Up Time .............................................................................................................. 69
Operating Temperature .............................................................................................. 69
Appendix A Audio Bit Manipulation.................................................................................... 71
Overview ..................................................................................................................... 71
Manipulating Channel Status Bits (C-Bit) .................................................................. 72
Manipulating Validity and User Bits (V-Bit and U-Bit) .............................................. 74
Identifying Audio Characteristics
(Audio Sampling Frequency and Word Length) ........................................................ 75
Appendix B Laser Safety Guidelines.................................................................................... 77
Laser Safety ................................................................................................................. 77
Precautions for Enclosed Systems ............................................................................. 77
Precautions for Unenclosed Systems ........................................................................ 78
Labels ........................................................................................................................... 78
Appendix C Communication and Control Troubleshooting Tips............................. 79
Software Communication Problems .......................................................................... 79
Hardware Communication Problems ......................................................................... 81
Index........................................................................................................................... 83
Contents
vi
vii
Preface
Manual Information
Purpose
This manual details the features, installation, operation, maintenance, and specifications for
the HMX6803+ and OP+HMX+ auto-sensing SD/HD-SDI 8-AES audio demultiplexers.
Audience
This manual is written for engineers, technicians, and operators responsible for installation,
setup, maintenance, and/or operation of the HMX6803+ and OP+HMX+
auto-sensing SD/
HD-SDI 8-AES audio demultiplexers.
Revision
History
Table P-1 Revision History of Manual
Edition Date Comments
A April 2009 Initial release
B June 2009 Additional AFD feature set
C September 2010 Addition of level-B support
D January 2012 Addition of analog audio submodule and features
E January 2013 Minor elucidation of Input Audio Level specification
F April 2013 Update signal flow diagram and add par
ameters from
firmware version 1.10
Preface
viii
Writing
Conventions
To enhance your understanding, the authors of this manual have adhered to the following
text conventions:
Table P-2 W
riting Conventions
Term or
Convention
Description
Bold Indicates dialog boxes, property sheets, fields, buttons, check boxes,
list boxes, combo boxes, menus, submenus, windows, lists, and
selection names
Italics Indicates E-mail addresses, t
he names of books or publications, and
the first instances of new terms and specialized words that need
emphasis
CAPS Indicates a specific key on the keyboard,
such as ENTER, TAB, CTRL,
ALT, or DELETE
Code Indicates variables or c
ommand-line entries, such as a DOS entry or
something you type into a field
> Indicates the direction of navigation through a hierarchy of menus
and
windows
hyperlink Indicates a jump to another location within the electronic document
or else
where
Internet address Indicates a jump to a website or URL
Indicates important information that helps to avoid and troubleshoot
problems
Obtaining
Documents
Product support documents can be viewed or downloaded from our website. Alternatively,
contact your Customer Service representative to request a document.
Unpacking/Shipping Information
Unpacking a
Product
This product was carefully inspected, tested, and calibrated before shipment to ensure years
of stable and trouble-free service.
1 Check
equipment for any visible damage that may have occurred during transit.
2 Con
firm that you have received all items listed on the packing list.
3 Contact your de
aler if any item on the packing list is missing.
4 Co
ntact the carrier if any item is damaged.
5 Remo
ve all packaging material from the product and its associated components before you
install the unit.
Keep at least one set of original packaging, in the event that you need to return a product
fo
r servicing.
HMX6803+ and OP+HMX+
Installation and Operation Manual
ix
Product
Servicing
Except for firmware upgrades, HMX6803+ and OP+HMX+ modules are not designed for
field servicing. All hardware upgrades, modifications, or repairs require you to return the
modules to the Customer Service center.
Returning a
Product
In the unlikely event that your product fails to operate properly, please contact Customer
Service to obtain a Return Authorization (RA) number, and then send the unit back for
servicing.
Keep at least one set of original packaging in the event that a product needs to be returned
for service. If the original package is not available, you can supply your own packaging as
long as it meets the following criteria:
The packaging must be able to withstand the product’s weight.
The product must be held rigid within the packaging.
There must be at least 2 in. (5 cm) of space between the product and the container.
The corners of the product must be protected.
Ship products back to us for servicing prepaid and, if possible, in the original packaging
material. If the product is still within the warranty period, we will return the product prepaid
after servicing.
