Avocent SWITCHVIEW PC Quick Installation Manual

Brand: Avocent

Model: SWITCHVIEW PC

Category: KVM switches

Type: Quick Installation Manual

This manual is also suitable for

SwitchView SwitchView PC

Avocent SWITCHVIEW PC is a versatile KVM switch that allows you to control multiple computers using a single keyboard, mouse, and monitor. With support for up to 4 computers, you can easily switch between them using hotkeys or the push-button interface. The SWITCHVIEW PC also features autoscan functionality, allowing it to automatically cycle through connected computers at a customizable interval. Additionally, the switch provides a PS/2 port for legacy keyboards and mice, as well as USB 2.0 ports for connecting modern peripherals.

The Power of Being There

Quick Installation Guide

SwitchView

2 or 4-Port PS/2 Desktop KVM Switch

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

Console port

Monitor

COMPUTER 4

COMPUTER 3

COMPUTER 2

COMPUTER 1

DC 9V

VGA 4

K4 M4

VGA 3

K3 M3

VGA 2

K2 M2

VGA 1

K1 M1

NOTE: If keyboard or mouse issues arise when

using a low-power system such as a laptop, you

should order an optional power supply. Contact

Avocent for more details.

HINWEIS: Treten Probleme mit der Tastatur oder

der Maus bei der Verwendung eines Systems mit

niedriger Spannung (z. B. Laptop) auf, sollten

Sie eine optionale Stromversorgung bestellen.

Für weitere Informationen nehmen Sie bitte mit

Avocent Kontakt auf.

NOTA :

Si des problèmes surviennent au niveau

du clavier et de la souris lors de l’utilisation

d’un système de faible puissance, tel qu’un

ordinateur portable, commandez une alimentation

supplémentaire. Pour de plus amples détails,

contactez Avocent .

NOTA:

Si se producen problemas con el teclado

y el ratón al utilizar un sistema de bajo voltaje,

como por ejemplo una computadora portátil,

debe pedir una fuente de alimentación opcional.

Póngase en contacto con Avocent para obtener

más información.

NOTA: se si veriﬁcano problemi con la tastiera

o il mouse durante l’uso di un sistema a basso

consumo, ad esempio un portatile, si raccomanda di

ordinare un cavo di alimentazione supplementare.

Per maggiori informazioni rivolgersi ad Avocent.

注：ラップトップなどの低出力システムをご使用中

にキーボードやマウスに支障が生じる場合には、オ

プションの電源装置を取り寄せてください。詳細に

ついてはAvocentまでお問い合わせください。

注：如果在使用低电压系统（例如便携机）时出现与

键盘或鼠标有关的问题，您应该订购一个可选电源。

请联系 Avocent，以获取详细信息。

참고: 랩톱과 같은 저전압 시스템을 사용하는 도

중 키보드 또는 마우스에 문제가 발생하면 추가 전

원 공급 장치를 구입해야 합니다. 자세한 내용은

Avocent에 문의하십시오.

Connect your peripherals

Schließen Sie die Peripheriegeräte an

Connectez vos périphériques

Conecte los periféricos

Collegare le periferiche

周辺機器を接続します

连接外围设备

주변기기를 연결합니다

Connect your computers

Schließen Sie Ihre Computer an

Connectez vos ordinateurs

Conecte las computadoras

Collegare i computer

コンピューターを接続します

连接计算机

컴퓨터를 연결합니다

Power up your system

Fahren Sie das System hoch

Mettez le système sous tension

Encienda el sistema

Accendere il sistema

システムの電源を入れます

打开系统的电源

시스템 전원을 켭니다

To install the switch / So installieren Sie den Switch /

Installation du commutateur / Instalación del conmutador /

Installazione dello switch /

スイッチのインストール手順

要安装此交换机

스위치 설치 방법

Quick Installation Guide

SwitchView

DVI

2 or 4-Port DVI USB KVM Switch

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

Connect the power supply

Schließen Sie die Stromversorgung an

Connectez la source d’alimentation

Conecte la fuente de alimentación

Collegare l’alimentazione

電源に接続します

连接电源

전원 공급 장치를 연결합니다

Connect your peripherals

Schließen Sie die Peripheriegeräte an

Connectez vos périphériques

Conecte los periféricos

Collegare le periferiche

周辺機器を接続します

连接外围设备

주변기기를 연결합니다

Connect your computers

Schließen Sie Ihre Computer an

Connectez vos ordinateurs

Conecte las computadoras

Collegare i computer

コンピューターを接続します

连接计算机

컴퓨터를 연결합니다

Power up your system

Fahren Sie das System hoch

Mettez le système sous tension

Encienda el sistema

Accendere il sistema

システムの電源を入れます

打开系统的电源

시스템 전원을 켭니다

NOTE: If using a USB device other than a keyboard

or mouse, plug in the external power adaptor.

