USER MANUAL
AROKH X-2 & Y-2
Default buttons & functions
1. Left click
2. Right click
3. Middle click
4. Scroll up
5. Scroll down
6. Forward
7. Backward
8. DPI cycle
9. Double-click
10. DPI settings indicator
How to start
1. Download the software from our website http://www.arokh-gaming.com/downloads
2. Unzip the zipped folder you just downloaded with your usual unzipping program
3. In the unzipped folder, launch the software installation by double-clicking on the file «Setup.exe»
4. Follow the steps until the installation is complete and click on «Finish»
5. Connect the mouse to a USB port on your computer
6. Wait until the message «Your device is ready to use» appears
7. Launch the mouse configuration software
8. You can now customize your mouse configuration.
After making any change do not forget to click on the «Apply» button to update the configuration.
1
2
3
4
5
6
7
8
9
10
1www.arokh-gaming.com
INTERFACE CONTROLS
Main Control
A. BUTTON ASSIGNMENT
- Click on the button you want to re-assign
- Click on the new function you want to assign
to this button
- Click on «Apply» to update the configuration
You can reset all your buttons assignments by
clicking on «Reset»
B. DPI CONFIGURATOR
In this tab, you can set 4 different DPI settings
levels for the mouse DPI cycle function
- Click on the DPI settings you want to adjust
- Move the slider to the prefered DPI level
(250-3500 DPI)
- Click on «Apply» to update the configuration
Please note that the X and Y axis cannot be set
separately
C. DOUBLE CLICK
This setting allows to adjust the double click
speed
This is a mirror of the Windows setting in
Control Panel / Mouse / Double click speed
- Move the slider to the prefered speed level
- Click on «Apply» to update configuration
A
B
C
2www.arokh-gaming.com
Color Control
A. COLOR SELECTOR
This tab allows you to set the lights color of
your mouse
- Select the color you want
- Click on «Apply» to update configuration
B. LIGHT FUNCTION
- Toggle off the button to disable the lighting
effect
- Toggle on the button to enable it
- Click on «Apply» to update configuration
By default, the lighting function is on.
A
B
C
D
C. LIGHT INTENSITY
- Adjust the light intensity by choosing between
«Low», «Normal» and «High» luminosity
- Click on «Apply» to update configuration
D. LIGHT PULSATION
- Disable («Off»)or adjust the breathing light
speed by choosing between «Slow», «Normal»
or «Fast»
- Click on «Apply» to update configuration
3www.arokh-gaming.com
Advanced controls
A. ADVANCED SENSITIVITY
- Toggle off the button to disable the
synchronous sensitivity
- By moving the X and Y sliders, you will be able
to adjust the sensitivity of each axis
independently
- Toggle on the button to re-enable
synchronous sensitivity of both axis
- Click on «Apply» to update configuration
B. VERTICAL SCROLL SPEED
- Move the slider to adjust the scroll wheel
speed from 1 (slow scrolling) to 10 (fast
scrolling)
- Tick the «1 page» button for full page scroll
- Click on «Apply» to update the configuration
C. POLLING RATE
The polling rate controls the data transmission
speed
- Click on your preferred polling rate level
between 125, 250, 500 and 1000Hz
- Click on «Apply» to update the configuration
D. POINTER SENSITIVITY AND SPEED
This setting allows to adjust the pointer
sensitivity.
This is a mirror of the Windows setting in
Control Panel / Mouse / Pointer options
- Move the slider to the prefered pointer speed
level
- Tick the option box to enable mouse
acceleration (usually not recommended)
- Click on «Apply» to update configuration
E. POINTER VISIBILITY
This is a mirror of the Windows setting in
Control Panel / Mouse / Pointer options
- Tick the option box to hide the pointer while
typing
- Tick the option box to enable pointer trails
- Click on «Apply» to update configuration
F. DRIVER RESET
Reset your configuration.
A window will open to ask you to confirm the
reset of all profiles, macros and settings.
A
B
C
D
E
F
4www.arokh-gaming.com
MACRO FUNCTIONS
In the button assignment tab, you are able to
assign a personnalized macro to your mouse
buttons.
A. CREATE A MACRO
- Click on the button the macro will be assigned
to
- Click on «Assign Macro»
- Click on «Macro Manager»
- Click on «New» to create a new macro
- Enter a name for the macro and press enter
- Click «Start Record» to start recording your
macro. When you are done, click «Stop Record»
- Right click in the «Key press sequence»
windows to add mouse events, delays and
delete commands
- Click «Ok» when you are done creating your
macros
B. ASSIGN A MACRO
- Click on the button the macro will be assigned
to
- Click on «Assign Macro»
- Click on the Macro name you previously
created
- Click on «Apply» to update configuration
5www.arokh-gaming.com
PROFILES SETTINGS
Profiles allow you to save your favourite
configurations. You can set up to 5 profiles.
A. CHANGING A PROFILE
- Select one of the 5 profiles
- Click on edit profile
- Give your profile a name
- Enter a path to an executable file. Each time
this file is launched, the profile assigned will be
loaded
automatically
- Click on «Ok»
B. SAVE A PROFILE SETUP
- Click on «Save profile»
- Enter a name for the mouse profile you would
like to save
- Click on «Save»
- Click on «Ok»
C. LOAD A PROFILE SETUP
- Click on «Load profile»
- Select your own saved profile
- Click on «Open»
- Click on «Apply» to update configuration
6www.arokh-gaming.com
/