References ANSI/SMPTE 259M-1997
10-Bit 4:2:2 Component and 4fsc NTSC Composite Digital Signals - Serial Digital Interface
ITU-R BT.601-5
Studio Encoding Parameters of Digital Television for Standard 4:3 and Wide-Screen 16:9
Aspect Ratios
SMPTE 292M-1999
Bit-Serial Digital Interface for High-Definition Television Systems
ITU-R BT.709-4
Parameter Values for the HDTV Standards for Production and International Programme
Exchange
SMPTE 291M-1998
Ancillary Data Packet and Space Formatting
SMPTE RP 184-1996
Specification of Jitter in Bit-Serial Digital Systems
ANSI/SMPTE 276M-1995
Transmission of AES/EBU Digital Audio Signal Over Coaxial Cable
Preface
x
AES3-2003
AES Recommended Practice for Digital Audio Engineering - Serial Transmission Format for
Two-Channel Linearly Represented Digital Audio Data
TIA/EIA-232-E 1991
Interface Between Data Terminal Equipment and Data Circuit-Terminating Equipment
Employing Serial Binary Data Interchange
EIA/TIA-422-B 1994
Electrical Characteristics of Balanced Voltage Digital Interface Circuits
EIA RS-485 1983
Standard for Electrical Characteristics of Generators and Receivers for use in Balanced
Digital Multipoint Systems
SMPTE 346-M 2000
Time Division Multiplexing Video Signals and Generic Data over High-Definition Interface
SMPTE 352-M 2002
Video Payload Identification for Digital Interfaces
SMPTE 424-M 2005 (Proposed)
3Gb/s Signal/Data Serial Interface
SMPTE 425-M 2005 (Proposed)
3Gb/s Signal/Data Serial Interface - Source Image Format Mapping
47 Code of Federal Regulations
Part 15 FCC rules—Radio Frequency Devices
EN55103-1
EMC emission requirements applies to professional audio, video, audio-visual and
entertainment lighting control apparatus
EN55103-2
EMC immunity requirements applies to professional audio, video, audio-visual and
entertainment lighting control apparatus
IEC 61754-4
Specifications for the fiber optic connector type SC/PC
IEC 61754-2
Specifications for the fiber optic connector type ST/PC terminated to a type BFOC/2,5
HMX6803+ and OP+HMX+
Installation and Operation Manual
xi
IEC 61754-13
Specifications for the fiber optic connector type FC/PC
Safety Standards and Compliances
See Laser Safety on page 77 to find the safety standards and compliances for this OPTO+
series product. A 6800+ ser
ies safety manual is shipped with every 6800+ Frame
Installation and Operation Manual and can be downloaded from our website. Alternatively,
contact your Customer Service representative for a copy of this safety manual.
Restriction on Hazardous Substances (RoHS) Compliance
Directive 2002/95/EC—commonly known as the European Union (EU) Restriction on
Hazardous Substances (RoHS)—sets limits on the use of certain substances found in
electrical and electronic equipment. The intent of this legislation is to reduce the amount of
hazardous chemicals that may leach out of landfill sites or otherwise contaminate the
environment during end-of-life recycling. The Directive, which took effect on July 1, 2006,
refers to the following hazardous substances:
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent Chromium (Cr-V1)
Polybrominated Biphenyls (PBB)
Polybrominated Diphenyl Ethers (PBDE)
According to this EU Directive, all products sold
in the European Union will be fully
RoHS-compliant and “lead-free.” (See our website for more information on dates and
deadlines for compliance.) Spare parts supplied for the repair and upgrade of equipment
sold before July 1, 2006 are exempt from the legislation.
Equipment that complies with the
EU directive will be marked with a RoHS-compliant emblem, as shown in Figure 1.
Figure P-1 RoHS Compliance Emblem
Waste from Electrical and Electronic Equipment (WEEE) Compliance
The European Union (EU) Directive 2002/96/EC on Waste from Electrical and Electronic
Equipment (WEEE) deals with the collection, treatment, recovery, and recycling of electrical
and electronic waste products. The objective of the WEEE Directive is to assign the
responsibility for the disposal of associated hazardous waste to either the producers or users
of these products. As of August 13, 2005, the producers or users of these products were
required to recycle electrical and electronic equipment at end of its useful life, and may not
dispose of the equipment in landfills or by using other unapproved methods. (Some EU
member states may have different deadlines.)
Preface
xii
In accordance with this EU Directive, companies selling electric or electronic devices in the
EU will affix labels indicating that such products must be properly recycled. (See our website
for more information on dates and deadlines for compliance.) Contact your local Sales
representative for information on returning these products for recycling. Equipment that
complies with the EU directive will be marked with a WEEE-compliant emblem, as shown in
Figure 2.
Figure P-2 WEEE Compliance Emblem
Safety Terms and Symbols in this Manual
This product manual uses the following safety terms and symbols to identify certain
conditions or practices. See Laser Safety
on page 77 and the FR6802+ Safety Instructions
and Standards Manual fo
r more information.
