2. StarLab
  3. S7166-0010 ErgoOne Fast Pipette Controller

StarLab S7166-0010 ErgoOne Fast Pipette Controller User manual

  • Hello! I've reviewed the ErgoOne FAST user manual, and I'm ready to assist you. The document explains how to remove the discharge protector, understand the battery status lights, and control the aspiration speed of the pipette. Feel free to ask me any questions you have about your device or the instructions in this manual.
  • What does a solid green light on the battery status display indicate?
    What does a flashing red light on the battery status display mean?
    How can I control the aspiration speed?
Passonate for science.
This is your ErgoOne® FAST
Quickstart Manual.
Slide the battery
compartment lid open.
Remove the battery and
discharge protection.
Install the battery and close
the battery compartment
lid.
Solid green light:
The rechargeable battery
is fully charged.
Solid yellow light:
The rechargeable battery
is half-charged.
Solid red light:
The rechargeable battery
is almost empty.
Flashing red light:
The rechargeable battery
needs to be charged.
Removing the discharge protector
Prior to rst usage please proceed as follows:
Battery status display
Ready for operation:
Empty battery
Loading battery
23
3
h
Passonate for science.
This is your ErgoOne® FAST
Quickstart Manual.
Flashing red light:
The rechargeable battery is
< 5 % charged.
Flashing yellow light:
The rechargeable battery is
5 - 60 % charged.
Flashing green light:
The rechargeable battery is
60 - 99 % charged.
Battery status display
Charge battery:
Speed control
The liquid aspiration speed is regulated continuously by controlling the pressure on the
control buttons, i.e. how far in the button is pressed.
Slow aspiration Quickly aspirating
To slowly aspirate or dispense
liquid, press the corresponding
control button lightly.
To quickly aspirate or dispense
liquid, press the corresponding
control button rmly.
QSMEOF-INT-03-2021
/