HomePlace Structures SVCUP Operating instructions

0QUJPOBM$VQPMB"TTFNCMZ

Step 1: Remove Cupola from box.

Note: The metal edges may be

sharp. Handle carefully.

Step 2: Insert Vinyl finial in top hole and

press down firmly.

Step 3: Metal roof can remain

as is, or you can apply shingles

directly on top of the metal to

match the shingles on your

gazebo.

Step 4: Place Cupola on

top of roof - make sure

cupola is straight and

plumb on every side.

Step 5: Fasten the Cupola with

white screws on 4 sides of the

Cupola, installing the screws on

an angle, one inch from the bot-

tom, directly through the side of

the cupola.

This optional Vinyl Cupola will fit any HomePlace Structures octagon gazebo. It will fit on

many other gazebos and other outdoor structures as well.

If you have ordered both a gazebo and a cupola, the gazebo may be shipped separate from

the cupola. The gazebo and the cupola will most likely arrive on separate dates.

Download PDF