Statements identifying con
ditions or practices that may result in
personal injury or loss of life. High voltage is present.
Statements identifying conditions or
practices that can result in
damage to the equipment or other property.
WARNING
CAUTION
1
1
Introduction
Product Description
The HMX6803+ is an auto-sensing SD/HD-SDI 4-AES audio multiplexer and processing
amplifier with one digital video input and one DARS reference input, and has four processed
SD/HD-SDI outputs. The OP+HMX+ module has the same features, and an additional optical
transmitter. The modules support embedding and passing of Dolby E™ metadata, and
picture and sound control through integrated processing amplifiers. The basic HMX6803+
and OP+HMX+ provide SD and HD-SDI audio embedding, and there is an optional upgrade
to 3G HD-SDI (including dual-link). Another optional upgrade adds four AES inputs, for a
total of eight.
Each HMX6803+ or OP+HMX+ package includes a module-specific breakout cable with
unbalanced (coaxial) audio connectors that expands the number of available connections
beyond what would fit on a standard two-slot back connector. Balanced AES inputs are
supported with external baluns. The breakout cable includes an RS-232/RS-422 serial
connector to embed metadata.
HMX6803+ and OP+HMX+ can be operated locally (using card-edge controls); or operated
and monitored remotely with control software applications such as CCS
Navigator
™
, HTTP
web browser, third-party SNMP-based control applications, or CCS-compliant remote
control panels such as NUCLEUS. The modules are QSEE™-compliant, so you can monitor a
thumbnail when it is installed in an Ethernet-equipped FR6802+QXF or FR6822+ frame.
The HMX6803+ and OP+HMX+ back connector requires two frame slots within an
FR6802+XF, FR6822+, or FR6802+QXF frame. The HMX6803+AI+T and OP+HMX+AI+T
require three slots within the same frames. There is no backward compatibility provided for
use with 6800/7000 series frames or FR6802+DM frames. HMX6803+ and OP+HMX+ must
be installed in a frame with fans.
Main
Features
All versions of HMX6803+ and OP+HMX+ include the following features:
Inputs
One serial digital SMPTE 292M/SMPTE 259M SDI input
Metadata
Four AES audio
DARS input (unbalanced, balanced compatible with external balun)
Outputs
Four serial digital SMPTE 292M/259M SDI processed outputs
One RS-232/RS-422 serial connector to embed metadata
Chapter 1
Introduction
2
10-bit video processing in the following standards and frame rates:
Standard definition 525/625
1080psf (progressive segmented frame), 23.98/24 Hz
1080i (interlaced), 25/29.97/30 Hz
1080p (progressive), 23.98/24/25/29.97/30 Hz
720p (progressive), 50/59.94/60 Hz
Up to 50 frames of SD video delay, up to 11 frames of HD video delay
Auto-detect or user-forced input video standard with HD/SD-SDI auto sensing
AFD/WSS/VI detector and inserter
Seamless sound functionality
V-fading of the output audio on source audio change
Automatic cable equalization
Embed on black or grey on loss of video mode
Video processing amplifier with luminance gain/offset and chrominance gain/offset
controls
16-, 20-, or 24-bit audio processing
Shadowed/restored parameter settings when switching video standards
Card-edge control and monitoring
Serial and Ethernet remote control and monitoring
Video and audio test signal generators
Optional
Features
OP+HMX+ has an optional fiber transmitter.
HMX68OPT+AES8
adds four balanced or unbalanced AES inputs, for a total of eight.
The HMX68OPT+3G upg
rade option adds 10-bit video processing with 1080p (progressive)
video standard at 50/59.94/60 Hz frame rates as per SMPTE 424M and dual-link as per
SMPTE 372M (data and audio embed/de-embed is fixed on link A).
HMX6803+AI+T and OP+HM
X+AI+T add analog audio inputs.
OP+HMX+
Module
Types
Table 1-1 describes the different versions of the OP+HMX+ product. The basic module
outputs through an SC/PC connector. Hardware upgrade options are listed in Table 1-2.
Table 1-1 OP+HMX+ Modules
Module Name Description
OP+HMX+13
D Fiber transmitter set at 1310 nm
OP+HMX+CxxD Fiber transmitter set at CWDM
w
avelength of 1xx0 nm
OP+HMX+AI+13
T Fiber transmitter set at 1310 nm with
analog audio inputs
OP+HMX+AI+CxxT Fiber transmitter set at CWDM
w
avelength of 1xx0 nm with analog
audio inputs
HMX6803+ and OP+HMX+
Installation and Operation Manual
3
Hardware
Options
All OP+HMX+ modules are shipped with standard SC/PC fiber connectors. Other
connectors are available (see Table 1-2).