HINWEIS: Wenn ein USB-Gerät (abgesehen von

Tastatur und Maus) verwendet wird, müssen Sie

den externen Netzadapter anschließen.

NOTA :

Si vous utilisez un équipement USB autre

qu’un clavier ou une souris, branchez l’adaptateur

d’alimentation externe.

NOTA:

Si utiliza un dispositivo USB que no sea

un teclado o un ratón, conecte el adaptador de

alimentación externo.

NOTA:

se si utilizza un dispositivo USB diverso da

una tastiera o un mouse, collegare l’adattatore di

alimentazione esterno.

注：キーボードやマウス以外のUSBデバイスを使

用する場合は、外付けの電源アダプターを使用し

てください。

注：如果使用除键盘和鼠标之外的 USB 设备，请连

接外部电源适配器。

참고: 키보드 또는 마우스 이외의 USB 장치를 사용

하는 경우 외부 전원 어댑터를 연결합니다.

Quick Installation Guide

SwitchView

MM1/MM2

2 or 4-Port USB PS/2 KVM Switch with USB Hub 1.1/2.0

 



   

 









Safety, EMC and Environmental Approvals and Markings

Caution: To ensure safe use of this product, use only the power adaptor provided by the manufacturer.

USA Notiﬁcation

Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Notiﬁcation

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

WEEE

In the European Union, this label indicates that this product should not be disposed of with household

waste. It should be deposited at an appropriate facility to enable recovery and recycling. For information

on how to recycle this product

responsibly in your country, please check with the seller of the product, or

the seller of the product that replaces this product.

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

Hotkey and push-button reference sheet

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

All SwitchView Switches

COMMAND HOTKEYS PUSH-BUTTON DESCRIPTION

Select PC

ScrLk + ScrLk + X

x = 1 ~ 2 or 1 ~ 4 for PC channel number

Press the Select button to

select the next channel

Select the active channel

Next Higher/Lower

Channel

ScrLk + ScrLk + Up Arrow/Down

Arrow

Press the

Select button to

toggle to the next channel

Select the next

connected channel

Beep Sound

On/Off

ScrLk + ScrLk + B N/A Toggle on/off beep sound for switching

confirmation

Autoscan ScrLk + ScrLk + S Press any key to

stop Autoscan

Autoscan through every connected channel for

quick screen browsing of each channel

SwitchView DVI, MM1 and MM2 Switches only

Switch KVM and

USB Hub

(No Audio)

ScrLk + ScrLk + Fx

Fx is the function key that corresponds

to the port number

(F1 ~ Port 1, F2 ~ Port 2,

F3 ~ Port 3, F4 ~ Port 4)

Press the corresponding

button to select the specific

PC + USB hub port control.

Select the PC channel for all USB hub ports

control (joint select PC port and hub port control

if binding is enabled)

Switch KVM and

Audio

(No USB Hub)

ScrLk + ScrLk + Fy

Fy = F5 ~ F8

(F5 ~ Port 1, F6 ~ Port 2,

F7 ~ Port 3, F8 ~ Port 4)

N/A Select the active audio and mic

channel (joint select PC/Audio and mic channel if

binding is enabled

Bind PC and Hub Port

Control Switching

ScrLk + ScrLk + Z N/A Enable the binding of PC port and hub port

control switching (factory default)

Unbind PC and

Hub Port Control

Switching

ScrLk + ScrLk + X N/A Disable the binding of PC port and hub port

control switching

Bind PC and Audio/

Mic Switching

ScrLk + ScrLk + Q N/A Enable the binding of PC port and audio/mic

switching (factory default)

Unbind PC and Audio/

Mic Switching

ScrLk + ScrLk + W N/A Disable the binding of PC port and audio/mic switching

Autoscan with

Programmable

Delay Time

ScrLk + ScrLk + S + X

X = 1 ~ 6

1 - 10” ; 2 - 20” ; 3 - 3” ;

4 - 40” ; 5 - 50” ; 6 - 60”

N/A Specify delay time within a range of 10 ~ 60

seconds (4-port only)

Previous PC Channel ScrLk + ScrLk + (backspace) N/A Toggle between previous channel and current channel

SwitchView DVI and MM2 Switches only

Define Hotkey

Preceeding Sequence

ScrLk + ScrLk + H + (y)

y = ScrLk, Caps Lock, Esc, F12 or

Num Lock

N/A Select the hotkey preceding sequence from the

following: ScrLk, Caps Lock, Esc, F12 or

Num Lock

Autoscan with

Programmable

Delay Time

ScrLk + ScrLk + S + (z)

z = 0 ~ 9

1 - 10” ; 2 - 20” ; 3 - 3” ;

4 - 40” ; 5 - 50” ; 6 - 60” ;

7 - 70” ; 8 - 80” ; 9 - 90” ;

0 - 100”

N/A Specify delay time within a range of 10 ~ 100

seconds

SwitchView PC and MM1 Switches only

Reset KV

M ScrLk + ScrLk + End N/A Reset the KVM switch for switch system reboot

Hotkey sequence

The hotkey sequence

is activated by pressing the

ScrLk

key twice and then entering the desired hotkey command.

