Universal Security Grip Kiosk Stand
PAD-USGTW
INSTALLATION - MANUAL
INSTALLATION:
1. Assembling Base to Body 2. Cable Routing / Cable Management
Optional
Locking Base Rotation
Turn clockwise with provided tool to prevent body
rotation using the provided allen key tool (J).
1A. Align holes at the base (B)
with the holes on the base of
the body (A). Screw in bolts (E)
with the provided allen key tool
(J) as shown.
2A. Identify the hole at the bottom of the
base (B) through where cable routing
should go. Then, fish the cable.
2B. Fish the cord through the base and out of the top
to properly tuck away cord as shown above.
CONTENTS: I
x3 K
x1
J
x1
M5 Allen Key
A
x1
B
x1
E
x4
M5 x 8
D
x2
F
x4
M5 x 12
G
x4
M5 Hex Nut
H
x3
C
x1
E
AA
B
J
B
J
**Cables shown for illustration
and NOT INCLUDED.
Optional
Mounting into Surface
I
H
For a more permanent static setup, use a screwdriver (not included) and rotate in 3 screws
(I) as illustrated into 3 predrilled holes with the anchors (H) inserted until securely fastened.
**Screwdriver shown for
illustration and NOT
INCLUDED.
**Cables shown for illustration
and NOT INCLUDED.
3. Inserting Tablet into Holder
3A. Take the holder (C) and insert the key (K) to make sure you have the arms unlocked.
Extend the arms out to match the corners of the tablet (not included).
K
C
**Tablet shown for illustration
and NOT INCLUDED.
3B. Retract the holder on the outside of the tablet as illustrated. Lock the key to secure into
place.
4. Attaching Holder with Kiosk Body
4A. Align tablet holder VESA holes with the Kiosk body VESA plate holes. Rotate in with the provided tool until securely fastened.
J
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
CTA ADD-USGTBP Owner's manual
-
-
-
-
-
CTA PAD-PARAWPCL Owner's manual
-
-
-
-