Table 1-2 A
vailable Connectors
Item Description
OP
+OPT+SC SC/PC fiber optic connectors (standard)
OP+OPT+ST ST/PC fiber optic connectors (optional)
OP+OPT+FC FC/PC fiber optic connectors (optional)
Module Descriptions
HMX6803+ and OP+HMX+ hardware versions have minor variances in their specifications,
which are listed in Chapter 4, Spe
cifications on page 63.
To determine which specifications app
ly to your module, see Reading Software and
Hardware Versions o
n page 37.
Front Module
Figure 1-1 is a generic top-front view of a typical 6800+ module and shows the general
location of standard LEDs, controls, and jumpers. The number of control and monitoring
LEDs on
6800+ modules varies.
Modul
e
status
Mode select
rotary
Navigation
toggle
Monitoring
LEDs
Remote/local
control
Extractor
handle
Control
LEDs
Figure 1-1 Typical 6800+ Module
Table 1-3 o
n page 4 briefly describes generic 6800+ LEDs, switches, and jumpers. See
Chapter 3, Ope
ration for more information on specific HMX6803+ and OP+HMX+
module controls, LEDs, and jumpers.
Table 1-3 Generic 6800+ Module Features
Feature Description
Module status
LEDs
Various color and lighting combinations of these LEDs indicate
th
e module state. See Monitoring LEDs on
page 57 for more
information.
Mode select
ro
tary switch
This switch selects between various control and feedback
parameters.
Navigation
toggle switch
This switch navigates up and down through the available
con
trol parameters:
Down: Moves down through the parameters
Up: Moves up through the parameters
Control LEDs Various lighting combinations of these control LE
Ds
(sometimes referred to as “Bank Select LEDs”) indicate which
bank is currently selected. See Selected Bank as Indicated
by Control LEDs
on page 36 for more information.
Monitoring
LEDs
Each 6800+ mod
ule has a number of LEDs assigned to
indicate varying states/functions. See Monitoring LEDs on
page 57 for a description of these LEDs.
Local/remote
control jumper
Local: This jumper setting locks out external control panels
and allows card-edge control only; limits the functionality
of remote software applications to monitoring
Remote: This jumper setting allows remote or local
(card-edge) configuration, operation, and monitoring of
the HMX6803+ and OP+HMX+ (this is the default setting)
Chapter 1
Introduction
4
Back
Connectors
Figure 1-2 shows the double-slot back connector used by HMX6803+ and OP+HMX+
modules.
SDI IN 1
SDI OUT 1
SDI OUT 2
SDI OUT 3
SDI OUT 4
BREAKOUT
Fiber
AES IN / AES OUT / DARS / METADATA
HMX6803+
HDX6803+
SFS6803+
OP+HMX+
OP+HDX+
OP+SFS+
SDI IN
SDI OUT
1
2
3
4
ANALOG AUDIO IN / OUT
Rx/ Tx (OP+)
Two-slot back connector for
HMX6803+ and OP+HMX+
Three-slot back connector for
HMX6803+AO+T and
OP+HMX+AO+T
HMX6803+ and OP+HMX+
Installation and Operation Manual
5
Figure 1-2 HMX6803+ and OP+HMX+ Back Connector
Note:
To maintain optimal output video signal integrity, terminate unused output video
BNCs with 75
Ω
terminators.
Breakout
Cables
The standard HMX6803+ and OP+HMX+ ship with an unbalanced breakout cable, pictured
in Figure 1-3. For information on ordering cables, see Table 2-1 o
n page 11.
If you need to make your own breakout cable, pinouts are listed in Table 1-4, and pin
numbers for the 44-pin connector are listed in Figure 1-4 o
n page 7.
AES 1 In
AES 2 In
AES 3 In
AES 4 In
AES 5 In
AES 6 In
AES 7 In
AES 8 In
AES 1 Out
AES 2 Out
AES 3 Out
AES 4 Out
AES 5 Out
AES 6 Out
AES 7 Out
AES 8 Out
DARS In
Data I/O
Genlock
Serial
AES1 IN
AES2 IN
AES3 IN
AES4 IN
AES5 IN
AES6 IN
AES7 IN
AES8 IN
AES1 OUT
DARS IN
DATA I/O
GENLOCK
SERIAL
AES2 OUT
AES3 OUT
AES4 OUT
AES5 OUT
AES6 OUT
AES7 OUT
AES8 OUT
(not used with HMX6803+ and OP+HMX+)
Chapter 1
Introduction
6
Figure 1-3 HMX6803+ and OP+HMX+ Breakout Cable
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