NOTE:

The default setting of the SwitchView MM1 USB KVM switch is appropriate for most systems.

However, to utilize a USB keyboard/mouse, you may

need to disable the PS/2 option in the BIOS and enable the USB option instead. In order for your PC to ﬁnd your USB keyboard and mouse, you will need to

sync your hub port control and PC port selection (for example, the green PC port LED and red USB hub port LED should be aligned). Also, USB keyboard

users will NOT be able to utilize the SwitchView MM1 switch hotkey function.

단축키 및 누름식 버튼 참조 표

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

모든 SwitchView 스위치에 적용되는 명령

명령 단축키 누름식 버튼 설명

PC 선택 ScrLk + ScrLk + X

x = PC 채널 번호 중 1 ~ 2 또는 1 ~ 4

Select 버튼을 누르면 다음 채

널 선택

활성화된 채널을 선택합니다.

다음 상위/하위 채널로

이동

ScrLk + ScrLk + 위쪽 화살표/아래쪽

화살표 키

Select 버튼을 누르면 다음 채

널로 이동

다음으로 연결된 채널을 선택합니다.

경보음 켜기/끄기 ScrLk + ScrLk + B 없음 전환 확인을 위한 경보음을 켜거나 끕니다.

자동 검색 ScrLk + ScrLk + S 아무 키를 누르면 자동 검색

중단

각 채널의 빠른 화면 조회를 위해 연결된 모든 채

널을 자동 검색합니다.

SwitchView DVI/MM1/MM2 스위치에만 적용되는 명령

Switch KVM 및 USB 허

브(오디오 사용 안함)

ScrLk + ScrLk + Fx

Fx는 포트 번호(F1 – 포트1, F2 – 포

트 2, F3 – 포트 3, F4 – 포트 4)에 해

당하는 기능 키임

특정 PC + USB 허브 포트 컨

트롤을 선택하려면 해당 버튼

을 누름

모든 USB 허브 포트를 제어하는 PC 채널을 선

택합니다(바인딩되어 있는 경우 PC 포트 및 허

브 포트 컨트롤 동시 선택).

Switch KVM 및 오디오

(USB 허브 사용 안함)

ScrLk + ScrLk + Fy

Fy = F5 ~ F8 기능키

(F5 – 포트 1, F6 – 포트 2,

F7 – 포트 3, F8 – 포트 4)

없음 사용 중인 오디오 및 마이크 채널을 선택합니다

(바인딩되어 있는 경우 PC/Audio 및 마이크 채널

동시 선택).

PC 및 허브 포트 컨트롤

전환 바인딩

ScrLk + ScrLk + Z 없음 PC 포트 및 허브 포트 컨트롤 전환 바인딩을 활

성화합니다(출하 시 기본값).

PC 및 허브 포트 컨트롤

전환 바인딩 해제

ScrLk + ScrLk + X 없음 PC 포트 및 허브 포트 컨트롤 전환 바인딩을 비

활성화합니다.

PC 및 오디오/마이크 전

환 바인딩

ScrLk + ScrLk + Q 없음 PC 포트 및 오디오/마이크 전환 바인딩을 활성

화합니다(출하 시 기본값).

PC 및 오디오/마이크 전

환 바인딩 해제

ScrLk + ScrLk + W 없음 PC 포트 및 오디오/마이크 전환 바인딩을 비활

성화합니다.

지정된 지연 시간 내 자

동 검색

ScrLk + ScrLk + X

X = 1 ~ 6

1 - 10” ; 2 - 20” ; 3 - 3” ;

4 - 40” ; 5 - 50” ; 6 - 60”

없음 10 ~ 60초 범위에서 지연 시간을 지정합니다

(4개 포트만 가능).

이전 PC 채널로 이동 ScrLk + ScrLk + (백스페이스 키) 없음 이전 채널과 현재 채널을 전환합니다.

SwitchView DVI/MM2 스위치에만 적용되는 명령

단축키 우선순위 조합

정의

ScrLk + ScrLk + H + (y)

y = Scroll Lock, Cap Lock, Esc, F12

또는 Num Lock

없음 ScrLk, Caps Lock, Esc, F12, Num Lock 키 중

에서 단축키 우선순위 조합을 선택합니다.

