LoD Offroad JWD0791 Installation guide

Brand
LoD Offroad
Model
JWD0791
Type
Installation guide
JWD0790 - REV 1 10/23/19 Page 1
JK WIND DEFLECTOR
DESTROYER SERIES
*PLEASE READ THROUGH THE
INSTRUCTIONS BEFORE BEGINNING
ANY PART OF THE INSTALLATION
PROCESS*
JK
2
1
NOTES:
JWD0790 = BARE STEEL OPTION
1.
JWD0791 = BLACK POWDER COAT OPTION
2.
ITEM
NO.
PART NUMBER
DESCRIPTION
QTY.
1 2JWD0790-01
JK WIND DEFLECTOR
1
2
TR1002
RUBBER EDGE TRIM BULB SEAL
48"
N/A
JK WIND DEFLECTOR
JWD0790
JWD0791
SHEET 1 OF 1
9/3/2019
MCH
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:4
REV
DWG. NO.
DESCRIPTION:
NAME
DATE
MFG APPR.
ENG APPR.
CHECKED
DRAWN
BLACK POWDER COAT
FINISH:
MATERIAL:
DIMENSIONS ARE IN INCHES
TOLERANCES:
0.010
ANGULAR: MACH
1
TWO PLACE DECIMAL
0.015
THREE PLACE DECIMAL
0.005
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DRAWING IS THE SOLE
PROPERTY OF LOD LLC. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF LOD LLC IS
PROHIBITED.
LOD LLC.
A
SHEET SIZE: B
-
ECO:
JWD0790 - REV 1 10/23/19 Page 2
Your Wind Deector is installed between the
Base Rack Windshield Hoop and the Slide Beam
of the Sliding Rack Option.
You can install the Wind Deector at anytime
simply by removing the 6 Button Head Screws.
Carefully lift up on the Slide Beam and insert the
Wind Deector as shown below.
Adjust the position of the Wind Deector so
that the Rubber Edge Trim is compressed
against the windshield.
JWD0790 - REV 1 10/23/19 Page 3
JK Jeep
Destroyer Series
ROOF RACK
WIND DEFLECTOR
SHIPPING SHEET
Packaged by:
________________________
On:
________________________
Instruction
Booklet
BULB SEAL
TR1002
(48 INCHES)
WIND DEFLECTOR
2JWD0790-01
(X1)
  • Page 1 1
  • Page 2 2
  • Page 3 3

LoD Offroad JWD0791 Installation guide

Brand
LoD Offroad
Model
JWD0791
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents