Page is loading ...
M62
User Manual
Product Specification
Bluetooth Name: M62
Bluetooth Version: 5.1
Power Input: DC 5V
Sensitivity: 100±3DB/1KHz
Battery Capacity: 3.7V/33mAh
Charging Box Capacity: 3.7V/500mAh
Charging Duration: About 90 Minutes
Call Duration: about 5 Hours
Listening Duration: about 6 Hours
Stand-by Time: About 120 Hours
Frequency Range: 20-20kHz
Support Agreement: HSP / HFP / A2DP / AVRCP
Packing List
Bluetooth Headset Host (Left and Right)
Earphone Charging Case
User Manual
USB Cable
Gift box
R/L Click Play/Pause Answer/Hang up
R/L long press 2 seconds Refuse
R/L 3-seconds press for power on
R/L 6-seconds press for Power off
R/L 3 clicks
R/L 5 clicks
R Double Clicks: Next Song
L Double Clicks: Previous Song
Product Diagram
1. USB Port
2. Multi-function Touch Area
3. Earphone Indicator Light
4. Charging Case Indicator Light
5. Earphone Charging Button
6. Charging Button of Charging Case
The headset
1, charging: red breathing light flashing
2, fully charged: lights off
3. Low power: red light flashes with low power alarm sound
4. Power on/pairing: red and blue lights flash alternately
5, paired : one of the hosts alternates red and blue, and the other lights go out
6. Connect to mobile phone: lights off
7, game mode: blue light breathing rhythm flashing
Charge box
1. When charging box power put in , the red light flashes
2. When the battery is fully charged, the red light is steady on. Please pull out the charging
cable in time
3. The charging box light flashes when the cover is opened, and bluetooth headset is
turned on
4. Close the cover of the charging box to charge the Bluetooth headset
Charging Box Description
With 300MAH charging box, can charge the earphone for about 3 times, meet the needs
of listening to music outside for a long time.The red LED lights on the left and right
earphones blink during charging and turn off after charging full.
(During the charging of the charging box, the red light of the charging box will be on, and
when it is full, the red light will be steady on. Please disconnect the charging box from the
charging device.)
earphone instructions:
1. Open box ,take the earphone from the package, tear off the blue insulation patch, and
then put the earphone into the charging box, close the charging box cover, and activate
the earphone (or long press for 3 seconds to activate the earphone, when the red and
blue lights blink alternately).
2. Open the cover of the charging box, and the left and right earphones will flash red and
blue alternately, which will be paired automatically.Paired successfully, only one
earphone's red and blue light flashes and the other light goes off.
3. Turn on the bluetooth of the mobile phone, find the name of the M62 Bluetooth device
on the device, click Connect, and the headset will hear the voice (Connect) indicating that
the connection is successful.
4. Automatic connection
Open the cover of the charging box, and if the earphone has been connected to the phone
before, the ear will automatically connect to the last connected phone
Manual pairing method: Turn off the bluetooth of the mobile phone, Hit three times in a
row after the earphone is turned on, the earphone is turned off, and then put the earphone into
the charging box. Do the same for the other earphone, close the charging cover, charge the
earphone, and then open the charging cover.The left and right ears will start pairing
automatically (only one of the earphones will blink red and blue), and the pairing will wait
within 10 seconds.
turn off
Press the touch area of the left and right earphones for 6 seconds, and then power off
after the red light blinks three times.Put earphones into the charging box to charge, and
the earphone will also turn off (the earphone will turn off automatically if it is not connected
for five minutes).
Q&A
The bluetooth device cannot be found on the phone
Remove all bluetooth pairing data stored on the phone, then turn on the phone's Bluetooth
again and search for the device.
Headphones only have sound on one side?
1. Check whether both earphones are powered on
2. Check whether both earphones are turned on
3. Check whether the two earphones are paired successfully
The earphone is stuck or disconnected when talking or listening to music
1. The battery of bluetooth headset is low
2. The distance between the mobile phone and the Bluetooth headset is more than 10
meters
3. There is a large area of signal shielding between the mobile phone and bluetooth
headset, such as a wall.
4. The left and right ears are not synchronized. You are advised to power off the device
and reconnect the left and right ears.
Bluetooth headphones sound less than ideal?
New earphones need a cooking process, it is recommended to play music step by step,
after a period of time, the audio quality of earphones in each audio stage will be improved.
Product quality warranty card
Customer name:
E-mail:
Contact Address:
Product Model:
Questions briefly
/