지정된 지연 시간 내 자

동 검색

ScrLk + ScrLk + S + (z)

z = 0 ~ 9

1 - 10” ; 2 - 20” ; 3 - 3” ;

4 - 40” ; 5 - 50” ; 6 - 60” ;

7 - 70” ; 8 - 80” ; 9 - 90” ;

0 - 100”

없음 지연 시간을 10 ~ 100초 범위로 지정합니다.

SwitchView PC/MM1 스위치에만 적용되는 명령

KVM 초기화 ScrLk + ScrLk + End 없음 KVM 스위치를 초기화하여 스위치 시스템을 재

부팅합니다.

단축키 조합

단축키 조합은 ScrLk 키를 두 번 누른 다음 원하는 단축키 명령을 입력하여 사용할 수 있습니다.

참고: SwitchView MM1 USB KVM 스위치의 기본값 설정은 대부분의 시스템에 적합합니다. 그러나 USB 키보드 및 마우스를 활용하기 위해서는

BIOS에서 PS/2 옵션을 해제하고 USB 옵션을 대신 설정해야 할 수도 있습니다. PC에서 USB 키보드 및 마우스를 찾으려면 허브 포트 컨트롤 및

PC 포트 선택을 동기화해야 합니다. 예를 들어, 녹색 PC 포트 LED와 적색 USB 허브 포트 LED가 모두 켜져야 합니다. 또한, USB 키보드 사용자는

SwitchView MM1 스위치 단축키 기능을 사용할 수 없게 됩니다.

Page is loading ...

Quick Installation Guide

SwitchView

DVI

2 or 4-Port DVI USB KVM Switch

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

Connect the power supply

Schließen Sie die Stromversorgung an

Connectez la source d’alimentation

Conecte la fuente de alimentación

Collegare l’alimentazione

電源に接続します

连接电源

전원 공급 장치를 연결합니다

Connect your peripherals

Schließen Sie die Peripheriegeräte an

Connectez vos périphériques

Conecte los periféricos

Collegare le periferiche

周辺機器を接続します

连接外围设备

주변기기를 연결합니다

Connect your computers

Schließen Sie Ihre Computer an

Connectez vos ordinateurs

Conecte las computadoras

Collegare i computer

コンピューターを接続します

连接计算机

컴퓨터를 연결합니다

Power up your system

Fahren Sie das System hoch

Mettez le système sous tension

Encienda el sistema

Accendere il sistema

システムの電源を入れます

打开系统的电源

시스템 전원을 켭니다

NOTE: If using a USB device other than a keyboard

or mouse, plug in the external power adaptor.

HINWEIS: Wenn ein USB-Gerät (abgesehen von

Tastatur und Maus) verwendet wird, müssen Sie

den externen Netzadapter anschließen.

NOTA :

Si vous utilisez un équipement USB autre

qu’un clavier ou une souris, branchez l’adaptateur

d’alimentation externe.

NOTA:

Si utiliza un dispositivo USB que no sea

un teclado o un ratón, conecte el adaptador de

alimentación externo.

NOTA:

se si utilizza un dispositivo USB diverso da

una tastiera o un mouse, collegare l’adattatore di

alimentazione esterno.

注：キーボードやマウス以外のUSBデバイスを使

用する場合は、外付けの電源アダプターを使用し

てください。

注：如果使用除键盘和鼠标之外的 USB 设备，请连

接外部电源适配器。

참고: 키보드 또는 마우스 이외의 USB 장치를 사용

하는 경우 외부 전원 어댑터를 연결합니다.

Quick Installation Guide

SwitchView

MM1/MM2

2 or 4-Port USB PS/2 KVM Switch with USB Hub 1.1/2.0

 



   

 









Safety, EMC and Environmental Approvals and Markings

Caution: To ensure safe use of this product, use only the power adaptor provided by the manufacturer.

USA Notiﬁcation

Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Notiﬁcation

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

WEEE

In the European Union, this label indicates that this product should not be disposed of with household

waste. It should be deposited at an appropriate facility to enable recovery and recycling. For information

on how to recycle this product

responsibly in your country, please check with the seller of the product, or

the seller of the product that replaces this product.

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

Page is loading ...

Avocent SWITCHVIEW PC Quick Installation Manual

Brand: Avocent

Model: SWITCHVIEW PC

Category: KVM switches

Type: Quick Installation Manual

This manual is also suitable for

SwitchView SwitchView PC

Download PDF

report

Avocent SWITCHVIEW PC Quick Installation Manual

This manual is also suitable for

Avocent SWITCHVIEW PC Quick Installation Manual

in other languages

Related papers

Other documents