ADS Technologies Pyro AV 3G14DA Quick Manual

Brand: ADS Technologies

Model: Pyro AV 3G14DA

Category: Supplementary music equipment

Type: Quick Manual

This manual is also suitable for

PVC-924

QuickGuide

3G14DA

North American Office

ADS Tech Inc, USA

12627 Hidden Creek Way

Cerritos, CA 90703, USA

EU Office

ADS Tech

Western Business Park

Shannon, County Clare, Ireland

www.pyroav.com

Pyro AV

by ADS Tech

924-521

Safety Precautions

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to alert

the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient magnitude

to constitute a risk to persons.

The exclamation point, within an equilateral

triangle, is intended to alert the user to the

presence of important operating and mainte

nance (servicing) instructions in the literature

accompanying the appliance.

Warning

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR

MOISTURE. THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING, AND OBJECTS FILLED

WITH LIQUIDS, SUCH AS VASES, SHALL NOT BE PLACED ON THE APPARATUS.

Caution

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning equipment off and on,

the user is encouraged to try to correct the interference by one of more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

PLEASE READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERS MANUAL AND THOSE MARKED ON THE UNIT, RETAIN THIS

BOOKLET FOR FUTURE REFERENCE.

This set has been designed and manufactured to assure personal safety.

Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following

procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE AND VOID PRODUCT WARRANTY, REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit

from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has been dropped.

Technical Support:

To Contact the PYRO AV product support team call: 562-926-4338

Support via the Web: www.pyroav.com/support/

You can find product F.A.Q.’s documents, helpful hints, etc. on our product support pages.

When calling for support, please have all product information and serial numbers available so we can ensure your

product has been registered.

Limited Warranty:

PYRO AV warrants that this product will be free from defects in materials and workmanship for a period of five years from

the date of purchase. If a product proves to be defective during this warranty period, PYRO AV, at its option will either

repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the

defective product.

In order to obtain service under this warranty, you the Customer, must notify PYRO AV of the defect before the

expiration of the warranty period and make suitable arrangements for the performance of service. The Customer shall

be responsible for packing and shipping the defective product to a service center designated by PYRO AV, with

shipping charges prepaid. PYRO AV shall pay for the return of the product to the Customer via ground postal or UPS

shipping if the shipment is to a location located in the same country as the service center. Customer shall be

responsible for paying all shipping charges, insurance, duties, taxes and any other charges for products returned to any

other country.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate

maintenance and care. PYRO AV shall not be obligated to furnish service under this warranty; a.) to repair damage

resulting from attempts by personnel other than PYRO AV representatives to install, repair or service the product, b.) to

repair damage resulting from improper use or connection to incompatible equipment, c.) to repair any damage or

malfunction caused by the use of non-PYRO AV parts or supplies, or d.) to service a product that has been opened,

modified or integrated with other products when the effect of such a modification or integration increases the time or

difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY PYRO AV IN LIEU OF OTHER WARRANTIES EXPRESSED OR IMPLIED. PYRO AV AND ITS SUPPLIERS

DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PYRO AV’S RESPON-

SIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE WHOLE AND EXCLUSIVE REMEDY PROVIDED TO THE

CUSTOMER FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHATEVER PYRO

AV OR THER VENDOR HAS ADVANCE NOTICE OF THE POSSSIBILITY OF SUCH DAMAGES.

Trademarks:

PYRO AV, PYRO, TV Elite and ADS Tech are trademarks of ADS Technologies, inc. All other trademarks are the property

of their respective holders.

without notice. No part of this document may be reproduced or transmitted in any form, by any means, electronic or

mechanical including photocopying or recording, without the express written permission of PYRO AV – ADS Technolo

gies, inc.

Triple Rate 4 Port Distribution Amplifier

Product Overview:

The 3G14DA is one of the world’s first distribution amplifiers able to operate up to 3

Gb/sec. Future proof your video infrastructure. 3 Gb/sec. supports video resolutions up

to 1920 x 1080p 60 over a single coax cable. Triple rate devices are backward compat-

ible to SD and HD-SDI. You may not be running 3 Gb/sec. today, but you probably will

in the future. Your investment today ensures compatibility for tomorrow.

The 3G14DA is a Triple rate distribution amplifier with buffered and re-clocked outputs

on 4 BNC connectors in a mini block size enclosure. Split your SDI video stream into 4

separate re-clocked video outputs.

The 3G14DA automatically detects the signal speed of the incoming video signal and

distributes pristine video quality over the 4 output ports with no dip switches or user

settings necessary. Individual signal present LED’s display the locked SDI rate (270 MB,

1.5 Gb/sec and 3 Gb/sec.), other signal speeds are re-amplified and passed through.

The 3G14DA provides cable equalization to restore SDI signals over 75 Ω coax cable

supporting data rates from 143 MB/sec. to 2.97 Gb/sec. The 3G14DA is designed to

recover the embedded clock, re-time the clock signal and removes high frequency

jitter from SMPTE 424M, 292M and 259M-c compliant digital video signals. The signal is

then output through high quality cable drivers for each output port to ensure SMPTE

compliant SDI video output up to 2.97 Gb/sec.

Features:

• Triple-Rate 3G/HD/SD-SDI Distribution Amp

• Auto-detection of input signal data rate

• LED signal rate indicators (270 Mb/sec., 1.5 Gb/sec. and 3 Gb/sec.)

Bypass LED indicates Power and non-locked SDI data rates

• 4 individually re-clocked outputs with jitter removal

• Rugged Aluminum and Steel enclosure

• 5 VDC (110-240 50/60 Hz) Locking Power Supply

• 5 year warranty

The Product includes:

• 1 each – 3G14DA Triple Rate Distribution Amplifier

• 1 each - 5 VDC Power Supply with Locking Connector

• 2 each - Velcro Strips for easy mounting

• 2 each - 4-40 standard rack mounting screws

• User Guide

Pyro AV

by ADS Tech

3G14DA

SDI In

Power

Pyro AV

by ADS Tech

3G14DA

SDI Out 2

SDI Out 4

SDI Out 1

SDI Out 3

5 - 24 VDC

Bypass

3 Gb/sec.

1.5 Gb/sec.

270 Mb/sec.

3G14DA Block Diagram

Triple-Rate 3G/HD/SD-SDI Input

Equalizer

SDI (270MB) LED

Jitter Filter



Triple-Rate Output

Triple-Rate

Re-Clocker

Cable Driver

HD (1.485GB) LED

3G (2.97GB) LED

Connections and Configuration:

4 Duplicate SDI

Output BNC

connections

Triple Rate

SDI Input BNC

+ 5VDC

Locking

Power

Connector

Pyro AV

by ADS Tech

3G14DA

SDI In

Power

Pyro AV

by ADS Tech

3G14DA

SDI Out 2

SDI Out 4

SDI Out 1

SDI Out 3

5 - 24 VDC

Bypass

3 Gb/sec.

1.5 Gb/sec.

270 Mb/sec.

Installation Instructions:

1. Connect video equipment to the BNC connector (SDI In)on the 3G14DA.

2. Connect the power with locking connector to device and power source.

3. If a valid SDI signal is present, the 3G14DA will auto-detect the SDI data rate and

the LED showing the locked speed will indicate (270 Mb/sec., 1.5 Gb/sec or 3

Gb/sec.) illuminate.

4. If the SDI signal is not one of the locked SDI rates indicated above but is still a

valid SDI signal, the BYPASS LED will be illuminated.

5. Output data rate on all 4 BNC connectors will match the input data rate.

6. Device and SDI signal locking is reset if power is cycled.

Specifications:

Serial Input 3G/HD/SD-SDI (SMPTE 424M, 292M, 259M)

Serial Output 3G/HD/SD-SDI(SMPTE 424M, 292M, 259M)

SDI Outputs 4 BNC Connectors

Typical SDI Cable Equalization

70m of Belden 1694A cable @ 2.97 Gb/sec.

140m of Belden 1694A cable @ 1.85 Gb/sec.

350m of Belden 1694A cable @ 270 Mb/sec.

Connectors 75 Ω BNC

Power 5-24 VDC - 110-220 50/60 Hz

Locking Power connector

Size Enclosure – 5.813”L x 3.124”H x 1.187”W

SDI Connect

Rate LED’s

ADS Technologies Pyro AV 3G14DA Quick Manual

Brand: ADS Technologies

Model: Pyro AV 3G14DA

Category: Supplementary music equipment

Type: Quick Manual

This manual is also suitable for

PVC-924

Download PDF

report

ADS Technologies Pyro AV 3G14DA Quick Manual

This manual is also suitable for

ADS Technologies Pyro AV 3G14DA Quick Manual

Related papers

Other documents