12
done so, and not until then, you can connect the USB
adapter to a correctly installed electrical socket.
- Do not leave water in the appliance when it is not in use.
- If necessary, remove any remaining water in the appliance
before storing it or putting it away, and clean the appliance
before the next use.
- Fully drain any remaining water after use and allow the
filter element to dry fully in order to avoid the risk of mold or
germs forming. Use the drain outlet for this.
- Please note that high levels of humidity can promote growth
of biological organisms in the surrounding area.
- Do not allow the area around the appliance become damp
or wet. If damp occurs, please reduce the appliance output
volume. If the output volume of the appliance cannot be
reduced any further, use the appliance intermittently.
Make sure that materials that readily absorb moisture, such
as carpets, drapes, curtains or table cloths do not become
damp.
- Only put cold, clear water into the water tank. Do not use any
additives. Never fill the water tank beyond the MAX mark.
- To prevent overflowing, insert the filter element first and
then fill the water tank.
- Before filling the water tank, ensure that the drain outlet on
the underside of the appliance is sealed.
- Operate the appliance exclusively on a level and non-slip
surface. Avoid shocks to prevent the water spilling over in
the water tank.
- Do not tilt the appliance, do not lay it on its side and do not
turn it upside down and avoid repositioning it when there is
water in the water tank or appliance.
- Ensure that no liquids reach the contacts of the appliance,
the USB cable and/or the USB adapter.