2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Symmons
  7. 0630-3605-YSB-TRM

Symmons 0630-3605-YSB-TRM Installation guide

  • Hello! I'm a chat assistant that has analyzed the provided installation guide for the Shower Hand Shower Trim 0630-3605-YSB-TRM from Symmons. This document provides detailed specifications, dimensions, and a parts breakdown for the product. I am now ready to answer your questions about this product and its installation.
  • What is included in the Shower/Hand Shower Trim?
    What is the material and finish of the Shower/Hand Shower Trim?
    What is the warranty for this product in residential installations?
    What is the warranty for industrial/commercial installations?
    What flow rate does the shower head have
DS Creations
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
0630-3605-YSB-TRM (CD0630-3605-YSB-TRM)
Shower/Hand Shower Trim
Installation Guide
0630-3605-YSB-TRM
Shower/Hand Shower Trim
Shower/Hand Shower Trim shall include metal lever handle,
30" metal slide bar, separate dual outlet diverter trim,
in-line vacuum breaker, 60" exible metal hose, 1 mode
square showerhead, 1 mode square hand shower and
2.5 gpm (9.5 L/min) ow restrictors. Shower/Hand Shower
trim shall be made from metal construction, plated in
standard polished chrome nish.
Dimensions
Measurements
A Sq. 8", 203 mm
B Sq. 2-1/2", 64 mm
C Sq. 2-1/2", 64 mm
D Sq. 5", 127 mm
E 21-5/8", 549 mm
F Sq. 7-1/2", 191 mm
G 3-1/8", 79 mm
H 13/16", 21 mm
I 1", 25 mm
J 15-5/16", 389 mm
K 2-9/16", 65 mm
L 4-7/8", 124 mm
M Ref. 77", 1956 mm
N 10", 254 mm
O 3-7/16", 87 mm
PRough-in
2-3/8" ± 1/2", 60 mm ± 13 mm
Q Ref. 42", 1067 mm
A
B
C
E
H
D
FG
I
FLOOR
N
Q
P
M
O
J
L
K
Notes:
1) All dimensions measured from nominal rough-in (see P as reference).
2) Dimensions subject to change without notice.
Compliance
-ASME A112.18.1/CSA B125.1
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-2388 REV C ■ 050818
Parts Breakdown
Replacement Parts
Item Description Part Number
A Showerhead 361SH-8
B Flange T-375-KIT
C
D
Handle
Set Screw T-617
E Dome Cover RTS-036
F Diverter Escutcheon RTS-040
G Shower Escutcheon RTS-001
H Wall Ell T-444-SQ-KIT
I Hand Shower 0195-2W
J
L
Vacuum Breaker
60" Metal hose EF-104
K Slide Bar T-754
D
G
FF
F
G
F
G
C
E
E
A
B
D
C
G
H
I
J
L
K
Notes:
1) Apply a bead of silicone around the perimeter of all shower trim
installed ush to the nished wall (less mounting plates and
brackets). Leave opening on bottom of escutcheon for weep hole.
2) Apply plumber tape to all threaded connections.
Tools Required for Installation
Adjustable
Wrench
Allen Wrench:
Handle (3 mm)
Drill
Phillips Head
Screwdriver
Plumber Tape
Silicone
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
/